MOBIWIRE MOBILES FUNVALUEL Smartphone User Manual H4007 Entel English UM for FCC 20161222

MOBIWIRE MOBILES (NINGBO) CO.,LTD Smartphone H4007 Entel English UM for FCC 20161222

User Manual

Download: MOBIWIRE MOBILES FUNVALUEL Smartphone User Manual H4007 Entel English UM for FCC 20161222
Mirror Download [FCC.gov]MOBIWIRE MOBILES FUNVALUEL Smartphone User Manual H4007 Entel English UM for FCC 20161222
Document ID3268449
Application IDxQ5yXtft+itU36kNZEO1xA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize15.57kB (194680 bits)
Date Submitted2017-01-24 00:00:00
Date Available2017-01-24 00:00:00
Creation Date2017-01-23 10:00:32
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2017-01-23 10:01:20
Document TitleH4007 Entel English UM for FCC 20161222
Document CreatorAdobe Illustrator CS4
Document Author: Administrator

Safety
In order to ensure the phone is used safely and correctly, please read the
precautions below carefully before use.
1.1 General precaution
gYour phone is only suitable for the battery and charger approved by our
company or else it may cause the battery to leak, overheat, explode or even
catch fire.
gDo not knock, vibrate or throw the phone heavily to avoid malfunction,
fire, overheating, explosion or fire.
gIf there are abnormal phenomena, like temperature rising, color change
or distortion during the usage, charging or storage of the battery, please
stop using it and replace it with a new battery.
gIt may burn the skin if liquid in the battery leaks onto skin or clothes. If this
happens please flush with plenty of clean water immediately and go to a
hospital at once.
gPlease keep the battery away from fire to avoid fire and explosion if the
battery leaks or emits a strange smell.
gDo not place expose the battery to moisture or it may cause overheating,
fumes and corrosion.
gDo not use or place the battery under direct sunlight, or in hot places or,
it may cause leakage and overheating, thus reducing performance and
shortening the lifespan.
gDo not charge the battery for over 24 hours continuously.
gUse careful with the earphone maybe possible excessive sound pressure
from earphones and headphones can cause hearing loss
1.2 Precaution for the use of charger
gDo not cause short circuit to the charger, or it may cause electric shock,
fumes and damage to the charger.
gDo not use the charger if the power wire is broken, or it may cause fire
and electric shock.
gPlease remove accumulated dust on the power plug.
gDo not put water containers next to the power supply to avoid
overheating, fire, electric shock and malfunction in case they come into
contact.
gDo not disassemble or tamper with the charger or it may cause personal
injury, electric shock, fire and the damage of the charger.
gDo not use the charger in places of high humidity, like bathrooms, or it
may cause electric shock, fire and damage of charger.
gDo not touch the charger, power cord or power plug with wet hands or it
can cause electric shock.
gDo not put heavy objects on the power cord or change the power cord or
it may cause electric shock and fire.
gPlease unplug the power socket before cleaning and maintenance.
gPlease hold the charger to unplug the socket as pulling the power cord
may damage the power wire and cause electric shock and fire.
1.3 Cleaning and maintenance
gAs the phone, battery and charger are not waterproof, do not use them in
places of high humidity and avoid them being wet by rain.
gPlease clean the battery and charger with a soft dry cloth.
gNever use alcohol, thinner or solutions, like benzene, to wipe the phone.
gDirty sockets can cause poor contact and power down, and even make
recharging unavailable. So, please clean them periodically.
1.4 Common Precaution
Mobile Phone:
gPlease use the phone in an environment with temperature between
-10 C- 40 C and humidity of ≦75%.
gPlease use the phone far away from regular telephones, TV sets, radio
sets and office automation equipment, to avoid affecting the normal use of
these equipments and mobile phone.
Battery:
gStore the battery in cool and ventilated place without direct sunlight.
gThe battery has a limited lifespan. The usage of battery will be shortened
progressively due to frequent charging. Once the battery is out of use, it
means that its lifespan has ended, and you will need to replace it with an
approved new battery.
gDo not dispose of old batteries as household waste. Give them to
specified disposal places and follow any stipulated instructions for disposal.
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
Charger:
gDo not charge under following conditions:
-- places with direct sunlight
-- places with ambient temperature less than -10OC or over 40OC, wet or
dusty places with strong vibrations (it may cause malfunction);
-- places near electrical appliances (it may affect the image and sound) like
TV set, radio, etc.
-- Adapter shall be installed near the equipment and shall be easily
accessible.The plug considered as disconnect device of adapter
Getting to know your touch phone
Starting up the device
SAR
To install the SIM card
gOpen the SIM card and Memory card rubber.
gLocate the SIM card slot, and then insert the SIM card with its gold
contacts facing up.
Note: The phone support one SIM card. The card will support 3G card
and 2G card. If you need to use 4G/3G operation, please insert a 4G/3G
card in the card slot
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply With
RF exposure requirements, a minimum separation distance of 1.5cm must
be maintained between the user’s body and the handset, including the
antenna.
Third-party belt-clips, holsters, and similar including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that
do not meet these requirements may not comply with RF exposure
requirements and should be avoided.
To install a memory card
gOpen the SIM card and Memory card rubber.
gLocate the Memory card slot, and then insert the Memory card with its gold
contacts facing up.
Charging the Battery
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you install and charge the battery. Some
batteries perform best after several full charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with your device
must be used to charge the device.
Connect the USB connector of the AC adapter to the sync connector on your
device, and then plug in the AC adapter to an electrical outlet to start
charging the battery.
As the battery is being charged while the device is on, a charging icon
appears in the title bar of the Home screen. After the battery has been fully
charged, a full battery icon appears in the title bar of the Home screen.
Warning:
             
