MYLAPS TNETX Race Car Lap Timing Transmitter User Manual TnetX Kit manualx

Download:
Mirror Download [FCC.gov]
Document ID	1289096
Application ID	pNiJIyOX6CNbUn/pT5aQ7g==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.83kB (122933 bits)
Date Submitted	2010-06-01 00:00:00
Date Available	2010-06-02 00:00:00
Creation Date	2010-05-18 16:03:07
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2010-05-18 16:03:07
Document Title	Microsoft Word - TnetX Kit manual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jwillemse

Contact Information
MYLAPS EMEA Office
Haarlem
The Netherlands
Tel: +31 23 529 1893
E-mail:
info@mylaps.com
MYLAPS Americas Office
Atlanta
USA
Tel: +1 (678) 816 4000
E-mail:
info.americas@mylaps.com
MYLAPS Japan Office
Tokyo
Japan
Tel: +81 3 5275 4600
Email:
info.japan@mylaps.com
MYLAPS Asia Pacific Office
Sydney
Australia
Tel: +61 (0)2 9546 2606
Email:
info.asia.pacific@mylaps.com
www.mylaps.com
All rights reserved
Copyright © 2008-2010 MYLAPS (previously AMB i.t. BV)
This publication has been written with great care. However, the manufacturer cannot be held responsible, either for
any errors occurring in this publication or for their consequences.
The sale of products, services of goods governed under this publication are covered by MYLAPS’s standard Terms and
Conditions of Sales and this product manual is provided solely for informational purposes. This publication is to be
used for the standard model of the product of the type given on the cover page.
MYLAPS
Manual: MYLAPS TnetX kit / 05-2010
Content
Contact Information.....................................................................
1 System overview.......................................................................
2 Installation................................................................................
2.1 Installation sequence.......................................................
2.1.1 2-Way Communicator..............................................
2.1.2 2-Way BreakOutBox................................................
2.4 Warning and cautions.......................................................
3 Technical Specifications..............................................................
6 Guarantees & Warranties............................................................
Appendix 1: CE and FCC regulations...............................................
1 System Overview
2 Installation
2.1 Installation sequence
Recommended positions:
1. 2-Way Communicator – in the wheel well or underneath the vehicle
2. 2-Way BreakOutBox – inside the driver compartment
2.1.1 2-Way Communicator
The 2-Way Communicator is the device that receives your official timing and positioning information (based on your
personal transponder).
For optimal communication performance with the timing system, the 2-Way Communicator must be installed
according to the installation requirements.
Installation requirements:
• The 2-Way Communicator should have a clear view to the track;
• The 2-Way Communicator is mounted max. 30cm (1ft) from the track;
• The 2-Way Communicator should not be installed within 30cm (1ft) of your Personal Transponder;
• Maximum operating temperature should not exceed 50°C/122F;
• No electrical wires or electrical devices within 10cm (4 in) to the 2-Way Communicator;
• No carbon fiber around the 2-Way Communicator.
Mounting instructions:
• Mount the 2-Way Communicator with the two mounting bolts provided in the kit;
• Route the cable to the 2-Way BreakOutBox;
• Secure the electrical cable of the 2-Way Communicator with tie wraps;
• Make sure that the electrical cable cannot be cut, stressed, or damaged.
• Recommended positions for the 2-Way Communicator:
• In wheel case
• On bottom plate
Note:
A loose item in a race vehicle can be very dangerous! Make sure the 2-Way Communicator cannot get detached. Use
additional tie-wraps to secure it if necessary.
2.1.2 2-Way BreakOutBox
The 2-Way BreakOutBox is the device that establishes the connection between the 2-Way Communicator and the
Onboard Display. The 2-Way BreakOutBox provides power and data to the 2-Way Communicator and Onboard
Display.
Installation requirements:
• Locate a switched +12V power line and a ground (negative (-)) line;
• Position the power cable of the 2-Way BreakOutBox in the vehicle and cut the power cable to fit;
• Take the black shrink sleeve and slide it over the black (negative (-)) wire of the power cable;
• Take the red shrink sleeve and slide it over the red (+12V) wire of the power cable;
• Solder the fuse holder with the blue ring plug to the black (negative (-)) wire of the power cable;
• Solder the fuse holder with the red ring plug to the red (positive (+)) wire of the power cable;
• Shrink both shrink sleeves to isolate the solderings;
• Connect the power cable with the blue ring plug to the ground line (negative (-) pole) of the battery;
• Connect the power cable with the red ring plug to the switched +12V power line (positive (+) pole) of the
battery.
