MOBASE ELECTRONICS SEKS-FS10APM Remote Keyless Entry System User Manual

Daedong Co. Ltd. Remote Keyless Entry System Users Manual

User manaul

0. GENERAL0.1. MakeShinchang Electrics Co.,Ltd.0.2. Model No.- Transmitter : SEKS-TF10ATx - Receiver : SEKSFS10APM 0.3. Name and address of manufacturerShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.0.4. Address of assembly plantShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.THN Co., Ltd. 973-3 Galsan-Dong, Dalseo-Gu, Daegu, korea.
2. PRODUCT SPECIFICATION2.1 SCOPE OF REMOTE KEYLESS ENTRY SYSTEM2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER drives the actuator.2.2 SPECIFICATIONS2.2.1 TRANSMITTER2.2.2 RECEIVER Storage temperature range -30 ~ 80℃ Modulation FSKITEM SPECIFICATIONRated supply voltage DC 3VOperating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃ Frequency 315MHz Code Rolling Code(Hopping Algorithm) Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Electric field strength 10mW (433.92MHz)Below than 5mA Operating Temperature - 30 ~ + 80℃Max Humidity 95% Standby Current (in alarm setting condition)SpecificationItem DC 9 ~ 16V Operating Voltage DC 12V Rated Supply Voltage
3. USER MANUAL3.1 NAME : IPM system- This system is IPM and inculdes RKE. - RKE in IPM system is intended for auto door lock or unlock or PANIC in vehicle. - This IPM system is to be installde on motor vehicles as *OE item. *OE : Original Equipment. *IPM : Anti Theft Alarm System. *RKE : Remote Keyless Entry.3.2 SYSTEM CONSTRUCTION3.2.1 SYSTEM IN VEHICLE3.2.1 SYSTEM FOR TEST * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or PANIC output signal. ANTENNA BATTERYDOORACTUATORROLLINGCODEANTENNARECEIVERBATTERYlampRECEIVERLOCK or UNLOCK or PANIC DATAROLLING CODE(315MHz)
2.3 Operating summary① TRANSMITTER's button is pushed.② TRANSMITTER sends the code by radio frequency.③ RECEIVER gets the code and decodes it.④ RECEIVER judges the code whether it is right code or not.⑤ RECEIVER checks door lock or unlock⑥ RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.2.4 Caution① Danger of explosion if battery is incorrectly replaced.② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions.

Navigation menu