MOBASE ELECTRONICS SYEC3FOB1611 FOB-SMART KEY User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3061987
Application ID	5qh3hQZfN1omDzB5C6tuuw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.9kB (98800 bits)
Date Submitted	2016-07-12 00:00:00
Date Available	2017-01-08 00:00:00
Creation Date	2016-06-08 18:45:14
Producing Software	NesPDF
Document Lastmod	2016-07-13 09:56:48
Document Title	YB_FOB_인증_제품_매뉴얼(영문)_160527.xls
Document Creator	YB_FOB_인증_제품_매뉴얼(영문)_160527.xls
Document Author:	hs

Title :
NO.
Information Document
Date
SHT/SHTS : 2/11
0.
GENERAL
0.1.
Make
SEOYON ELECTRONICS Co.,Ltd.
0.2.
Model No.
- Transmitter : FOB-SMART KEY
- Receiver : SMART KEY SYSTEM
0.3.
SYEC3FOB1611
Name and address of manufacturer
SEOYON ELECTRONICS Co.,Ltd.
424, Sinwon-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea
0.4.
Address of assembly plant
SEOYON ELECTRONICS Co.,Ltd.
424, Sinwon-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea
Title :
NO.
Information Document
Date
SHT/SHTS : 3/11
2.
PRODUCT SPECIFICATION
2.1
Scope of RKE, passive entry control, passive start control in SMART Key system.
2.1.1
FOB KEY : It has the functions for passive entry and passive start including
RKE functions. It also has the TP for emergency authentication for passive start
2.1.2
SMART Key system : It is an ECU to control the whole smart key system.
It has the functions such as passive entry control, passive start control, RKE functions.
2.2
SPECIFICATIONS
2.2.1
FOB KEY
2.2.2
ITEM
SPECIFICATION
Rated supply voltage
DC 3V
Operating voltage range
DC 2.5 ~ 3.2V
Operating temperature range
- 10 ~ + 60℃ with Battery
Storage temperature range
- 40 ~ + 85℃ without Battery
Modulation
FSK
Frequency
433.92MHz
Code
Rolling Code(Hopping Algorithm)
Electric field strength
10mW (433.92MHz)
Battery life
2 Year(10Times/Day)(Lithium 3V 1EA)
Item
Specification
RECEIVER
Rated Supply Voltage
DC 12V
Operating Voltage
DC 9 ~ 16V
Operating Temperature
- 35 ~ + 75℃
Max Humidity
95%
Standby Current
Below than 5.5mA
(in alarm setting condition)
Title :
NO.
Information Document
Date
SHT/SHTS : 4/11
2.3
Operating summary
-RKE
① TRANSMITTER's button is pushed.
② TRANSMITTER sends the code by radio frequency.
③ RECEIVER gets the code and decodes it.
④ RECEIVER judges the code whether it is right code or not.
⑤ RECEIVER checks door lock or unlock, trunk state.
⑥ RECEIVER drives the actuator.
- Passive Start
① the SSB button of SMK is pressed to start the engine.
② The indoor ANT of the car transmits the code via the Low Frequency.
③ Fob(receiver) decrypts the received code from SMK.
④ Fob transmits the code via radio frequency.
⑤ SMK should check the boot state.
⑥ SMK controls a start-up operation and the transition of supply power.
2.3.1
LOCK & UNLOCK
① If LOCK or UNLOCK button is pushed for less than 1 sec,
then TRANSMITTER sends the LOCK or UNLOCK DATA.
② If TRUNK button is pushed for more than 1 sec, then
TRANSMITTER sends the TRUNK DATA.
2.4 Caution
① Danger of explosion if battery is incorrectly replaced.
② Replace only with the same or equivalent type recommended by the
manufacturer.
③ Dispose of used batteries according to the manufacturer's instructions.
Title :
NO.
Information Document
Document
Information
Information
Document
Date
SHT/SHTS : 5/11
3.
USER MANUAL
3.1
ITEM
: SMK system
- This system is SMK and inculdes RKE.
- RKE in SMK system is intended for auto door lock or unlock or TRUNK in vehicle.
- This SMK system is to be installde on motor vehicles as *OE item.
*OE : Original Equipment.
*SMK : Smart Key System
*RKE : Remote Keyless Entry.
3.2
SYSTEM CONSTRUCTION
3.2.1
SYSTEM IN VEHICLE
Radio Frequency
(433.92MHz)
ANTENNA
BATTERY
LF ANT
SMK
Low Frequency
(134.2KHz)
3.2.2
SSB
SYSTEM FOR TEST
Radio Frequency
(433.92MHz)
ANTENNA
BATTERY
LF ANT
SMK
Low Frequency
(134.2KHz)
SSB
① Connect the 12V power supply and turn on the switch
② Pressing the white tact switch, LF signal is transmitted and FOB LED and SMK LED is fla hes
③ When the tact switch is pressed repeatively, FOB LED and SMK LED is flahes, repeatively.
* It shows the status of operation through the LED used.
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to the
following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is
connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human
contact during normal operation. The antenna should not be contacted during operation
to avoid the possibility of exceeding the FCC radio frequency exposure limit.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : hs
Create Date                     : 2016:06:08 18:45:14+09:00
Modify Date                     : 2016:07:13 09:56:48+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : NesPDF
Creator Tool                    : YB_FOB_인증_제품_매뉴얼(영문)_160527.xls
Metadata Date                   : 2016:07:13 09:56:48+09:00
Format                          : application/pdf
Title                           : YB_FOB_인증_제품_매뉴얼(영문)_160527.xls
Creator                         : hs
Document ID                     : uuid:13934c8f-9686-48c2-9a85-2b8ae97817d3
Instance ID                     : uuid:f2154192-ff5a-4560-a356-c65d6d3f09d5
Page Mode                       : UseNone
Page Count                      : 5

EXIF Metadata provided by EXIF.tools