THE 2-WAY BREAKOUTBOX POWER CABLES MUST BE SOLDERED TO THE FUSE HOLDERS IN ORDER TO PREVENT
YOUR KIT AND ALL OTHER EQUIPMENT FROM DAMAGE!
Mounting instruction:
• Use 2 of the supplied Velcro strips to mount the 2-Way BreakOutBox inside the driver compartment.
2.2 Warnings and cautions
• While installing make sure not to damage any part of the fueling system, electrical wiring system, steering
system or break system;
• Do not mount any component of the TnetX kit where it can interfere with any of the onboard safety systems
• The TnetX kit is designed for negative earth 12V DC operation only;
• Keep all electrical wiring away from moving parts, use tie-wraps to secure the cabling;
• Make sure the isolation of cabling does not get damaged;
• Connect the RED power lead only after all other leads have been connected;
• Secure the cables so they will not interfere with driving operations.
3 Technical Specifications
2-Way BreakOutBox
Power requirements:
Current drain:
Dimensions:
Operating temperature:
Weight:
12V DC
20 mA
67 x 28 x 18 mm
-10 ºC ….. +55 ºC
220g
2-Way Communicator
Power requirements:
Current drain:
Dimensions:
Operating temperature:
Weight:
12V DC
100 mA
71 x 53 x 29 mm
-10 ºC ….. +55 ºC
120g
Specifications are subject to change without notice.
6 Guarantees & Warranties
MYLAPS, formerly AMB, warrants that, for a period of three (3) years from the date of shipping the decoders and the
MYLAPS MX Rechargeable Power (AMBmx), MYLAPS RC DP (AMBrc DP), MYLAPS KART DP (TranX160 DP),
MYLAPS Kart Rechargeable Power (TranX160), MYLAPS Car/Bike DP (TranX260 DP), MYLAPS Car/Bike
Rechargeable Power (TranX260), MYLAPS Car/Bike Pro (TranX Pro) transponders covered by this warranty with
defects, as determined solely by MYLAPS, caused by faulty materials, workmanship or design will be repaired or
replaced, unless such defects were the result of any of the following: shipping; improper installation, maintenance or
use; abnormal conditions of operation; attempted modification or repair by the customer or any third party; use of the
goods in combination with other items; or an act of God. If repair or replacement of the goods is not possible or
economical for MYLAPS, MYLAPS may, at its option, refund the purchase price of the goods or deliver replacement
goods at its sole discretion. MYLAPS’s liability shall be strictly limited to replacing, repairing or issuing credits at its
option.
MYLAPS warrants that, for a period of two (2) years from the date of shipping the ProChip, MYLAPS Kart Fixed Power
(TranX140) and the MYLAPS RC Rechargeable Power (AMBrc) transponders covered by this warranty with defects,
as determined solely by MYLAPS, caused by faulty materials, workmanship or design will be repaired or replaced,
unless such defects were the result of any of the following: shipping; improper installation, maintenance or use;
abnormal conditions of operation; attempted modification or repair by the customer or any third party; use of the goods
in combination with other items; or an act of God. If repair or replacement of the goods is not possible or economical
for MYLAPS, MYLAPS may, at its option, refund the purchase price of the goods or deliver replacement goods at its
sole discretion. MYLAPS’s liability shall be strictly limited to replacing, repairing or issuing credits at its option.
MYLAPS warrants that, for a period of one (1) year from the date of shipping the MYLAPS TnetX Kit covered by this
warranty with defects, as determined solely by MYLAPS, caused by faulty materials, workmanship or design will be
repaired or replaced, unless such defects were the result of any of the following: shipping; improper installation,
maintenance or use; abnormal conditions of operation; attempted modification or repair by the customer or any third
party; use of the goods in combination with other items; or an act of God. If repair or replacement of the goods is not
possible or economical for MYLAPS, MYLAPS may, at its option, refund the purchase price of the goods or deliver
replacement goods at its sole discretion. MYLAPS’s liability shall be strictly limited to replacing, repairing or issuing
credits
at
its
option.
