Magellan Maestro 4245 Users Manual 604 0093 001 A UM

4245 to the manual 03d3d689-cbbb-4841-9021-b9511688de30

2015-02-05

: Magellan Magellan-Maestro-4245-Users-Manual-403933 magellan-maestro-4245-users-manual-403933 magellan pdf

Open the PDF directly: View PDF .
Page Count: 70

Download
Open PDF In Browser	View PDF

Magellan®
Maestro™ 4245

User Manual

Magellan Navigation, Inc. 960 Overland Court, San Dimas, CA 91773

IMPORTANT SAFETY WARNINGS
The Magellan Maestro is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using
the Magellan Maestro, these safety rules must be followed to prevent accidents that can result in injury or death to yourself
or others:
•
•

•
•

Some countries may prohibit mounting any item to your windshield. Please check the applicable regulations in your
country as regards windscreen mounting. Go to www.magellanGPS.com for alternate mounting solutions.
When driving, the need to view the display is minimal. Voice prompts will guide you to your destination. The driver
should enter data or programme the Magellan Maestro only when the vehicle is stationary. Only a vehicle passenger
should enter data or programme the Magellan Maestro while the vehicle is moving.
It is your responsibility to comply with all traffic laws.
Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs) and
business and service locations may change over time. The database does not include, analyse, process, consider, or
reflect any of the following: legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions);
road slope or grade; bridge height, width, weight or other limits; population density; neighbourhood quality or safety;
availability or proximity of police, emergency rescue, medical or other assistance; construction work zones or hazards;
road or lane closures; road, traffic or traffic facilities’ safety or condition; weather conditions; pavement characteristics
or conditions; special events; traffic congestion. It is your responsibility to disregard any unsafe, hazardous or illegal
route suggestions.
Keep the Magellan Maestro safe from extreme temperature conditions. For example, do not leave it exposed to direct
sunlight for an extended period of time.
Take care when mounting the Magellan Maestro in your vehicle, whether using the windscreen mount or other mount or
accessories, that it does not obstruct the driver’s view of the road, interfere with the operation of the vehicle’s safety
devices such as air bags, or present a hazard to occupants of the vehicle should the Magellan Maestro be dislodged
while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result of your
choices in mounting the Magellan Maestro.
Laws in some countries prohibit wearing stereo headphones while operating a motor vehicle. Please contact your state’s
Department of Motor Vehicles for information.
The battery in the Magellan Maestro is rechargeable and should not be removed. In the event that it should need to be
replaced, please contact Magellan Technical Support.

About Charging the Magellan Maestro
•
•
•
•

An optional AC adapter is available as an accessory for your Magellan Maestro. Use of another type of AC adapter can
result in malfunction and/or possible fire hazard due to battery over heating.
Only use the car charger approved for/supplied with your Magellan Maestro. Use of another type of car charger will result
in malfunctioning and/or danger.
For safety reasons, the battery in your Magellan Maestro will stop charging when the ambient temperature is less than
32°F (0°C) or more than 113°F (45°C).
It will take approximately 6 hours of charging the Maestro through the cigarette lighter adapter or optional AC adapter to
obtain a full battery charge.

About the Battery
•
•

Do not attempt to replace the battery. Please contact Magellan Technical Support for issues related to the battery.
Use the charger approved for your Magellan Maestro.

IMPORTANT SAFETY WARNINGS
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for class B digital devices, in accordance with part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
•
•
•
•

Reorient or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits specified for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is advised
that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority
to operate this equipment.

The Magellan Maestro must be installed and operated at a distance no closer then 8 inches (20 cm) from the user.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.

IMPORTANT SAFETY WARNINGS
IC statement
Operation is subject to the following two conditions:
1.
2.

This device may not cause interference and
This device must accept any interference, including interference that may cause undesired operation of the
device.

IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits established for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

The information provided in this document is subject to change without notice. Improvements and enhancements to the
product may occur without any formal notification. Check the Magellan website (www.magellanGPS) for product updates and
additional information.

