MODNNET YM-09TX Wireless Microphone System User Manual
MODNNET CO., LTD. Wireless Microphone System Users Manual
MODNNET >
User Manual
Y
–
MIC
www.modnnet.co.kr
INNO-BIZ Certification •FCC •CE Certification •KCC Authentication.
Y
MIC
Wireless Microphone System
Transmitter (YM-09TX) Receiver (YM-09RX)
What is Y-MIC ?
The users of the wireless sound system require a
strong wireless microphone which guarantees the
reliability and stability. Y-Mic is a 2.4GHz wireless
microphone system which provides a variety of
microphone
system
which
provides
a
variety
of
features such as the excellent voice clarity, the
appearance design considering a style convenient
for the use of the various voice output capabilities.
Y-Mic is a 2.4GHz wireless microphone system
engrafted by the fast and easy installable and
interference-free wireless technology which
alwa
y
s
p
rovides the reliable
p
erformance. Y-Mic is
yp p
used in the schools, churches, exhibitions,
conferences, and seminar rooms, etc
Greetings
We deeply thank you for having purchased the product of MODNNET CO., LTD.
Our Modnnet Wireless Microphone realized a stable sound by adopting the high
Pro microphone with high cost-performance ratio and noise removal circuit.
And it applied the high sensitivity filter circuit to prevent interruption or
interference, and therefore the product is suitable for a wide range of applications
such as broadcasting, lectures, seminars, events, exhibitions, religious events, etc.
For the sufficient performance of the product, read this manual carefully before use
to understand fully about the features, performance, and operation and to use it correctly
CE notice to users:
Hereby, Modnnet Co., Ltd. declares that this models is in compliance with the essential
requirements and other relevant provisions of directive 1999/5/EC.
Contents
Safety precautions for use 3
1. Product overview & specifications 4
1.
Product
overview
&
specifications
4
2. Names and functions of each part 5
3. How to set the features 6
4H t t 7
4
.
H
ow
t
o opera
t
e
7
5. Displaying the Certification 8
6. Product warranty 9
Safety Precautions for Use
To prevent the failure or risk of the product and the damage of the property through the
correct use of the product
1. When you supply the power to this equipment, connect the given 12V 1.5A adapter. Using
other equipment to supply power to this equipment can cause the critical product damage.
2. User should not repair this equipment. Do not open the cover, or do not disassemble the
internal parts. Only skilled service personnel of MODNNET CO., LTD. or an employee of the
sales representative who has the knowledge about the electrical fire and electrical shock
hazard can repair the equipment .
3. Proper ventilation condition
Keep the proper ventilation condition to prevent product overheating .
4. Do not operate the product when its failure is suspected. .
When a problem occurs on this product, inquire the service center or the sales representative
of MODNNET CO., LTD. for service
5. The influx of materials or liquids
Do not use the product near water and keep it away from the moist air, water and dust.
Never insert any stuff into the equipment
(It may short circuit of the parts and may cause fire or electric shock .)
Not any kind of liquid should be poured over the equipment .
6. Places to avoid
The equipment typically work at -20 ˚C ~ +55 ˚C.
However
,
the followin
g
p
laces should be avoided in order to maintain the best
p
erformance
,gp p
of the product..
① Where the vibration is severe and humidity is high
② Where the equipment is exposed to the direct sunlight or the active gas
③ Do not use this equipment where gas exists or where there are phosphide or explosives
nearby
④ If you install the equipment at either high or unstable place, it can drop and cause the
human injury and its damage
human
injury
and
its
damage
.
7. Because this wireless equipment can have the potential interference of the electric wave,
any services related to the safety of life can not be provided .
01 Product Overview & Specifications
The outline of product
Y-Mic is a 2.4GHz wireless microphone system engrafted by the fast and easy installable
and interference-free wireless technology which always provides the reliable performance .
