MOVON ONYX BLUETOOTH STEREO SPEAKER User Manual ONYX manual indd

MOVON Corporation BLUETOOTH STEREO SPEAKER ONYX manual indd

User Manual

 What’s in the box?                  ONYX                                         AC adapter            3.5mm stereo cable                   User manual Getting to know the ONYX-1-※ Please, use provided adapter only.SpeakerVolume Control WheelMICLEDMFB (Multi Function Button)AUX IN PortON/OFF Switch
 Using your Speaker TURING ON/OFF CHARGE THE BATTERY  Before using speaker, charge the battery completely.   To charge the battery, connect the power supply to the speaker and plug it into a live AC outlet.   The Red LED remains on while the speaker is charging and Red LED will be off when charging is   completed.-2-Turning ON Turning OFF
 CHECKING THE BATTERY LEVEL  The battery status indicator will be shown on iPhone or iPad  LOW BATTERY ALARM    When battery is low, speaker will alarm with beep every 1 minute.     Once you hear beep alert, please charge immediately. TO BEGIN PAIRING WITH A BLUETOOTH DEVICES  1. Turn the ONYX on. When turned on for the first time, ONYX will go to pairing mode automatically.      Or Press the MFB button for 3 seconds until LED blinks as Blue.-3-
-4-  2. Set you Mobile phone or Bluetooth device to Bluetooth discoverable mode. (Visibility on)  3. Set your Mobile phone or Bluetooth device to discover the ONYX, then locate the Bluetooth device        list.  4. From the Bluetooth device list, select the device named “ONYX”  5. If your devices asks for a passkey, enter digits 0000 (four zeros) and press OK.  6. Your Bluetooth devices indicates when pairing is completed.       The ONYX speaker announce as “Connected” when pairing is competed and Blue LED remains.       ※ Auto Reconnection          ONYX will try to re-connect to the latest connected Bluetooth device when you turn on ONYX.      ※ Simple Pairing          If your devices support Bluetooth v2.1 or higher version, you don’t need to passkey to pair.      ※ Easy Pairing          The ONYX goes into pairing mode automatically for the first time you use it.
 TO ADD ANOTHER SOURCE       You can use another audio device with ONYX. This requires using an 3.5mm stereo cable with        a 3.5mm plug on one end to connect with the AUX port on ONYX. PLAYING MUSIC       Play / Pause Music: Press the MFB button shortly MAKING A CALL        Last call redialing: Press MFB button twice.       Voice dialing : To activate or deactivate voice dialing, press the MFB button for 1 second.    [NOTE] Make sure your mobile phone is supported voice dialing function (Check your mobile phone instruction manual)-5-
-6- ANSWER / END A CALL   Press the MFB button. DECLINE AN INCOMING CALL   Press the MFB button for 1 second. Transfer a call from ONYX to Mobile phone (or Mobile phone to ONYX)   Press the MFB button for 1 second. VOLUME CONTROLS   Increase and Decrease the volume using volume control wheel.  There will be beep sound on minimum and maximum volume level. MUTING   Mute or Unmute the built-in microphone by holding MFB button for 3 seconds. RESET THE ONYX   Press MFB button for 3 seconds on pairing mode stage.
  Status   LED Lighting   Beep / Voice announcement  Power On   LED flashes in Blue 3 times   Power ON  Pairing mode   LED flashes in Blue rapidly     Disconnected mode   LED flashes in Blue every 5 seconds   Disconnected  Connected mode   LED flashed in Blue 2 times every 5 seconds   Connected  Making a call  LED flashed in Blue 3 times every 5 seconds  Incoming call  LED flashes in Blue 2 times every 2 seconds  Ring  Playing a music  LED flashes in Blue 3 times every 5 seconds  Mute   Beep in every 10 seconds  Reset  LED flashes in Blue 5 times  Beep   Low battery  Charging   Steadily RED LED  on  Charging complete   Red LED is turned off  Status-7-
-8- Specification   Model Name   ONYX  Bluetooth Core Spec   Bluetooth Specification 3.0  Profile   HSP/HFP1.6(Wide Band Speech), A2DP, AVRCP  Bluetooth Class   Class 2  Coverage Range   10 Meters  Continuous Play Time    approx. 10 Hours   Standby Time    approx. 500 Hours  Weight   1100g  Charging Voltage   DC 5.0 V  Charging Time   approx. 3 Hours  Operating Temperature   -10° to +50°C  Storage Temperature   -20° to +70°C  Output Power   6 W (2 CH, 3 W x 2)  Battery   Lithium Polymer 3.7V 1500mAh