© 2008 Magellan Navigation, Inc. All rights reserved. The Magellan Logo, Magellan, Maestro, TrueView, SmartDetour, and
SmartVolume are trademarks of Magellan Navigation, Inc. No part of this user manual may be reproduced or transmitted in
any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the
purchaser’s personal use, without the prior written permission of Magellan Navigation, Inc.
604-0093-001 B

iii

Table of Contents
Magellan Maestro 4245 .......................................................................................................... 1
Front View ............................................................................................................. 2
Side Views ............................................................................................................. 2
Back View ............................................................................................................. 2
Installation Instructions ........................................................................................................... 3
Selecting the Location ............................................................................................ 3
Cleaning the Area ................................................................................................... 3
Attach the Cradle to the Swivel Mount ...................................................................... 3
Secure the Swivel Mount to the Windshield .............................................................. 3
Attaching the Magellan Maestro to the Cradle ........................................................... 4
Adjust the Mount for Optimum Viewing .................................................................... 4
Connecting Power .................................................................................................. 4
Connecting Traffic Antenna ..................................................................................... 5
Check Connection and Final Adjustments ................................................................. 6
Security ................................................................................................................ 6
Country Selection ................................................................................................... 6
Fundamentals.......................................................................................................................... 7
Powering on the Magellan Maestro ........................................................................... 7
Turning the Magellan Maestro On ........................................................................ 7
Turning the Magellan Maestro Off ....................................................................... 7
Selecting Auto Power Off Time .......................................................................... 7
Volume .................................................................................................................. 7
Changing the Volume from the Map Screen. ......................................................... 7
....................................................................................................................... 7
Changing the Volume via User Options ................................................................ 8
Brightness ............................................................................................................. 8
Accessing the Brightness Control ........................................................................ 8
The Main Menu ...................................................................................................... 8
Accessing the Main Menu ................................................................................... 8
Main Menu - Page 1 .......................................................................................................9
Main Menu - Page 2 ..................................................................................................... 10
The Keypad ......................................................................................................... 11
Keypad Overview .......................................................................................................... 11
Special Keys ................................................................................................... 11
Selecting From List ....................................................................................................... 12
Notes on Entering Data .................................................................................................12

Table of Contents

Magellan Maestro 4245

Voice Control ........................................................................................................................ 13
Activating Voice Control ........................................................................................ 13
Sample Nearest Restaurant .............................................................................. 13
Quitting Voice Command ....................................................................................... 14
Tips on Speaking Voice Commands ........................................................................ 14
Map Screen .......................................................................................................................... 16
Accessing the Map Screen ................................................................................ 18
2D Mode ......................................................................................................................18
Setting the Map Modes (2D or 3D) .................................................................... 18
Panning on the Map ......................................................................................... 18
Saving a Position While Panning ....................................................................... 18
Routing to a Panned Position ............................................................................ 19
Current Location Screen ....................................................................................... 19
Accessing the Current Location Screen .............................................................. 19
Saving Your Current Location to Your Address Book ............................................ 19
List of Directions Screen ....................................................................................... 20
Accessing the List of Directions ........................................................................ 20
Excluding a Segment ....................................................................................... 20
GPS Status Screen ............................................................................................... 21
Accessing the GPS Status Screen ..................................................................... 21
Zoom Levels ........................................................................................................ 21
Setting Zoom Levels ........................................................................................ 21
Volume ................................................................................................................ 21
Changing the Volume from the Map Screen. ....................................................... 21
Home Address....................................................................................................................... 22
Creating a Home Address ................................................................................. 22
Creating a Route to the Home Address ............................................................... 22
Changing the Home Address ............................................................................. 23
Accessing the Home Address from the Address Book .......................................... 23
Enter Address........................................................................................................................ 24
Entering an Address ............................................................................................. 24
Creating a Route to a New Address .................................................................... 24
My Addresses ....................................................................................................... 25
Accessing the My Addresses Menu .................................................................... 25
Previous Destinations ................................................................................................... 25
Routing to a Previous Destination (Method 1) ..................................................... 25
Routing to a Previous Destination (Method 2) ..................................................... 26
Saving a Previous Destination to Your Address Book ............................................ 26