Product Specifications
Wireless receiver
(YM-09RX)
-LSEC (LED Status Extension Connector )
-Provide variable output ports.
-Solid plastic and steel structure
-High quality sound output
TM
Use frequency 2402MHz ~ 2480MHz
Audio frequency range 20 ~ 20,000Hz
THD+N 0.04%
S/N -92dB
Receive sensibility TYP -83dBm @ *FER<0.007%
Power 12V, DC
Operating temperature -20 ˚C ~ +50 ˚C
Size
228(W) X 44(H) X 128(D)
Size
228(W)
X
44(H)
X
128(D)
Weight 1.1Kg
Use frequency 2402MHz ~ 2480MHz
Transducer Condenser
Audio Frequency range 0.04%
RF output
10 78dBm
±
3dBm
-Internal high sensitivity microphone
-Provide external pin-type microphone
Wireless transmitter
(handheld/pin type. YM-09TX)
RF
output
10
.
78dBm
±
3dBm
Operating time 5Hours
Power 3.7V, 900mA
Operating temperature -20 ˚C ~ +50 ˚C
Size 45(W) X 86(H) X 20(D)
Weight 0.5Kg
-Paring mode by button
-Whenever can charge by cell-phone charger (Standard 24pin)
-Display Charging and capacity the battery by LED
-Display link condition by LED
02 Names and functions of each part
[ Receiver] ( YM-09RX)
LED Extension
Power Switch
Balanced
Output
DC 12V Unbalanced
Output Antenna
①
Power LED : checkin
g
the receiver’s o
p
eration status
LINK LED
Power LED
①
g
p
② LINK LED : checking the transmitter’s connection status
③ Power Switch or Power Push Button provided
④ DC 12V : input power
⑤ LED Extension : LSEC (LED Status Extension Connector )
⑥ Unbalanced Output : Balance & Unbalance output connection
⑦
Balanced Output : Balanced XLR Jack connection socket
TM
⑦
Balanced
Output
:
Balanced
XLR
Jack
connection
socket
⑧Antenna
[ Transmitter] ( YM-09RX)
① Pin Mic Jack : pin typed jack
② LINK LED : displaying the status of the connection between transmitter and receiver
③ Power LED : displaying the status of the product’s operation and battery
④ 24 Pin Connector : USB fittings of the cellular phone charger type
⑤ Volume Up/Down : volume up/down control
⑥Mute : mute function
⑦ Set Button : start Paring.
⑧ Mic : high-performance built-in condenser microphone
03 How to set the functions
1. Paring mode
▶ Press the SET button once and it finds the receiver.
The connect is linked and the LED of the transmitter and the receiver becomes
ON state. If the LED of transmitter and the receiver is not ON state,
press the SET button once again.
2. Volume Control
▶ Press Volume △ (Increase) / ▽ (decrease) button. Select the desired volume by
pressing the button .
You can select the volume control by 6-steps and the displayed value represents
the volume by percentage (%)
the
volume
by
percentage
(%)
The value set : 00 / 20 / 40 / 60 / 80 / 100
3. Power ON/OFF
▶Push u
p
and down the Power On/Off button .
4. How to use the charge cradle
p
When it is ON, the power is working. And when it is OFF, the power is shut down.
▶ You can charge the wireless microphone transmitter by using 24Pin USB
Connector and a regular cellular phone charger. Usually, charging is completed
within 1-2 hours and its completion can be confirmed through the color of LED on
the front part of the wireless microphone transmitter.
LED state : proper state (green) / middle state (yellow) / shortage state (red)
※ Please note that the excessive charging or impact may cause the damage.
04 How to operate
1 . AC power connection
▶ Connect the specified AC power cord to the AC input terminal of
the receiver .
2. DC power connection
▶ Connect the specified DC power cord to the DC input terminal of
th i
th
e rece
i
ver .
3. AUDIO output connection
▶ Connect the audio input and output properly to the audio system,
mixer and amplifier with the audio cable .