MYLAPS warrants that, for a period of one (1) year from the date of shipping, all other goods covered by this warranty
with defects, as determined solely by MYLAPS, caused by faulty materials, workmanship or design will be repaired or
replaced, unless such defects were the result of any of the following: shipping; improper installation, maintenance or
use; abnormal conditions of operation; attempted modification or repair by the customer or any third party; use of the
goods in combination with other items; or an act of God. If repair or replacement of the goods is not possible or
economical for MYLAPS, MYLAPS may, at its option, refund the purchase price of the goods or deliver replacement
goods at its sole discretion. MYLAPS’s liability shall be strictly limited to replacing, repairing or issuing credits at its
option.
If the requirements set forth above and described under Remedies and Damages are not complied with, our
warranty/guarantee shall not apply and we shall be discharged from all liability arising from the supply of defective
goods.
EXCEPT AS EXPRESSLY PROVIDED IN THIS SECTION, MYLAPS MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND, NATURE OR DESCRIPTION, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OR MERCHANTABILITY, FITNESS OF THE GOODS FOR ANY PARTICULAR
PURPOSE, OR NONINFRINGEMENT, AND MYLAPS HEREBY DISCLAIMS THE SAME.
Remedies and Damages
1. MYLAPS shall not incur any liability under the above warranty unless:
i) MYLAPS is promptly notified in writing upon discovery by the customer that such goods do not conform to the
warranty, and the appropriate invoice number and date of purchase information is supplied;
ii) The alleged defective goods are returned to MYLAPS carriage pre-paid;
iii) Examination by MYLAPS of goods shall confirm that the alleged defect exists and has not been caused by
unauthorized use (including, without limitation, the use of an AMB decoder with non-MYLAPS hardware) misuse,
neglect, method of storage, faulty installation, handling, or by alteration or accident; and
iv) With respect to MYLAPS decoders, customer has upgraded the firmware in its decoder within one month after
MYLAPS has offered to provide customer with such upgraded firmware.
2. The customer acknowledges that the goods may include certain firmware imbedded therein. MYLAPS hereby
grants a license to customer to use the imbedded firmware in an MYLAPS decoder, but only to the extent the
decoder is used in connection with MYLAPS hardware. MYLAPS shall have the right to terminate the license
immediately upon written notice to customer in case MYLAPS has a reasonable belief that customer at any time
has used the MYLAPS decoder in connection with non-AMB hardware. Further, customer may not copy, compile,
reverse compile, disassemble, translate, analyze, reverse engineer or attempt to reverse engineer the firmware,
except as permitted by applicable law.
3. In addition, customer grants MYLAPS the option to repurchase any MYLAPS decoder if MYLAPS has a
reasonable belief that customer has used the MYLAPS decoder in connection with non-MYLAPS hardware. The
repurchase price shall be the fair market value on the date MYLAPS provides notice to customer that it intends to
repurchase the decoder.
The above mentioned warranty/guarantee is irrespective of any rights granted to the buyer of MYLAPS equipment
manufactured or sold by MYLAPS based on the laws of the Netherlands. Any correspondence regarding the above
mentioned guarantee must be addressed to MYLAPS:
MYLAPS EMEA OFFICE HAARLEM
Zuiderhoutlaan 4
2012 PJ HAARLEM
THE NETHERLANDS
E-mail: info@mylaps.com
Fax: +31 23 529 0156
Appendix 1 CE and FCC regulations
CE information:
This device complies with the EMC directive 89/336/EEC. A copy of the declaration of conformity can be obtained at:
MYLAPS Sports Timing
Zuiderhoutlaan 4
2012 PJ Haarlem
The Netherlands
FCC information:
Compliance statement (part 15.19)
This device complies with part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Warning (part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 8
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2010:05:18 16:03:07
Modify Date                     : 2010:05:18 16:03:07
Title                           : Microsoft Word - TnetX Kit manual.docx
Creator                         : PScript5.dll Version 5.2.2
Author                          : jwillemse

EXIF Metadata provided by EXIF.tools