Table of Contents

Magellan Maestro 4245

Deleting a Previous Destination ......................................................................... 26
Address Book ...............................................................................................................27
Accessing an Address in Your Address Book ....................................................... 27
Routing to an Address in Your Address Book ...................................................... 27
Editing an Address in Your Address Book. .......................................................... 27
Deleting an Address in Your Address Book. ........................................................ 27
Favourites .................................................................................................................... 28
Accessing an Address from Favourites ............................................................... 28
Routing to an Address from Your Favourites List ................................................. 28
Editing an Address from Your Favourites List ...................................................... 28
Deleting an Address from Your Favourites List .................................................... 28
Creating a New Entry .................................................................................................... 28
Creating a New Entry in Your Address Book by Selecting it on the Map ................. 29
Creating a New Entry in Your Address Book by Entering an Address ...................... 29
Creating a New Entry in Your Address Book from a POI ....................................... 29
Points of Interest (POI) .......................................................................................................... 31
Categories and Subcategories ................................................................................ 31
Creating a Route to a POI by Category ............................................................... 31
Creating a Route to a POI by Name ................................................................... 32
Enhanced POI ...................................................................................................... 33
Loading a POI File ........................................................................................... 33
Selecting Categories for Display on the Map ....................................................... 33
Setting Alarms ................................................................................................ 34
Setting Alarm Parameters ................................................................................. 34
Routing to an Enhanced POI ............................................................................. 35
Saving an Enhanced POI to Your Address Book .................................................. 35
Marco Polo .......................................................................................................... 36
Travelling on a Route ............................................................................................................ 37
Map Screen ......................................................................................................... 37
Split-Screen .................................................................................................................. 37
List of Directions ........................................................................................................... 37
You Have Arrived .......................................................................................................... 38
Types of Routes ................................................................................................... 38
Routing Method ................................................................................................... 38
Special Routing Functions .................................................................................... 39
Routing to a POI Near an Approaching Motorway Exit .......................................... 39
Quitting a Route .............................................................................................. 39
Detouring off a Route ....................................................................................... 39

Table of Contents

Magellan Maestro 4245

Changing the Route Method ............................................................................. 40
Trip Planner.......................................................................................................................... 41
Creating a Trip ................................................................................................ 41
Optimising a Trip ............................................................................................. 42
Starting a Trip ................................................................................................. 43
Editing a Trip .................................................................................................. 43
Deleting a Trip ................................................................................................ 44
Renaming a Trip .............................................................................................. 44
Exit POIs ............................................................................................................................... 45
Routing to a POI Near an Approaching Motorway Exit .......................................... 45
Roadside Assistance ............................................................................................................. 46
Overview .............................................................................................................. 46
Accessing Roadside Assistance ......................................................................... 46
Knowing your current position ........................................................................... 46
Bluetooth .............................................................................................................................. 47
Introduction ......................................................................................................... 47
Accessing the Bluetooth Main Menu .................................................................. 47
Pairing Mode ....................................................................................................... 47
Pairing a Phone with the Magellan Maestro ........................................................ 47
Establish Connection ............................................................................................ 48
Establishing a Bluetooth Connection ................................................................. 48
Place a call .......................................................................................................... 48
Placing a Call .................................................................................................. 48
Placing a Call Using the Address Book ............................................................... 49
Placing a Call Using Call History ....................................................................... 49
Placing a Call Using Redial .............................................................................. 49
Failed Call .................................................................................................................... 49
Call Connected ..................................................................................................... 50
Incoming call ....................................................................................................... 50
Answering an Incoming Call .............................................................................. 50
Setting User Options.............................................................................................................. 51
Selecting Destination Country ........................................................................... 51
Accessing System Settings ............................................................................... 51
Checking Battery Life ....................................................................................... 51
Adjusting the Volume ....................................................................................... 51
Adjusting the Display Brightness ....................................................................... 52
Setting Auto Power Off Time ............................................................................. 52

