MOVIL LOGIX ASIA HO-201 Bluetooth Headphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2868044
Application ID	LYtSValJYNhaxYQIQf5NLg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.64kB (95502 bits)
Date Submitted	2016-01-10 00:00:00
Date Available	2016-01-10 00:00:00
Creation Date	2016-01-08 09:34:57
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2016-01-08 09:34:57
Document Title	Microsoft Word - SN-P13 Guide Book English version.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User Guide
Thank you！
Thank you for choosing our Bluetooth Wireless Stereo Headset. Please read this guide carefully before use.
Check the Items
1, Headset body
2, USB charge cable
3, User Guide
4, Dual 3.5mm audio jack cable
Product Specification
Version of bluetooth
Bluetooth protocol
Transmission power
Effective distance
*Working hours of the headset
Charging input voltage
Charge time of the headset
FM frequency：87.5-108MHz
Bluetooth V2.0 +Edr
Hsp/hfp/a2dp/avrcp
Class II
10m
About4.5hours
Dc: +5.0±0.25V
About 2.0 hours
*Note: Due to different pairing devices and using environment, the working hours of the headset are different.
1. Product
1,
：Short press to answer the call；Long press to refuse the call；Press 2 times continuous to redial.
2， FM/MP3：Short press to change the mode, Bluetooth/MP3/FM radio.
3，
/V—
：In Bluetooth mode, Short press: Previous, Long press: volume-；
In MP3 mode, Short press: Previous, Long press: volume-；
In FM mode, Short press: Previous frequency, Long press: volume-；
4，
/V+
：In Bluetooth mode, Short press: Next, Long press: volume+；
In MP3 mode, Short press: Next, Long press: volume+；
In FM mode, Short press: Next frequency, Long press: volume+；
5，
：Long press three seconds is power on or off，short press during using is to Play or Pause。
2. Charge the Headset
This headset has an internal rechargeable battery. The battery must be fully charged before you can start to use the
headset.
1,Connect one end of the USB cable to the USB interface of the computer, and the other end to the charge interface of the
headset. Red light on: charging. Red light off: charged fully.
2,Charge time: about 2.0hours
3. Pair the Headset with a Bluetooth Cell Phone or a Computer
First, please make sure the bluetooth function is available for the cell phone (or the Computer). Specific pairing
procedures shall be different depending on different cell phones (or Computers). For detailed information, please read the
Cell Phone (or the Computer) User Guide concerning the pairing guidance of bluetooth devices.
The pairing procedures are as follow:
1, Keep the distance between the cell phone (or the computer) and the headset within 1m.
2, Make the headset enter into the pairing mode(please refer to the “pairing mode”)
3, Active the bluetooth function of the cell phone (or the computer), to search for the bluetooth devices. After finishing
the search, select “P13” in the device list displayed.
4, Press “yes” or “enter” key to confirm the sucessful pairing in accordance with the hint of the cell phone (or the
computer).
5, After the successful connection, the blue light of the headset with flash slowly.
4. LED light indicator
1, In Bluetooth mode, the blue light will be twinkle flash, when the headphone matches the phone sucessfully, the blue
light will slow flashing when connection successfully.
2, In MP3 mode, the blue light will slow flashing when playing;
3, In FM mode, the blue light is on steadily when listening the FM radio, the light twinkles fast when searching the FM
radio;
4, In charging mode, the red light is on steadily when charging, when it is fully charged, the red light will be off.
5. FAQ
— Why the red light off at the beginning of charge?
------Please make sure the connection between charge device and the headset is good. If the headset is not used for a long
time, the red light will be on after charging for about 30 minutes.
— How long is the operational distance between the headset and the pairing device?
------According to the bluetooth standard, the maximum controllable distance of ClassII type headset is 10m, but it is
different due to specific environment and different pairing devices.
— Why does the cell phone fail to find the connection with the headset?
------If either of the headset and the cell phone is not in pairing mode, the phone couldnot find the connection with the
headset. Therefore, please make sure the headset and the cell is in pairing mode.
— Why does no sound come out from headset?
------Please confirm that whether the headset is under working state or not.
------Please check that whether the volume of the headset is appropriate or not, and press “V+” key for adjustment.
------Please check that whether the connection between the headset and the cell phone is normal or not.
------Please make sure that the headset is within the controllable range or not.
— Why is the calling effect of the headset not good?
------Please check the local signal intensity of the cell phone.
------Please check that whether the headset is within the controllable range or not.
— Why cannot remote control be realized for the headset during music playing?
------This function requires the device paired with the headset supporting the Avrcp protocol.
— Why the headset could not be swithced on?
------Please check if the battery is sufficient or not.
9. Dos and Don’ts
— Keep the product dry. Do not store it in damp areas.
— Do not exposure the product to the sun or high temperature.
— Do not attempt to open the product, especially operated by non-professional person.
— Do not make the product fall down, shake the product violently, or strike the product with hard objects.
— Do not use harsh chemicals or cleaner to clean the headset.
— Do not use something sharp to scratch the surface of the product.
— Do not continuously charge the headset for over 10 hours to avoid affecting the service life.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by MOVIL LOGIX ASIA LIMITED
may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to
this equipment. Such modifications could void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2016:01:08 09:34:57+08:00
Create Date                     : 2016:01:08 09:34:57+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SN-P13 Guide Book English version.doc
Creator                         : Administrator
Document ID                     : uuid:9e73e13c-6bb8-42e2-8ca3-8ee3d9ffa5b0
Instance ID                     : uuid:bfe2ca1a-930e-4291-958f-cbe76c858f9d
Page Count                      : 3
Author                          : Administrator

EXIF Metadata provided by EXIF.tools