SAFETY AND GENERAL INFORMATION1. Please read this guidebook carefully and follow the instruction.2. To avoid any damage or malfunction of the unit, do not drop it from high place.3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid directly, then     do not operate it normally to avoid any electrical shock, explosion and damage of the unit.4. Do not place or keep the unit near the heat sources such as direct sun light, radiators, stoves or other apparatus which produce heat.      It may cause explosion, degrade of performance  and reduce battery life.5. Do not modify, repair & disassemble unit at discretion (especially battery: it may cause an explosion.6. Do not place the heavy objects on the unit.7. Use only supplied and approved charger.8. Replacement or service must be done at a quali ed service center or manufacturer.9. Unplug this unit when unused for long period of time or during lightening storms.    [CAUTIONS] ELECTRIC SHOCK HAZARD                              The battery used in this device may present a risk of  re or chemical burn if mis-treated.FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modi cations to this equipment may cause harmful interference unless the modi cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modi cation is made.    [NOTE] This equipment has been tested and found to comply with the limits for a Class B digital device, purchant to Part 15 of the FCC Rules.                    These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,                    uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference                    to radio communications. However, there is no guarantee that interference will not occur in a particular installation.                  If this equipment does cause harmful interference by one or more of the following measures:
                    Reorient or relocate the receiving antenna.                    Increase the separation between the equipment and receiver.                                       is connected.                    Consult the dealer or an experienced radio/TV technician for help.”FCC RF Radiation Exposure Statement1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be         installed and operated with a minimum distance of 20 centimeters between the radiator and your body.EUThis product is CE marked according to the provision of the R&TTE Directive (99/5/EC).Here by MOVON Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.  Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France,Germany, Greece, Ireland, Italy, Luxem-bourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland.  Bluetooth is a trademark owned by the Bluetooth SIG, Inc.
WARRANTYThe condition of this warranty and our responsibilities under this warranty are as follows: Supplier’s warranty is non-transferable. And this warranty is limited to the original purchaser only.    You must be able to prove the date of original purchase of the unit with a dated receipt.    The warranty is not applicable if the product has been subject to physical abuse, improper installation, modi cation or repair      by unauthorized third party.    The responsibility of supplier’s products shall be limited to the repair or replacement of the product at it’s sole discretion.    Speci cally exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries,     decorates and other accessories.    A supplier will not take any responsibility if the failure of the unit has resulted from accident, abuse,misuse or any unauthorized repair,       modi cation or disassemble.    Modi cation and repair of the unit should be done by authorized and quali ed service personnel,center or returned to the manufacturer.    This warranty gives you speci c legal rights and you may also have other rights which vary  under local laws.WEEE SYMBOL INFORMATION                                                                            Correct Disposal of This Product                          (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government o  ce, for details of where
and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.          [IMPORTANT NOTE] To comply with RF exposure requirements, this device may not be co-located with  any other transmitter                                                     or  antenna. Troubleshooting   Speaker will not turn on  Make sure ONYX is charged or connected to AC outlet  No audio from Bluetooth devices  Turn up the volume on your Bluetooth devices or Bluetooth devices. Make sure the ONYX is not muted. Your Bluetooth devices may be out of range. Make sure your Bluetooth devices is not connected to ONYX.  Hearing Distortion  Make sure ONYX is charged up. Make sure ONYX is not out of range.  Unable to connect  Make sure your devices is Bluetooth compatible. Make sure the Bluetooth capability on your device is turned on. Your Bluetooth devices may be out of range.

Navigation menu