4. Turn on the receiver (Transmitter)
▶ Turn on the receiver (Transmitter) by pressing the power button .
※ Note: Before turning on the transmitter, set the volume of the
receiver, MIXER, AMP a minimum.
5. Synchronization between the transmitter and receiver
▶ However, the synchronization between the transmitter and receiver is
linked by giving a special ID to the transmitter, and therefore you
should press SET button to change or select it to use
[ Note ]
▶ Please note the following for better use of the performance of this
product .
1Wh th i l i h l t th th tt
1
.
Wh
en
y
ou use
th
e w
i
re
l
ess m
i
cro
ph
one c
l
ose
t
o
th
e mou
th
, se
t
t
o
lower the GAIN and on the reverse case, set to raise the GAIN.
2. Please turn off the power of the battery of the wireless microphone
when you do not use it for a long time .
05 Displaying the Certification
The entity who received the certification : Modnnet Co., Ltd.
The
name
of
equipment
(model)
:
Thenameofequipment(model)
The wireless device for wireless data communication system (YM-09TX)
Date of production : 20 . .
Manufacturer/Manufacturer’s country : MODNNET CO., LTD. / Korea
The entity who received the certification : MODNNET CO., LTD.
Thenameofequipment(model):
The
name
of
equipment
(model)
:
The wireless device for wireless data communication system (YM-09RX)
Date of production : 20 . .
Manufacturer/Manufacturer’s country : MODNNET CO., LTD. / Korea
※ This wireless equipment can have the radio interference during its operation
No service for the safet
y
of life is
p
rovided with this e
q
ui
p
ment.
FCC (Federal Communications Commission)
WARNING: This equipment may generate or use radio frequency energy. Changes or odifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
This device complies with Part 15 of the FCC
`
s Rules Operation is subject to the following two Conditions:
This
device
complies
with
Part
15
of
the
FCC s
Rules
.
Operation
is
subject
to
the
following
two
Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may cause
undesirable operation.
Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in aid ti l i t ll residential installation.
This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-
Connect
the
equipment
into
an
outlet
on
a
circuit
different
from
that
to
which
the
receiver
is
connected
.
- Consult the dealer or an experienced radio/TV technician for help.
CE notice to users:
Hereby, MODNNET CO., LTD. declares that this models is in compliance with the essential
requirements and other relevant provisions of directive 1999/5/EC.
Product Warranty
Modnnet Co., Ltd. guarantees this product with the contents listed below.
Product Y-Mic Product No.
Data of purchase Warranty Period 1 year
Purchaser
Name
Tel No.
Address
Address
Warranty Repair Information
The product is guaranteed as follows .
1. This product is manufactured through the strict quality control .
If a failure occurs due to the manufacturing defects, such failure will be repaired as free
of charge at a Modnnet A/S center within 1 year from the date of purchase .
2. If a failure occurs after the end of warranty period, the repair for such failure should be
paid.
3. As for the following cases, the repair should be paid even during the warranty period .
1) Failure due to the user's mishandling
2) Failure in moving and transportation after installation of the product
2)
Failure
in
moving
and
transportation
after
installation
of
the
product
3) In case that the product is damaged or its content is altered because others than
the staffs of Modnnet A/S centers.
4) Failure or damage caused by the natural disasters such as fire and flood.
If any due clauses are omitted in each column of this warranty or the warranty is lost
free repair service is not provided Therefore please check it with the placewhereyou
free
repair
service
is
not
provided
.
Therefore
,
please
check
it
with
the
place
where
you
.
※ purchase the product and keep the warranty safely .
www.modnnet.co.kr
Room 206, E&C INNOBIZ TOWER, # 1320-2, Shindang-dong, Dalseo-gu,
Daegu Metropolitan City(704-919), Korea
Tel. 053-600-8777, Fax. 053-600-8778, A/S Center. 1588-7945