MOBASE ELECTRONICS SEKS-KM08RX REMOTE KEYLESS ENTRY SYSTEM (receiver) User Manual KMEtacs fcc ic

Daedong Co. Ltd. REMOTE KEYLESS ENTRY SYSTEM (receiver) KMEtacs fcc ic

Users manual

Title : Date : October 08, 20070. GENERAL0.1. MakeShinchang Electrics Co.,Ltd.0.2. Model No.- Transmitter : SEKS-KM08Tx- Receiver : SEKS-KM08Rx0.3. Name and address of manufacturerShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.0.4. Address of assembly plantShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TVINTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THISEQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TOOPERATE THE EQUIPMENT.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, includinginterference that may causeundesired operations.Information Document
Title : NO. : SCE-0713 Date : 08. October. 20071. PRODUCT SPECIFICATION1.1 Scope of Remote Keyless Entry in ETACS system.1.1.1 Key part : Transmitter is inside of the remote key, and it sends the rolling code to the receiver by radio frequency. 1.1.2 Receiver : It receives the rolling code and decodes that, thereafter receiver drives the actuator.1.2 Specification1.2.1 Transmitter1.2.2 ReceiverPage 3 of 12 Storage temperature range -30 ~ 80℃ Modulation FMItem SpecificationRated supply voltage DC 3VOperating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃ Electric field strength 0.01mW Frequency 315MHz Code Rolling Code(Hopping Algorithm) - 30 ~ + 80℃Max Humidity 95% Battery life 2 Year(Lithium 3V 1EA)Below than 6mA(in alarm setting condition) Standby Current SpecificationItem DC 9 ~ 16V Operating Voltage DC 12V Rated Supply Voltage Operating Temperature Information DocumentInformation Document
Title : NO. : SCE-0713 Date : 08. October. 20072. USER MANUAL2.1 Name : ETACS system- This system is ETACS and includes RKE.- RKE in ETACS system is intended for auto door lock or unlock in vehicle.- This ETACS system is to be installed on motor vehicles as *OE item. * OE : Original Equipment. * ETACS : Electronic Time & Alarm Control System. * RKE : Remote Keyless Entry.2.2 System construction2.2.1 System in vehicle2.2.1 System for test * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock output signal. Page 4 of 12Information DocumentInformation DocumentInformation DocumentInformation DocumentANTENRECEIVERBATTERYDOORACTUATORROLLINGANTENNARECEIVERBATTERYDOORACTUATORROLLINGCODEANTENNARECEIVERBATTERYLOCK or UNLOCKDATALEDROLLINGCODE
Title : NO. : SCE-0713 Date : 08. October. 20072.3 Operating summary① Transmitter's button is pushed.② Transmitter sends the code by radio frequency.③ Receiver gets the code and decodes it.④ Receiver judges the code whether it is right code or not.⑤ Receiver checks door lock or unlock state.⑥ Receiver drives the actuator.⑦ Receiver drives the horn2.3.1 Lock & UnlockIf transmitter's button is pushed, Transmitter sends the code.2.4 Caution① Danger of explosion if battery is incorrectly replaced. ② Replace only with the same or equivalent type recommended by the manufacturer.③ Dispose of used batteries according to the manufacturer's instructions.Page 5 of 12Information DocumentInformation Document

Navigation menu