MSA Innovation 10058539 RFID Tag Writer User Manual

Mine Safety Appliances Company RFID Tag Writer 10024089 10 22

a href="https://usermanual.wiki/MSA-Innovation" itemprop="url"> MSA Innovation >

User Manual

TAL 507 (L) Rev. 0 © MSA 2005 Prnt. Spec. 10000005389(A) Mat. 10067066Doc. 10067066The warranties made by MSA with respect to the product are voided if the product isnot used and maintained in accordance with the instructions in this manual. Pleaseprotect yourself and your employees by following the instructions. Please read andobserve the WARNINGS and CAUTIONS inside. For any additional information relativeto use or repair, write or call 1-800-MSA-2222 during regular working hours.This device complies with Part15 of the FCC Rules. Operation is subject to the follow-ing two conditions; (1) this device may not cause harmful interference, and (2) thisdevice must accept any interference received, including interference that may causeundesired operation. Changes or modifications not expressly approved by the manu-facture could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a ClassAdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is oper-ated in a commercial environment. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used in accordance with the instruc-tion manual, may cause harmful interference to radio communications. Operation ofthis equipment in a residential area is likely to cause harmful interference in which casethe user will be required to correct the interference at his own expense.THIS MANUAL MUST BE CAREFULLY READ AND FOLLOWED BY ALL PERSONS WHOHAVE, OR WILL HAVE, THE RESPONSIBILITY FOR UPGRADING THE AIR MASK. ThisAir Mask will performas designed only if upgrading according to the Instructions.OTHERWISE IT COULD FAIL TO PERFORM AS DESIGNED, AND PERSONS WHO RELYON THE AIR MASK COULD SUSTAIN SERIOUS PERSONAL INJURY OR DEATH.SOFTWARE INSTRUCTIONSICM®Tx Unit DataProgram
ICM TXCONTENTS CD Rom ICM Tx Reader / ID Tag WriterUser’s Instructions USB cableSystem RequirementsOperating System: Windows 98 or higherPC requirements: 200 Mhz CPU, 64 MB RAM, 50 MBFree HardDisk Space, USB 1.1 port.This PC software for the ICM was prepared and testedcarefully and conscientiously. Because of the greatvariety of hardware and software that exists, it is notpossible to check all applications. Therefore the use ofthe CD-ROM on a PC workplace or in a network shalltake place solely at the user’s risk. MSA shall assumeno guarantee or liability whatsoever for the use of thesoftwareon a PC workplace or for implementationand use in a network or any direct, indirect or remoteconsequential damage arising from this.1. Connect the ICM Tx Reader/ ID Tag Writer to an avail-able USB porton the PC.2. Insert CD-ROM into computer. An instructions screenwill automatically appear. Follow instructions onscreen.ID TagThe ID Tag (P/N10058545) is not provided as a part of theICM Tx Reader / ID Tag Writer Kit. The purpose of the ID Tag is to associate a user ID orjump seat location with the ICM Tx Unit. Once the ICMTx Unit has read the ID data from a tag, that ID will remainassociated with the ICM Tx Unit until another ID Tag hasbeen read or enough time has elapsed. Prior to pressurization ofthe SCBA and duringinspection, the user can“tag in” by depressing andholding the top mode but-ton (green) until the word“DATA” appears in the dis-play. While “data” is dis-played, position the ID tagas shown in the picturebelow.The ICM will soundasingle beep confirmingthat the ID data has been read. Correct ID Tag orientation. The ID Tag has a space for the user to place a label inwhich the ID information can be written on the outside ofthe ID Tag for easy identification. This space is locatedon the side of the ID Tag opposite the approval label. Tomaintain the ID Tag’sIntrinsic Safety Approval, anylabel that the user attaches to the ID tag must be lessthan 4 squarecentimeters in total area. FIRST SCREEN – ICM TX READER / ID TAG WRITER Note: The ICM Tx Reader/ ID Tag Writer must be con-nected and recognized by the PC beforestarting ICMsoftware program. A green LED should light on the ICMTx Reader / ID tag writer box. 1. Two icons will appear, one showing the ICM Tx Unitand one showing the ID Tag. This softwareallows fordownloading of the ICM Tx Unit or storing ID informa-tion on the ID Tag. 2. Choose the desired function by clicking on the appro-priate picture.Note: This selection can also be made by clicking “File”and then selecting either “ICM Link” or “Tag Writer”. 3. Refer to the appropriate section below for furtherdetails and instructions.2TAL 507 (L) Rev. 0 - 10067066 TABLE OF CONTENTSContents..................................................................................................................................................................................2First Screen .............................................................................................................................................................................2ICM Link ..................................................................................................................................................................................3ID Tag Writer............................................................................................................................................................................4
Download:
Mirror Download [FCC.gov]
Document ID632469
Application IDGmDN/hXww86RNqMwagwE0g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize19.54kB (244253 bits)
Date Submitted2006-02-28 00:00:00
Date Available2006-02-28 00:00:00
Creation Date2005-08-09 09:14:55
Producing SoftwareQuarkXPress(tm) 6.5
Document Lastmod2005-08-10 13:32:11
Document Title10024089-10/22
Document CreatorQuarkXPress(tm) 6.5
FCC ID Filing: P9R-10058539

Navigation menu