the AC or car adapter.
          
Power on/off
To power off your phone, press & hold POWER. On release, the Phone
options menu opens. Select ‘Power off’ and confirm.
To power on again, press & hold POWER.
This Model Meets International Guidelines for Exposure to Radio Waves.
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by
international guidelines. These guidelines were developed by the
independent scientific organization ICNIRP and include safety margins
designed to assure the protection of all persons, regardless of age and
health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6 W/kg
and the highest SAR value for this device when tested at the ear was 0.7
W/kg per 10 gram of tissue. As mobile devices offer a range of functions,
they can be used in other positions, such as on the body as described in
this user guide. it is recommended to keep it away from your body at least
10mm during operation, but the distance of 0mm between the head and
the device.
As SAR is measured utilizing the devices highest transmitting power the
actual SAR of this device while operating is typically below that indicated
above. This is due to automatic changes to the power level of the device
to ensure it only uses the minimum level required to reach the network.
The World Health Organization has stated that present scientific
information does not indicate the need for any special precautions for the
use of mobile devices. They note that if you want to reduce your exposure
then you can do so by limiting the length of calls or using a 'hands-free'
device to keep the mobile phone away from the head and body.
Additional Information can be found on the websites of the World Health
Organization (http://www.who.int/emf).






1. Switch MainMenu style
(1) In default Home screen, slide your fingertip left and right along the
screen to reveal the more home screen.
2. Home screen
(1) Read your notifications
When you see a notification in the status bar, touch the bar and slide
your finger down the screen to open the list of notifications displayed in
the sliding window.
Ongoing notifications report activities such as call forwarding ON,
current call status, song playing.
Notifications report the arrival of new messages, calendar events, and
alarms. You can clear notifications list by selecting ‘Clear’ notifications
at the top of the notifications window.
To open the message, reminder, or other notification, you can touch the
items. To close the notifications window, slide your finger up the screen.
(2) Create Home screen shortcuts and widgets:
From the Home screen, touch and hold the blank screen, and select
‘Widgets’. Enter the main menu screen, slide your fingertip left to
reveal the widget, select a shortcut to some of your saved information
(such as a play list), a widget (a clock) for your Home screen.
(2) On Home screen, click icon on the bottom of the screen (Main menu
icon) to enter the main menu screen, slide your fingertip left and right
along the screen to reveal the more applications.
(3) Move objects on the Home screen
gTo move an icon or other item on the Home screen, you must first
touch & hold it to enter move mode. The object will magnify when it’s
ready to be moved.
gWithout lifting your finger (or you’ll drop out of move mode), drag the
object to the new position. To move an item to a section of the Home
screen not in view, move it to the edge of the screen and hold it there
for a moment. The screen view will shift; position the object and
release.
3. Camera
All the pictures you can capture or view on
your phone are stored on a memory card,
which is the phone storage or the installed
SD card in your phone. Before you use the
Camera or view pictures in Gallery, make
sure you have a card installed.
5. U-disk storage
This phone supports movable storage, i.e., the U-disk function.
When the phone is switched on, you can see the icon in the status bar
