MOBOTIX BELLA RFID access control system User Manual Reg Notice Bell
MOBOTIX AG RFID access control system Reg Notice Bell
UserManual.wiki
>
MOBOTIX
>
BELLA User Manual
>
Reg_Notice_Bell
Contents
1.
Reg_Notice_Bell
2.
User manual Bell
Reg_Notice_Bell
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![The HiRes Video CompanyUSwww.mobotix.comHiRes Video InnovationsThe German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decentralized concept has made high-resolution video systems cost-ecient.MOBOTIX CORP • Manhattan (NY) • Phone: 888-MOBOTIX (662 6849) • us-sales@mobotix.com • Made in GermanyBellRFID: Regulatory NoticeFederal Communications Commission (FCC) and Industry Canada (IC) Notice for MX-Bell1-Core (M/N: Bell-A)(FCC ID: YYRBELLA, IC ID: 9357A-BELLA)NOTICE:This device complies with Part 15 of the FCC Rules [and with ICES-003 of Industry Canada]. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.NOTICE:Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deux conditions suivantes:(3) l‘appareil ne doit pas produire de brouillage, et(4) l‘utilisateur de l‘appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d‘en compromettre le fonctionnement.NOTICE:Changes or modifications made to this equipment not expressly approved by MOBOTIX AG may void the FCC authorization to operate this equipment.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Radiofrequency Radiation Exposure Information:The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.Ministry of Internal Aairs and Communications Notice for MX-Bell1-CoreNOTICE:• This device has been granted a designation number by Ministry of Internal Aairs and Communications• This device should not be modified (otherwise the granted designation number will be invalid)IP Video Door StationMX-Bell1-Core31.579_US_V1_07/2013MOBOTIX BellRFID MX-Bell1-Core (in IP Video Door Station triple frame white)RFID cards for keyless entry (1 admin card, 5 user cards)Available Bell Button Sets (Accessory)The Jones Family The Jones FamilyDr. Jones, MDCindy JonesThomas JonesDr. Jones, MDCindy JonesThomas JonesThe Jones FamilyDr. Jones, MDBell Button Module with RFID Technology for up to Five PartiesCindy JonesThomas JonesThe Jones FamilyDr. Jones, MDCaroline JonesCindy JonesThomas JonesThe Jones FamilyDr. Jones, MDThe Jones FamilyCindy JonesThomas JonesThe Jones FamilyDr. Jones, MDWeatherproof (IP65)–30 to +60°C/–22 to +140°F](https://usermanual.wiki/MOBOTIX/BELLA.Reg-Notice-Bell/User-Guide-2027402-Page-1.png)
