MODERN VISION TECHNOLOGY ELECTRONICS VM-01 Car mp3 transmitter User Manual VM 01 Manual

MODERN VISION TECHNOLOGY ELECTRONICS CO.,LIMITED Car mp3 transmitter VM 01 Manual

User Manual

MODERN VISION TECHNOLOGY ELECTRONICS CO.,LIMITED VM-01 User manual 1:Photo 2:Feature 1. Standard USB2.0, with high speed transmission. 2. Decode the music formats of MP3，WMA files. 3. Listen music with earphone. 4. Can transmit external audio sources (CD/MP3 player) through audio signal input jack. 5. Digital display with one key controls frequency adjustment that is more easy to switch between more than 190 frequency points 6.recollection function for the last song an the last CH. 7: the handle can be movable at any engel. 8. Power from Car lighter directly (DC12V), can be used in any car. 9. No need to change any device of car, plug and play. 3:Tech Specification Tech Parameter Data Information USB Version Supported USB2.0 Transmit Band FM Full Frequency points (about 200 channels) 88.1MHz—---107.9MHz Output Audio Frequency Response 20HZ-20KHZ Output Frequency SNR >90DB Output Distortion Rate <0.5% Power Supply DC12V Power Consumed <0.2W
MODERN VISION TECHNOLOGY ELECTRONICS CO.,LIMITED Working Temperature 0～60 Centigrade Keep Temperature -10～80 Centigrade 4.Manual 1: plug the player into the car lighter , Then press “CH” button to turn the launch frequency to an any one between 88.1 MHz to 107.9MHz, so digital display will show the frequency point. 2:Turn on your car audio equipment and switch it to FM, make sure the car stereo receiving frequency is the same as car mp3 transmitter. 3:please connect USB disc or mp3 that stores MP3 files with car mp3 transmitter, digital display will show the frequency point again several seconds later. Then car mp3 transmitter go into “playing” state automatically. 4:Press “playing” button and the digital display will show the frequency point and start to play at the same time. 5:Press“play/pause”button once for play /pause, continuously press for on/off 6:press“pre”button to play the pre file and digital display will show the song ordinal, continuous Press“NEXT” button to play the next file and digital display will show the song ordinal, coninuously press for volume down. 7:connect mp3 /CD audio sources with audio cable , plug one side into earphone jack, plug other side into other audio sources (such as mp3 , CD)output jack. Meantime, make sure car stereo receiving frequency is same as lauch frequency , no need USB, you can listen to music through car stereo . 8：you can change the handle in any angel as you wish, which helps to play car mp3. Warning FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu