User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3295078 |
| Application ID | mDdg6qTboYV8Zkpox8MiRg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 496.49kB (6206082 bits) |
| Date Submitted | 2017-02-24 00:00:00 |
| Date Available | 2017-02-24 00:00:00 |
| Creation Date | 2017-02-02 16:02:48 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2017-02-08 15:33:59 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Windows) |
ENGLISH CAR MULTIMEDIA SYSTEM USER’S MANUAL CRETA Please read this manual carefully before operating your set and retain it for future reference. Designs and specifications are subject to change without prior notice. The screens shown in this manual may differ from the actual screens of the product. The design and specification of this product may change without prior notification for product improvement. When transferring the vehicle to another individual, include this user’s manual so that the next driver can continue its use. Rev.2.0 iPod® iPod® is a registered trademark of Apple Inc. Bluetooth® The Bluetooth Wireless Technology word mark and logos are registered trademarks owned by Bluetooth Wireless Technology SIG, Inc. DOLBY Manufactured under license from Dolby Laboratories “Dolby” and the double-D symbol are trademarks of Dolby Laboratories Cortex Cortex is the name of the ARM Processor Architecture used in the AV System. Windows Embedded Compact 7 Windows Embedded Compact 7 is an operating system used in the AV System. Precautions for safety Component Names and Functions Saving Radio Frequency........................ 15 Saving Manually............................. 15 Using Preset Menu........................... 15 Scan........................................... 15 Scanning Radio Frequency .................. 15 Scanning Preset frequency................... 15 Sound settings................................. 15 Head Unit....................................... 9 Steering Wheel................................. 11 USB Safety notes..................................... 6 Key Product Features Key Product Features............................ 8 Using the System for the First Time Turning the System On/Off..................... 12 Turning the System ON...................... 12 Turning the System Off....................... 12 AV ON/OFF.................................. 12 Resetting the System........................... 12 FM/AM Basic Screen.................................... 13 Listening to FM/AM radio....................... 14 Auto tuning................................. 14 Manual tuning............................... 14 Selecting Presets............................. 14 Selecting Lists............................... 14 About USB..................................... 16 USB Music Playing USB Music ............................. 17 Searching USB Music Files.................... 17 Repeat...................................... 17 Shuffle...................................... 17 Scan All..................................... 17 Scan Folder.................................. 17 Album Cover view.............................. 18 List............................................ 18 Sound settings................................. 18 ENGLISH Table of Contents USB Video Playing USB Video.............................. 19 Searching USB Video Files.................... 19 Repeat...................................... 19 Shuffle...................................... 19 List............................................ 20 Caption........................................ 20 Display settings. ............................... 20 Sound settings................................. 20 USB Photo Viewing USB Photo ............................ 21 Switching to menu screen or full screen ...... 21 Searching USB Image Files................... 21 Rotating / Slide show ........................ 21 Using the Menu Buttons........................ 22 Slideshow interval........................... 22 Display settings.............................. 22 iPod Music About iPod. ................................... 23 Supported iPod devices ..................... 23 Playing iPod Music ............................. 24 Searching iPod Music Files. .................. 24 Table of Contents Using the Menu Buttons........................ 24 Setting audiobook playback speed........... 24 Sound settings................................. 24 Bluetooth® Wireless Technology AUX Before Using the Bluetooth Handsfree........... 28 What is Bluetooth® Wireless Technology?..... 28 Precautions for Safe Driving.................. 28 Cautions upon Connecting Bluetooth Phone . 28 Playing an AUX source.......................... 25 Using the Menu Buttons........................ 25 Bluetooth Connection Bluetooth Audio Before playing the Bluetooth audio.............. 26 Searching Bluetooth audio Files................. 26 Searching USB Music Files.................... 26 Using the Menu Buttons........................ 26 Getting started with navigation Precautions for safe driving....................... 27 What is GNSS?.................................. 27 About satellite signals........................... 27 Acquiring satellite signals....................... 27 (Refer to the separate navigation manual for more detailed operation) When no Phones Have Been Paired............. 29 Pairing from the Bluetooth® Device........... 29 Pairing from the car.......................... 29 When a Phone is Already Paired................. 30 When your phone is connected................. 30 Bluetooth Phone Making/Answering Calls........................ 31 Calling by Dialing a Number.................. 31 Making a Call from Speed Dial................ 31 Calling through Redial....................... 31 Answering a Call............................. 31 Rejecting a Call.............................. 31 Operating Menus during a Call.................. 32 Ending a Call................................ 32 Switching Call to Bluetooth® Phone........... 32 Making 3 way call............................ 32 Using the Menu Buttons........................ 33 Contacts....................................... 33 Updating Mobile Phone Contacts............ 33 Making a call from contacts. ................. 33 Searching for contacts....................... 33 Calling list...................................... 34 Viewing Calling lists.......................... 34 Favourites...................................... 34 Calling Favourites............................ 34 Saving to Favourite.......................... 34 Deleting Favourites.......................... 35 Changing the Favourites name............... 35 Bluetooth settings.............................. 35 Setup Starting mode.................................. 36 Sound......................................... 36 Sound Balance.............................. 36 Variable EQ.................................. 36 Volume setting.............................. 36 Beep........................................ 37 Display......................................... 37 Brightness................................... 37 Dimming mode............................. 38 ENGLISH Table of Contents Bluetooth settings.............................. 38 Bluetooth connection........................ 38 Ringtone.................................... 39 Change passkey............................. 39 Changing device name......................... 39 Auto Connection............................ 40 System........................................ 40 Language................................... 40 Keyboard................................... 40 Standby screen.............................. 41 Factory settings.............................. 41 Specification USB MP3 Specification.......................... 42 Video and Image Specification.................. 42 Before thinking there is a product defect Before thinking there is a product defect......... 43 Trouble shooting Trouble shooting............................... 44 Precautions for safety Safety notes CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations. To promote safety, certain functions are disabled unless the hand brake is on. When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside. To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. Do not drop it and avoid heavy impacts at anytime. WARNING: ••Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents. ••Do not disassemble, assemble, or modify the navigation system. Such acts could result in accidents, fire, or electric shock. ••Using phone features while driving may distract drivers from paying attention to traffic conditions and result in traffic accidents. Use phone features only after the vehicle has been parked. ••Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction. ••Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents (fires, electric shock) or product malfunctions. ••Do not touch the antenna during thunder or lightening as such acts may lead to lightning induced electric shock. ••Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents. ••The video screen will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen. ••Some Non-video features may also not operate when the vehicle is in motion. These features will operate only when the vehicle has been parked. ENGLISH Precautions for safety CAUTION: •• Do not keep the navigation system running •• •• •• •• with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running. When the driver wants to operate navigation system, first park the vehicle in a safe location and set the parking brake. Operating the system while driving can distract the driver and may result in a serious accident. Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electrical shock. Some states/provinces may have laws limiting the use of video screens while driving. Use the system only where it is legal to do so. Do not use your phone in private mode when you are driving. You must stop at a safe location to use it. Key Product Features Key Product Features Name Display Radio Multimedia Player Description Wide TFT-LCD Display Provides high quality video through a Wide TFT-LCD Display using an LED Back Light. Digital Tuner Feature Digital Tuner using PPL method that supports memory of 20 broadcast stations for each AM and FM modes. Radio broadcast station name Displays broadcast station names for key locations. Support for various Media Formats Support for various media formats, including Radio, MP3, USB, iPod, AUX and Bluetooth® Audio Streaming modes. Bluetooth® Wireless Technology Convenient use of Bluetooth® Handsfree by using buttons within the steering wheel remote controller. Miscellaneous Digital Screen Control Features Easy control of features through touch screen options. Steering Wheel Remote Controller Control over audio features and Bluetooth® through the steering wheel remote controller for maximum convenience. ENGLISH Component Names and Functions Head Unit Name Description RADIO ••Operates FM/AM mode. ••Each time the key is pressed, mode is changed in order of FM ▶ AM ▶ FM. ••Operates available media (USB, iPod, Bluetooth Audio, MEDIA AUX). ••If the media is not connected, corresponding modes will be disabled. When the keys are pressed shortly. ••In FM/AM mode, searches broadcast frequencies. ••In Media modes, changes the track, file or chapter. When the keys are pressed and held. ••FM/AM mode : automatically searches broadcast frequencies and channels. Once released, searches and begins playing the next broadcast frequency. ••Media modes: rewinds or fast forwards the track or file (except AUX). ••Power on 5 Power / Volume Knob When power is off, press to turn power on. ••Power off When power is on, press and hold to turn power off. ••Audio off When power is on, press to turn Audio off. ••Turn left/right to control volume. 6 Reset Resets the system. Component Names and Functions Head Unit 10 Description MAP Press to display the map screen of the current location when in a different mode. PHONE Takes user to phone screen. ••Turns off the screen. ••Displays the Setup mode. Name 9 Tune / ENTER Knob •• FM/AM mode : changes the frequency. •• MEDIA (USB/iPod) mode : changes the track, file or title (except AUX). ENGLISH Component Names and Functions Steering Wheel Name MUTE Description Mutes the sound. ••Operates FM ▶ AM ▶ Available Media (USB Music/USB Video/iPod/Bluetooth Audio/AUX). Name 1 + VOL - 2 ∧ ∨ When pressed shortly. ••When pressed in the phone screen, displays the last call. ••When pressed in the dial screen, makes a call. ••When pressed in the incoming call screen, answers the call. ••When pressed during single call, switches call back to mobile phone (Private). ••When pressed during 3way call, swap call. ••When pressed twice, redials the last call. When pressed and held. ••When pressed during a Bluetooth® Handsfree call, switches call back to mobile phone (Private). ••When pressed while calling on the mobile phone, switches call back to Bluetooth® Handsfree (Operates only when Bluetooth® Handsfree is connected). ••When pressed, redials the last call. •• When pressed during a call, ends the phone call. •• When pressed in the incoming call screen, rejects the call. Description Controls the volume. When keys are pressed shortly. ••FM/AM mode: scans and receives the previous/next frequency. ••Media mode: changes the track, file or chapter. When keys are pressed and held. ••In FM/AM mode: changes frequencies while pressed. Upon release, scans and receives the next frequency. ••Media mode: rewinds or fast forwards the track or file. be disabled. ••Press and hold the key to turn the Audio system on/off. ••When power is off, press the key to turn power back on. MODE ••If the media is not connected, corresponding modes will 11 Using the System for the First Time Turning the System On/Off Resetting the System Turning the System ON This feature is used to reset the system in the occurrence of an unforeseen error or problem. Press the engine start button. If the brakes are not pressed, then the ACC and system will turn on. If the brakes are pressed, then the IGN and system will turn on and the ignition will start. In both instances, the following safety warning will be displayed. Turning the System Off Press the engine start button again or press and hold the power key on the head unit to turn the system off. NOTE • If the system is turned off while the Handsfree is being used, then the call will automatically switch back to the mobile phone. Pressing the PWR key on the head unit will display the safety warning page. Press the Agree button to display the most recent mode. AV ON/OFF Press the PWR key on the head unit when the AV is on. Press the PWR key or press the menu key to turn on AV. While AV is turned off, the key and the TUNE / ENTER knob will be disabled. 12 Press and hold the RESET key for about 1 second. (The use of a clip or pin is recommended when resetting the system.) ENGLISH FM/AM Basic Screen Name 11 10 1 Mode tap Press the tab to change between FM and AM mode. 2 Preset button Displays the Preset List. 3 List button Displays automatically updated lists. 4 Menu button Displays List, Preset, Scan, Preset scan and Sound settings menus. 5 Frequency Displays the current frequency. 6 Preset No. Displays the current preset number. 7 Seek down Single tap: seek down. Long tap: fast seek down. 8 Tune down Single tap : tune down. Long tap: tune down until the button is released and plays the current frequency. 9 Tune up Single tap : tune up. Long tap: tune up until the button is released and plays the current frequency. 10 Tune down Single tap: seek up. Long tap: fast seek up. 11 Frequency bar Use the tap to move to the desired frequency. 12 List Displays automatically updated lists. 13 Preset Displays saved presets for user selection. 14 Scan Plays frequencies with superior reception for 3 seconds each. 15 Preset Scan Plays frequencies saved to presets for 3 seconds and moves to the next saved frequency. 16 Sound settings Sets sound related settings. 12 13 14 15 16 Description 13 FM/AM Listening to FM/AM radio Selecting Presets Selecting Lists Press the FM/AM key to change the mode in order of FM ▶ AM ▶ FM. Press the MENU button ▶ Press the Preset button. From the presets, select the frequency you want to listen to. Press the MENU button ▶ Press the List button. From the lists, select the frequency you want to listen to. FM lists are automatically updated. AM lists are manually updated by pressing ( Auto tuning Press the key or press the l<< >>l button to automatically search for frequencies. Manual tuning Press the TUNE / ENTER knob or press the << >> button to manually select the frequency. The stations move up and down step by step. Press the frequency bar to search for frequencies that you want. 14 ). ENGLISH FM/AM Saving Radio Frequency Name Saving Manually After selecting frequency ▶ Press the ton ▶ Press the + Add to Preset . but- Description 1 Tune listens to frequency selected. 2 Save overwrites frequency listening to currently. 3 Delete deletes frequency. Starting from the current frequency, frequencies with superior reception are scanned for 3 seconds and the previous frequency is restored. Scanning Preset frequency Press the Using Preset Menu NOTE Press and hold the preset list you want to edit. • Press the ▶ Press the button ▶ Press the Delete all MENU button to delete entire presets. Plays frequencies saved to presets for 3 seconds and moves to the next saved frequency. NOTE • When the scan is operating, pressing the controller will stop the function and return to the stopped station. Scan Sound settings Scanning Radio Frequency Press the button ▶ Press the MENU Preset Scan MENU button ▶ Press the Scan Press the MENU Sound settings button ▶ Press the For details, refer to the “Sound” on the page 36. 15 USB About USB Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on. •• Files that are not standard format files will not be played. •• For MP3/WMA files, only music files with compression rates between 8 Kbps ~ 320 Kbps can be played. •• Heed caution to static electricity when connecting/disconnecting external USB devices. •• Encoded MP3 Players will not be recognized when connected as an external device. •• When connecting an external USB device, the device may not properly recognize the USB is in some states. •• Only USB devices formatted as FAT 12/16/32 are supported, and NTFS file system is not supported. •• Some USB devices may not be supported due to compatibility issues. •• Avoid contact between the USB connector with bodily parts/foreign objects. 16 •• Repeated connecting/disconnecting of USB •• The device may not support normal opera- devices within short periods of time may result in product malfunction. Insert USB device after starting the car. If the car is started while USB device is inserted, it may damage USB device. The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB. Such differences in required time are not indications of malfunction. The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly with the multimedia terminal of the vehicle. When application programs are installed to specific USBs, files may not properly play. The device may not operate normally if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device. Charging through the USB may not work for some mobile devices. tion when using a USB memory type besides Metal Cover Type USB Memory. •• The device may not support normal operation when using formats such as HDD Type, CF, or SD Memory. •• The device will not support files locked by DRM (Digital Rights Management). •• USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized. •• •• •• •• •• •• ENGLISH USB Music Playing USB Music Searching USB Music Files Repeat Once a USB is connected, USB Music mode will operate automatically. Press the MEDIA key ▶ Press the USB Music button▶ Press the Play button to play USB music. While playing ▶ Press the key or the l<< >>l button to play the previous/next file. Press the button. Each time the button is pressed, the option is changed from Repeat Folder( ) ▶ Repeat One( ) ▶Off(Repeat All( )). •• Pressing and holding the key or the button will rewind or fast forward the current file. >>l •• While the key or the l<< button is being pressed, the track will rewind or fast-forward at high speeds. Once the key is released, the USB Music will begin playing at normal speed. l<< >>l NOTE • Press the TUNE / ENTER knob allows you to select the previous/next file. This key will not rewind or fast-forward the file. Shuffle Press the button. Each time the button is pressed, the option is changed from Shuffle All( ) ▶ Shuffle Folder ) ▶ Off( ). Scan All Press the MENU button ▶ Press the Options ▶ Press the Scan All to scan files within the USB in random order. Scan Folder Press the MENU button ▶ Press the Options ▶ Press the Scan Folder to search files within the current folder. NOTE • If the USB is not connected, or there is no media file in USB then the USB media button will be disabled. 17 USB Music Album Cover view Press the button ▶ Press the to search desired album. List < > button Press the MENU button ▶ Press the ton to display USB Music list screen. Sound settings List but- Press the MENU button ▶ Press the ▶ Press the Sound settings . Options For details, refer to the “Sound” on the page 36. It is possible to search by Folder, Song, Album and Artist. 18 Playing USB Video Searching USB Video Files Once a USB is connected, USB Video mode will operate automatically. Press the MEDIA key ▶ Press USB Video button ▶ Press the Play button to play USB Video. While playing ▶ Press the key or >>l button to play the previous/next file. Repeat l<< •• Pressing and holding the key or button will rewind or fast forward the current file. >>l but•• While the key or l<< ton is being pressed, the track will rewind or fast-forward at high speeds. Once the key is released, the USB Video will begin playing at normal speed. l<< ENGLISH USB Video Press the button. Each time the button is pressed, the option is changed from Repeat Folder( ) ▶ Repeat One( ) ▶Off(Repeat All( )). >>l Shuffle Press the button. Each time the button is pressed, the option is changed from Shuffle All( ) ▶ Shuffle Folder ) ▶ Off( ). NOTE • Press the TUNE / ENTER knob allows you to select the previous/next file. This key will not rewind or fastforward the file. NOTE • If the USB is not connected, or there is no media file in USB then the USB media button will be disabled. 19 USB Video List Press the MENU button ▶ Press the ton to display USB Video list screen. List but- Display settings Sound settings Press the MENU button ▶ Press the Display settings . Press the MENU button ▶ Press the Sound settings . For details, refer to the “Sound” on the page 36. NOTE • USB Video is not available while driving. (Because of traffic regulations, videos is only available when your vehicle is parked.) It is possible to search by Folder and Videos. Press the Caption Press the button to set “Brightness” and “Dimming mode”. For details, refer to the “Display” on the page 37. Press the MENU button ▶ Press the Caption button to display caption on USB Video screen. 20 Reset button to initialize the settings. Viewing USB Photo Press the MEDIA key ▶ Press USB Photo button ▶ Press the desired photo in List screen. Switching to menu screen or full screen Press the photo to view with full screen. Press the photo once more to return to the menu screen. ENGLISH USB Photo Searching USB Image Files Press the l<< >>l button or turn the TUNE / ENTER knob to view the previous/next image. Press to view the list of USB photos. Rotating / Slide show Press the Press the buttons to rotate image. button to view slide show. NOTE • Press NOTE • If the USB is not connected, or there is no media file in USB then the USB media button will be disabled. to move to the previous screen. NOTE • In full screen, images can be zoomed in/out by up to 300%. • Press to move to the List screen. 21 USB Photo Using the Menu Buttons Slideshow interval Display settings Press the MENU button to set Slide show, Slide time and Display settings menus. Press the Press the Slide time button ▶ Press the button. MENU MENU Display settings button ▶ Press the button. For details, refer to the “Display” on the page 37. Slide show intervals can be set at 10 sec , 20 sec , or 30 sec intervals. 5 sec NOTE • Slideshow is not available while driving. (Because of traffic regulations, image is only available when your vehicle is parked.) 22 ENGLISH iPod Music About iPod iPod® is a registered trademark of Apple Inc. •• Some iPods with unsupported communication protocols may not properly operate with the system. •• If the iPod malfunctions due to an iPod device defect, reset the iPod and try again. (To learn more, refer to your iPod manual.) •• During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/iPhone product.) will charge the iPod through the system. •• The use of genuine iPod cables supplied by Apple is recommended. (The use of other products may result in noise or abnormal operation.) •• Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again. •• Use iPod with complete synchronization to iTunes. Unauthorized song addition may cause abnormal operation. •• If iPod and Bluetooth are connected simultaneously with the same iPhone, you cannot use Bluetooth audio function. •• If iPod touch or iPhone is used, iOS4.2 or a later version is recommended. 23 iPod Music Playing iPod Music Searching iPod Music Files Setting audiobook playback speed Once a iPod is connected, iPod Music mode will operate automatically. You can play the previous or next file. For details, refer to the page 17. Press the Using the Menu Buttons Setting the playback speed only affects audio books purchased from the iTunes store or audible.com. For details about iPod, refer to the iPod User Guide. MEDIA key ▶ Press iPod Music button. Press the menus. MENU button to set List and options Press the Press the MENU button ▶ Press the options ▶ options ▶ Audiobook •• Press the ▶ button to play files saved within the iPod device. •• Press the ll button to pause the file. NOTE • If the iPod is not connected, or there is no media file in iPod then the iPod Music button will be disabled. For details, refer to the “List” on the page 18. Sound settings Press the Press the MENU button ▶ Press the Sound settings For details, refer to the “Sound” on the page 36. 24 Playing an AUX source Using the Menu Buttons If an external device connector is connected with the AUX terminal, then AUX mode will automatically operate. Press the MENU ENGLISH AUX button to set Sound. Press the MEDIA key ▶ Press the AUX button to play auxiliary device while a different source is playing. For details, refer to the “Sound” on the page 36. 25 Bluetooth Audio Before playing the Bluetooth audio •• Music saved in the mobile phone can be played Playing Bluetooth audio Press the button. Media key ▶ Press the Bluetooth Audio in the car through Bluetooth audio streaming. Using the Menu Buttons Press the MENU button to set List and Sound settings menus. •• Bluetooth audio can be played only when a Bluetooth phone or Bluetooth audio device has been connected. To play Bluetooth audio, connect the Bluetooth phone to the car system. For more information on connecting Bluetooth, please refer to the user’s manual [Pairing and connecting the unit and a Bluetooth phone] on page 29. •• If Bluetooth is disconnected while playing Bluetooth audio, the audio stream will be interrupted. •• The audio streaming function may not be supported in some mobile phones. Only one function can be used at a time, either the Bluetooth handsfree or the Bluetooth audio function. For example, if you convert to the Bluetooth handsfree while playing Bluetooth audio, the music stream is interrupted. •• Playing music from the car is not possible when there are no music files saved in the mobile phone. 26 •• Press the ▶ button to play files saved within the Bluetooth® phone. •• Press the ll button to pause the file. Searching Bluetooth audio Files You can play the previous or next file. For details, refer to the page 17. NOTE • The title/artist info may not be supported in some mobile phones. When it is not supported, only the symbol will be displayed. • The play/pause feature may operate differently depending on the mobile phone. For details, refer to the “Sound” on the page 36. Precautions for safe driving Please observe and comply with local traffic rules and regulations. •• For your safety, some features cannot be operated while driving. Features that cannot be operated will be disabled. •• The route displayed for destination guidance is a reference and the route guidance will take you to the vicinity of your destination. The highlighted route is not always the shortest distance, the least congested, and in some cases might, not be the fastest route. •• Road, name, and POI information may not always been completely updated. It might happen that road names and POI information is not up to date. •• The car position mark does not always indicate your exact location. This system uses GNSS information, various sensors, and road map data to display the current position. However, errors in displaying your location may occur if the satellite is transmitting inaccurate signals or two or less satellite signals can be received. Errors that occur in such conditions cannot be corrected. •• The position of the vehicle within the navigation may differ from your actual location depending on various reasons, including the satellite trans- mission state, vehicle state (driving location and conditions), etc. Additionally, the car position mark may differ from the actual position if the map data is different from the actual road landscape, such as changes due to the construction of new roads. If such differences occur, driving for a short period of time will automatically correct the position of the vehicle through map matching or GNSS information. ENGLISH Getting started with navigation Acquiring satellite signals Before the unit can determine your current position and navigate a route, you must do the following steps: 1. Go outside to an area free from tall obstructions. 2. Turn on the unit. Acquiring satellite signals can take a few minutes. What is GNSS? The GNSS(Global Navigation Satellite System) is a satellite-based navigation system made up of a network of 32 satellites placed into orbit by the Global Positioning System (GPS) of U.S.A, GLONASS of RUSSIA, etc. GNSS works in any weather conditions, anywhere in the world, 24 hours a day. There are no subscription fees or setup charges to use GNSS. About satellite signals Your unit must acquire satellite signals to operate. If you are indoors, near tall buildings or trees or in a parking garage, the unit cannot acquire satellite signals. 27 Bluetooth® Wireless Technology Before Using the Bluetooth Handsfree What is Bluetooth® Wireless Technology? •• Bluetooth® Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz frequency to connect various devices within a certain distance. •• Supported within PCs, external devices, Bluetooth® phones, PDAs, various electronic devices, and automotive environments, Bluetooth® Wireless Technology to be transmitted at high speeds without having to use a connector cable. •• Bluetooth® Handsfree refers to a device which allows the user to conveniently make phone calls with Bluetooth® mobile phones through the Multimedia system. •• The Bluetooth® Handsfree feature may not be supported in some mobile phones. 28 Precautions for Safe Driving •• Bluetooth® Handsfree is a feature that enables drivers to practice safe driving. Connecting the head unit with a Bluetooth® phone allows the user to conveniently make calls, receive calls, and manage the phone book. Before using Bluetooth ® Wireless Technology, carefully read the contents of this user’s manual. •• Excessive use or operations while driving may lead to negligent driving practices and be the cause of accidents. Do not operate the device excessively while driving. •• Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driving, view the screen only for short periods of time. Cautions upon Connecting Bluetooth Phone •• Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth® features. •• If you do not want automatic connection with your Bluetooth® device, turn the Bluetooth® feature off of the Bluetooth® device. •• Park the vehicle when connecting the head unit with the mobile phone. •• Some Bluetooth features may occasionally not operate properly depending on the firmware version of your mobile phone. If such features can be operated after receiving a S/W upgrade from your mobile phone manufacturer, unpair all devices and pair again before use. When no Phones Have Been Paired Press the press the PHONE key on the steering wheel or key ▶ Press the OK . Pairing from the Bluetooth® Device Pairing from the car Press the Press the button ▶ Press the Search from device . MENU ENGLISH Bluetooth Connection button ▶ Press the ▶ Press the phone name to pair ▶ Press the YES . MENU Search from car From the Bluetooth® device, search for the car name and pair the device. When searching from the Bluetooth® device, the car name is CRETA and the default passkey is ‘0000’. 29 Bluetooth Connection When a Phone is Already Paired Press the key on the steering wheel or press the PHONE key ▶ Press the OK ▶ Press the phone name to pair ▶ Press the YES . NOTE • When a Bluetooth device is connected, a new device cannot be paired. If you want to pair a new phone, first disconnect the connected Bluetooth device. 30 When your phone is connected Press the key on the steering wheel or press the PHONE key on the head unit to display the following screen. NOTE • Once Bluetooth connection is successful, the name of the connected mobile phone will be displayed on the phone screen and Bluetooth handsfree functions will be ready to be operated. • Some functions may not be supported due to limited Bluetooth compatibility between the car system and mobile phone. Making/Answering Calls Making a Call from Speed Dial Answering a Call Calling by Dialing a Number Enter the 1 or 2 digit speed dial number with the Dial Pad ▶ Press and hold the last number. Incoming call notice ▶ Press the button or the key on the steering wheel. Enter number on the Dial Pad ▶ Press the button or the key on the steering wheel. ENGLISH Bluetooth Phone Calling through Redial Press and hold the button or Press the key on the steering wheel twice. NOTE • Redialing is not possible when there is no dialed calls list. NOTE • If you press the wrong number, press to delete one digit of the entered number. Press and hold the dial pad 0 + to enter a "+". • Press the button to search phone numbers. For detail, refer to the “Searching for contacts “ on the page 33. Rejecting a Call Incoming call notice ▶ Press the button or the key on the steering wheel. 31 Bluetooth Phone Operating Menus during a Call Ending a Call Making 3 way call While on a call ▶ Press the button or the key on the steering wheel. While on a call ▶ Press the button. ▶ Press phone number you want to make a call ▶ Press the button. Switching Call to Bluetooth® Phone During handsfree call ▶ Press the button or press and hold the key on the steering wheel. Name 32 Description Ends a call. Turns the Mic On/Off. Switches a voice call from the car handsfree to the mobile phone. Display dial pad screen for entering ARS numbers. 3 Way call. During call on mobile phone ▶ Press the button or press and hold the key on the steering wheel. ENGLISH Bluetooth Phone Using the Menu Buttons Contacts Making a call from contacts In Phone screen ▶ Press the MENU button to use Contacts , Calling list , Favorites , Bluetooth settings. Updating Mobile Phone Contacts In Contacts screen ▶ Press the contact you want to call. Up to 5,000 mobile phone contacts can be updated. In Contacts screen ▶ Press the ▶ Press the Update . MENU button Searching for contacts In Contacts screen ▶ Press the MENU button ▶ Press the Search ▶ Enter the name ▶ Press the OK ▶ Press the contact you want to call. The contacts are deleted and the contacts of the connected phone is updated. 33 Bluetooth Phone Calling list Favourites Viewing Calling lists In Contacts screen or Calling list screen ▶ Press and hold the contact you want to save ▶ Press the Save to Favourites . Calling Favourites In Phone screen ▶ Press the Press the Calling lists . MENU button ▶ In Phone screen ▶ Press the MENU button ▶ Press the Favourites ▶ Press the Favourite you want to call. Press the MENU Name button on Calling list screen. Description 1 All Displays all calling list. 2 Missed Displays the missed calling list. 3 Received Displays the incoming calling list. 4 Dialed Displays the outgoing calling list. NOTE • The calling list may not be saved in some mobile phones. 34 Saving to Favourite In Phone screen ▶ Press the button. Add to favourites Deleting Favourites In Favourites screen ▶ Press the Press the Delete all ▶ Press the button ▶ MENU OK In Favourites screen ▶ Press and hold the favourite you want to delete ▶Press the Delete ▶ Press the OK . Changing the Favourites name Bluetooth settings In Favourites screen ▶ Press and hold the favourite you want to change ▶ Press the Rename ▶ Enter the name ▶ Press the OK . In Phone screen ▶ Press the Press the Bluetooth settings . ENGLISH Bluetooth Phone MENU button ▶ For details, refer to the “Bluetooth” on the page 38. 35 Setup Starting mode Sound Balance Volume setting Press the screen. In Sound settings screen ▶ Press the Sound Balance ▶ Set the desired sound balance. In Sound settings screen ▶ Press the Volume setting ▶ Set the desired volume. key to display the Setup Sound This menu is used to adjust the sound effects for the whole system. Press the key ▶ Press the Sound button. Use the ▲ , ▼ , , and buttons to adjust settings. Press the Reset to restore sound to the center position. Variable EQ In Sound settings screen ▶ Press the Variable EQ ▶ Set the desired mode. Name Description 1 Phone Controls the volume related to phone. 2 Start up Controls the audio volume when starting the system. Use the ▲ , ▼ and buttons to adjust settings. Press the Reset to initialize the settings. 36 Beep Display Brightness This menu allows you to play a beep sound whenever you operate the touch screen. This menu allows you to adjust the brightness and set the dimming mode for the whole system. Press the key ▶ Press the Display . In Display settings screen ▶ Press the Brightness ▶ Set the desired brightness. In Sound settings screen ▶ Press the turn on/off. Beep to ENGLISH Setup Use the ▲ , ▼ and buttons to adjust settings. Press the Reset to initialize the settings. 37 Setup Dimming mode Bluetooth settings Bluetooth connection This menu allows you to set the brightness according to mode changes. This menu allow you to set Bluetooth settings. Press the key ▶ Press the Bluetooth . This menu allow you to manage the Bluetooth device list, such as pairing, connecting or deleting Bluetooth devices. In Display settings screen ▶ Press the Dimming mode ▶ Set the desired mode. In Bluetooth settings screen ▶ Press the Bluetooth connection ▶ Set the desired settings. Name Description 1 Auto After selection of auto mode, two conditions arise. 1. Headlight on → Night mode 2. Headlight off → Day mode 2 Day Brightness level always set on high. 3 Night Brightness level always set on low. Press and hold the phone name to disconnect/ delete the device. 38 ENGLISH Setup Ringtone Change passkey Changing device name The configured ringtone is played through the vehicle speakers when you receive a call. This feature allows you to change the passkey used for Bluetooth device authentication. In Bluetooth settings screen ▶ Press the Change device name ▶ Enter the name. In Bluetooth settings screen ▶ Press the Ringtone ▶ Set the desired ringtone. In Bluetooth settings screen ▶ Press the Change passkey ▶ Enter the passkey. NOTE • The default device name is CRETA . NOTE • The default passkey is 0000. 39 Setup Auto Connection System The Bluetooth® device will automatically be connected according to the option set when the car ignition is turned on. Press the Keyboard key ▶ Press the System button. In System settings screen ▶ Press the Press the desired language. In Bluetooth settings screen ▶ Press the Auto Connection to turn on/off. Language This menu allows you to set the language of the system. In System settings screen ▶ Press the Language ▶ Press the desired language. 40 This option allows you to change the type of keyboard used within the system. Keyboard ▶ Standby screen Factory settings In System settings screen ▶ Press the Standby screen to turns on/off the screen displayed when the system power is turned off. This menu allows you to reset settings specified by the user. ENGLISH Setup In System settings screen ▶ Press the Factory settings ▶ Press the desired item ▶ Press the ▶ Press the YES . 41 Specification USB MP3 Specification Category MP3 File Specification Recommended Bitrate and Sampling Frequency ID3 TAG Video and Image Specification Description Response Specification: MPEG1 AUDIO LAYER3 Response Sampling Frequency : 32, 44.1, 48 (KHz) Response Bitrate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192 ,224 ,256 ,320 (Kbps) ID3 v1.1 and ID3 v2.x TAG •• Max Directory Layers: 15 layers •• Max length of folder names and file names: 255Bytes Detailed Specification •• Characters supported for folder/file names: English and numbers •• Max number of files recognized from one USB device: 5000 Category Description File Format AVI(DivX), MPEG Image Format jpg, gif, bmp, png Extensions avi, divx, mpg, mpeg, mp4, wmv Supported Image Resolution Max 4000x3000 Supported Image File Size Max 4 Mbytes Supported image zoom in/out Max 300% Video Codec MPEG4-ASP, MPEG4-AVC(H.264), AVS, VP8 Video Resolution 1920 x 1080 (WMV 9: Max 8Mbps, 1280x720, WMV 8: 640x480) Audio Codec MP3, OGG, WMA … Subtitles SMI •• Files not compatible with supported specifications •• Modified files (files with modified file Unsupported files formats) •• Transformed files (example: AVI files encoded with WMV video codec) •• Files without indexes 42 The current car position as shown on the navigation may differ from the actual position under the following conditions. • When driving on Y-shaped roads with narrow angles, the current position may be displayed in the opposite direction. • Within city streets, the current position may be displayed on the opposite side or on an off-road position. • When changing the zoom level from maximum to a different level, the current position may become displayed on a different road. studless tires). • When using tires of improper size. • When the tire pressure for the 4 tires are different. • When the replacement tire is worn or used (Especially studless tires having passed a second season). • When driving near high-rise buildings. • When a roof carrier has been installed. • If the vehicle is loaded onto a ferry or a car transport vehicle, the current position may become stalled on the last position prior to loading. • When a long distance route is calculated while driving on an expressway, in such cases, continued driving will automatically enable the system to conduct map matching or use updated GNSS information to provide the current position (In such cases, up to several minutes may be required). • When entering a road after passing an underground parking structure, building parking structure or roads with many rotations. Correct route guidance may not occur due to search conditions or driving position. The following occurrences are not malfunctions: • When driving in heavy traffic with frequent starts and stops. • Guidance to go straight may be given while driving on a straight road. • When driving under slippery conditions, such as heavy sand, snow, etc.. • Guidance may not be given even when having turned at an intersection. • When the tires have recently been replaced (Especially upon use of spare or • There are certain intersections in which guidance may not occur. ENGLISH Before thinking there is a product defect • A route guidance signaling for a u-turn may occur in some No u-turn intersections. • Route guidance signaling entrance into a No-entry zone may occur (No-entry zone, road under construction, etc.). • Guidance may be given to a position that is not the actual destination if roads to reach the actual destination do not exist or are too narrow. • Faulty voice guidance may be given if the vehicle breaks away from the designated route. (e.g. if a turn is made at an intersection while the navigation provided guidance to go straight.) These situations may occur after conducting route calculation. The following occurrences are not malfunctions: • Guidance may be given to a position differing from the current position when turning at an intersection. • When driving in high speeds, route recalculation may take a longer period of time. 43 Trouble shooting 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your dealer Problem Possible Cause There are small red, blue, or green dots on the screen Because the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency may occur within 0.01% of total pixels. The sound or image is not working •• Has the Switch for the vehicle been turned to [ACC] or [ON]? •• Has the SYSTEM been turned OFF? The screen is being displayed but sound is not working •• Has the volume been set to a low level? •• Has the volume been muted? When the power is turned on, the corners of the screen are dark •• The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a malfunction. •• If the screen is very dark, contact your nearest dealer for assistance. Sound is working from only one speaker Are the positions of Fader or Balance sound controls adjusted to only one side? Sound does not work in AUX mode Are the audio connector jacks fully inserted into the AUX terminal? The external device is not working Is the external device connected with a standard connector cable? When turning power on, the most recent mode screen is not displayed Within modes that play files by reading external sources, such as USB, iPod, or Bluetooth® streaming mode, the most recently played mode screen prior to turning off power may not properly load. •• If the corresponding device is not connected, the mode operated prior to the most recent mode will operate. •• If the previous mode still cannot be properly played, the mode operated prior to that will operate. 44 Problem The power does not turn on. ENGLISH Trouble shooting Possible Cause Countermeasure The fuse is disconnected. •• Replace with a suitable fuse. •• If the fuse is disconnected again, please contact your point of purchase or service center. Device is not properly connected. Check to see that the device has been properly connected. The system does not play. The vehicle battery is low. Charge the battery if the problem persists, contact your point of purchase or service center. The image colour/ tone quality is low. The brightness, and contrast levels are not set properly. Properly adjust the brightness, and contrast levels through Display Setup. The volume level is set to the lowest level. Adjust the volume level. The connection is not proper. Check to see that the device has been properly connected. The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode. The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode. Sound does not work. 45 Trouble shooting Problem The sound or image quality is low. The USB does not work The iPod is not recognised even though it has been connected 46 Possible Cause Countermeasure Vibration is occurring from where the conversion switch has been installed. The sound may be short circuited and the image distorted if the device vibrates. Image colour/tone quality is low. The device will return to normal once vibrations stop. USB memory is damaged. Please use after formatting the USB into FAT 12/16/32 format. USB memory has been contaminated. Remove any foreign substances on the contact surface of the USB memory and multimedia terminal. A separately purchased USB HUB is being used. Directly connect the USB memory with the multimedia terminal on the vehicle. A USB extension cable is being used. Directly connect the USB memory with the multimedia terminal on the vehicle. A USB which is not a Metal Cover Type USB Memory is being used. Use standard USB Memory. An HDD type, CF, SD Memory is being used. Use standard USB Memory. There are no music files which can be played. Only MP3, WMA file formats are supported. Please use only the supported music file formats. There are no titles which can be played. Use iTunes to download and save MP3 files into the iPod. The iPod firmware version has not been properly updated. Use iTunes to update the firmware version and reconnect the iPod with the device. The iPod device does not recognise downloads. Reset the iPod and reconnect with the device. DC Symbol DC 12 V Speaker 4 Ω Puse 10 A - Minus Ground FCC Information This equipment has been tested and found to comply with the limits for a Class В digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Іf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:02:02 16:02:48+09:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2017:02:08 15:33:59+09:00 Has XFA : No Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:02:08 15:33:59+09:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:8d79ad23-9804-4728-bca3-5807a2dc5a4f Original Document ID : xmp.did:C63CB2835BC7E011A576A84951A0F6B2 Document ID : xmp.id:B21C4A420DE9E611B01FA3FD18846399 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:DFCB914FE9E8E611B01FA3FD18846399 Derived From Document ID : xmp.did:DFCB914FE9E8E611B01FA3FD18846399 Derived From Original Document ID: xmp.did:C63CB2835BC7E011A576A84951A0F6B2 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2017:02:02 16:02:48+09:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 48EXIF Metadata provided by EXIF.tools