on the top of the screen when it’s connected to a PC by a data line. Touch
the bar and slide your finger down the screen to open the list of
notifications displayed in the sliding window. Select [USB connected] and
touch [Turn on USB storage] to confirm,then you can use the phone as a
U-disk.
The product shall only be connected to a USB interface of version
USB2.0
4. GPRS/WLAN network
Your device’s networking capabilities allow you to access the Internet or
your corporate network through WLAN, GPRS, or WCDMA (if SIM card
supported).
You can also add and set up a VPN or proxy connection.
To use WLAN on your device, you need access to a wireless access point
or “hotspot”.
Note: The availability and range of your device’s WLAN signal depends on
the number, infrastructure, and other objects through which the signal
passes.
To open the Browser you need to be connected to a network.
7.Bluetooth
The phone supports Bluetooth(BT) functions, you can establish a wireless
connection between the phone with other compatible devices, and data
transmission, you can establish a wireless connection between devices in
the phone with a distance of up to 10 meters. Bluetooth connection may be
interference by obstacles, such as walls or other electronic device.
1. Enter the setting menu, Touch the Bluetooth to open the function, idle
screen will display BT icon in the status bar.
2. Open the BT discoverable, and other devices can search the phone.
3. Before using the phone as a Bluetooth device, you need to pair the
phone with the target device as follows:
-Sure your phone has Bluetooth-enabled.
-Touch "Scan for devices." Bluetooth devices within the range of the phone
will start scanning.
-Touch the device you want to pair, to confirm password to complete the
pairing
You can use Bluetooth to share the pictures, videos or music files with
family and friends
8.MAPS
The phone supports GPS function and built in google maps app, maps can
provide contain administrative zones and transportation, and business
information of vector maps, satellite images of different resolution, and can
be used to display the terrain and terrain contour view.
6. Music
Your music is organized into four
categories: Artists, Albums, Songs and
Playlists. Select a category to view the
lists within each. Once in a category, keep
selecting until you reach the music you
want to play.
9. FM radio
The phone supports FM radio, bug you
need an earphone as antenna , please
plug in earphone before searching for
channels.
Technical Specification
Weight: 111.8g (Including battery)
Dimensions: 121*64.6*10.65mm
Band: GSM900MHz/DCS1800MHz/GSM850MHz/PCS1900MHz/
WCDMA1900MHz/WCDMA850MHz
Battery Type: Li-ion
Battery Voltage:4.2V
Battery Capacity: 1400mAH
Talk Time: about 7.5h
Standby Time: about 300h
Battery Time (No prior or separate notice is required for capacity
changes)
Note: Actual operating conditions depend on the local network
environment, SIM, and user behavior.
Warning: Any consequence caused by misuse, abuse, or not
following any and all of the above-written suggestions and
instructions shall not hold the producer in any way responsible to
any degree.
Announcement: The manufacturer reserves the right to change or
upgrade specifications or software versions without prior or
separate notice. Trade marks mentioned or used in this material
belong to their respective owners.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
§ 15.21 Information to user. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
§ 15.105 Information to the user. Note: This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 1.0 cm must be maintained
between the user’s body and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be avoided. Use only the supplied
or an approved antenna.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:01:23 10:00:32+08:00
Modify Date                     : 2017:01:23 10:01:20+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : H4007 Entel English UM for FCC 20161222
Creator                         : Administrator
Creator Tool                    : Adobe Illustrator CS4
Metadata Date                   : 2017:01:23 10:01:20+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 244
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 4644 bytes, use -b option to extract)
Document ID                     : xmp.did:EE4CD2DA26C8E61199639342308C1385
Instance ID                     : uuid:1111750e-6203-451a-ade1-8c36afc23922
Rendition Class                 : proof:pdf
Original Document ID            : uuid:41AA05A2A8E6E1119930A062E252D955
Derived From Instance ID        : uuid:72f4d8a1-7c70-4daf-a85e-622d0b9f3c90
Derived From Document ID        : xmp.did:B74ECF62EFB0E511AFF2B7DAAE81A602
Derived From Original Document ID: uuid:41AA05A2A8E6E1119930A062E252D955
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:EBDAF8274F1EE211BD3EC5A70510E5FA, xmp.iid:1F3A1C55BFF5E3118536AB0829683D24, xmp.iid:203A1C55BFF5E3118536AB0829683D24, xmp.iid:B9E0DD22F9F5E3118C87DCA44AFAEE8E, xmp.iid:5D8CFC0A02F6E311AA99FEBA338D6452, xmp.iid:C122F95E02F6E3118192BC08C239B58D, xmp.iid:B74ECF62EFB0E511AFF2B7DAAE81A602, xmp.iid:EE4CD2DA26C8E61199639342308C1385
History When                    : 2012:10:25 10:53:29+08:00, 2014:06:17 09:33:06+08:00, 2014:06:17 09:34:33+08:00, 2014:06:17 16:26:53+08:00, 2014:06:17 17:30:38+08:00, 2014:06:17 17:32:59+08:00, 2016:01:02 09:23:10+08:00, 2016:12:22 17:13:08+08:00
History Software Agent          : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4
History Changed                 : /, /, /, /, /, /, /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20160101-120438.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\H4007V_手机示意图_1222[OWN].jpg, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-163538.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-163436.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-163404.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-163258.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-162822.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-162212.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-162159.png, E:\说明书\MTK 说明书\Smart phone\H353F\11.JPG, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-162047.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-162047.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-162057.png, F:\说明书\MTK 说明书\Smart phone\H4007V ENTEL\Screenshot_20161222-163531.png
Manifest Reference Instance ID  : xmp.iid:902DD12824C8E61190959B9850CDF67E
Manifest Reference Document ID  : xmp.did:902DD12824C8E61190959B9850CDF67E
Manifest Reference Rendition Class: proof:pdf
Producer                        : Acrobat Distiller 9.0.0 (Windows)
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 650.522222
Max Page Size H                 : 291.356893
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT, AdobeSongStd-Light, SimSun, SimHei, ArialNarrow-Bold
Font Family                     : Arial, Arial, Adobe 宋体 Std, 宋体, 黑体, Arial
Font Face                       : Bold, Regular, L, Regular, Regular, Narrow
Font Type                       : Open Type, Open Type, Open Type, TrueType, Open Type, Open Type
Font Version                    : Version 5.06, Version 5.06, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106, Version 5.03, Version 5.01, Version 2.40
Font Composite                  : False, False, False, False, False, False
Font File Name                  : arialbd.ttf, arial.ttf, AdobeSongStd-Light.otf, simsun.ttc, simhei.ttf, ARIALNB.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: AutoCAD Color 1
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 6.198200
Swatch Groups Colorants Magenta : 0.003100
Swatch Groups Colorants Yellow  : 96.514797
Swatch Groups Colorants Black   : 0.003100
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ADA4FUNVALUEL

Navigation menu