Table of Contents

Magellan Maestro 4245

Setting Time Zone ........................................................................................... 52
Selecting Units of Measure ............................................................................... 53
Displaying Contact Us Information .................................................................... 53
Displaying Product Information ......................................................................... 53
Performing Diagnostics .................................................................................... 54
Accessing the Trip Computer ............................................................................ 54
Selecting POIs to be Displayed on the Map ........................................................ 55
Deleting Addresses from the Address Book (Global) ............................................ 55
Setting the Map in 3D or 2D Mode .................................................................... 55
Setting the Map Display to Heading Up or North Up ........................................... 56
Setting Split Screen (TrueView™) Options ......................................................... 56
Setting Auto Night Map Display ........................................................................ 57
Setting Detour Options ..................................................................................... 57
Using the Simulator ......................................................................................... 58
Setting Tone Options ....................................................................................... 58
Viewing Technical GPS Information ................................................................... 59
Setting the GPS Position .................................................................................. 59
Backing Up and Restoring Data ........................................................................ 59
Backing Up Data ............................................................................................. 60
Restoring Data ................................................................................................ 60
Viewing Map Information .................................................................................. 60
Premium POI Subscription ............................................................................... 61

Table of Contents

Magellan Maestro 4245

Magellan Maestro 4245
The Magellan Maestro 4245 is a vehicle navigation product that uses GPS signals from satellites to
calculate your precise location and compute detailed routes. As it knows its position and movement,
it can then overlay this information on detailed maps provided by NAVTEQ® to provide a visual
representation of your location.
With the Magellan Maestro 4245 you can:
•

Store your home address and quickly obtain routing details to your home.

•

Create and save addresses in your address book that you can access at any time and
obtain routing information to that address.

•

Route to an address that you enter using the keypad and Magellan’s QuickSpell feature for
easy, error-free entry.

•

Route to any point of interest (POI) that has been preloaded into your Magellan Maestro.

•

Route to a POI that appears on the map while travelling simply by tapping on the POI
icon.

•

Create a trip with multiple destinations using the trip planner. Handy for business people
who need routing information to many destinations.

•

View POIs that are ahead of you on the motorway. The POI Near Exit tool provides you with
a list of petrol stations, restaurants, hotels and auto repair shops located nearby exits you
are approaching while travelling along a motorway.

•

Customise your Magellan Maestro to meet your needs using the User Options menu.

The interface for the Magellan Maestro is easy and simple to follow once you understand the basics.
You may never need to refer to this manual but if you do we have tried to present it in a form that
makes it easy for you to access the function you are trying to use and follow the steps provided.
The Magellan Maestro has a built-in battery, so, in most cases, you will be able to follow these
instructions while reading them on your computer screen without plugging the Maestro to the AC
power socket. You should note that while indoors you may not get any satellite signals, so your
location information may not be updated. However, the power of the SiRFstarIII™ chipset installed in
the Magellan Maestro will pick up satellite signals in some very demanding locations, so you may
notice the Magellan Maestro computing a position, even indoors.

This document is set up to be printed on 8.5” x 11” (letter) paper should you desire a printed version
for your reference.

Magellan Maestro 4245

Front View
A
B

Power (Top)
Reset
(Bottom)

B
Side Views
C

FM Antenna input.

USB connector. Power input from
cigarette lighter adapter or AC power
adapter (+5 VDC / 2A).

SD/MMC card slot

C
D

Back View

F
F

External GPS
Antenna Input

Speaker

Magellan Maestro 4245

Installation Instructions
Installation of the Magellan Maestro is simple and easy. The hardest part will be picking the best
location.

Selecting the Location
A few tips on selecting the proper location.
•

Mount the Magellan Maestro in a place where it can be easily seen and will not interfere
with your view of the road.

•

The Magellan Maestro should be mounted in such a way that the antenna, (located in the
top of the receiver), has an unobstructed view of the sky through the windshield.

•

Select whether it will be mounted using the adjustable mount to the windshield or an
optional adhesive disk. Be sure to check your local and regional laws before mounting to
the windshield. (Adhesive Disks are available from the Magellan Store at
www.magellanGPS.com.)

•

If planning to use an adhesive disk, a smooth surface on the dash board will need to be
selected. Do not attach the adhesive disk to the windshield nor airbag covers.

•

Make sure that the Magellan Maestro nor any cabling will be disturbed in the event that
the airbags are deployed.

Cleaning the Area
Use the alcohol pad that came with the Magellan Maestro to clean the area on the windshield that has
been selected for mounting the Magellan Maestro. Let the area dry completely.

Attach the Cradle to the Swivel Mount
Line up the two tabs on the swivel mount
with the holes on the back of the cradle.
Push the cradle down until it locks in place
with the swivel mount.

Secure the Swivel Mount to the Windshield

Please note that the swivel mount supplied with the Magellan Maestro may be different then the one shown in this
document.

Installation

Make sure that the lever at the base of the
adjustable mount is in the up position. Place
the base of the swivel mount firmly over the
area to be used. Push the lever at the base of
the swivel mount all the way down until it
snaps in place. Carefully let go of the
assembly, making sure that it is securely
mounted.

Attaching the Magellan Maestro to the Cradle
Align the tabs on the cradle to the indents on the
bottom of the Magellan Maestro. Swivel the
cradle up so that it is flush against the back of the
receiver and snap it into place.

Adjust the Mount for Optimum Viewing
Loosen the adjustment locking knobs and position the Magellan Maestro for optimum viewing. Once
set, tighten the locking knobs. (Never attempt to adjust the mount while driving.)

Connecting Power
Plug the end of the cigarette lighter adapter into a
12 VDC vehicle power receptacle. Connect the
other end of the cable to the Magellan Maestro’s
USB connector as shown. If there is power at the
receptacle, the Magellan Maestro will power on.
(Note: some vehicles apply power to the vehicle
power receptacle only when the ignition is on.)

Installation

Connecting Traffic Antenna
These instructions apply to those versions of the
Magellan Maestro that are “traffic-ready”.
Magellan Maestro’s with an external antenna input
(shown) are considered “traffic-ready”.

Traffic FM
Connector

Plug the FM antenna connector from the Vehicle
Power Cable to the FM antenna jack on the
Magellan Maestro. See the section on Traffic for
additional set up information.

Installation

Check Connection and Final Adjustments
If the power indicator light on the vehicle power cable connector is on, power is being supplied to the
Magellan Maestro. If it is not on, check the cable connection to the vehicle power receptacle. If the
light is still not on, turn the vehicle’s ignition on.
Press the power button (located at the bottom right side of the Maestro) and hold down for a few
seconds. The Magellan Maestro will power on. Sit in a normal driving position and make any final
adjustments to the swivel mount for optimum viewing. Tighten the adjusting knobs on the swivel
mount to hold the Magellan Maestro firmly in place.
Press the power button again to turn the Magellan Maestro off and turn the ignition switch to the
vehicle to off. The Magellan Maestro is connected and ready for use.

Security
It is recommended that the Magellan Maestro is not left in plain view while unattended for reasons of
theft.
Please note that the Magellan Maestro is a receiver only and does not transmit GPS location signals.
The receiver nor the vehicle can be tracked using the Magellan Maestro.

Country Selection
When the receiver is turned on for the first time it may ask you to select the maps for the desired
country. Select the country you want to use by tapping on the item from the list.
If you are travelling in other countries you will may need to change the maps used by following these
steps.
1

From the Main Menu, tap on the right arrow to access the second page of the Main Menu.

Tap on User Options.

Tap on Destination Country.

Tap on the country desired.

The Destination Country option will display the countries that are available for the Magellan Maestro
you are using.

Installation

Fundamentals
Powering on the Magellan Maestro
The On/Off button is the silver button located on the left-hand side of the Magellan Maestro as shown
in the Overview chapter.

Turning the Magellan Maestro On
1.

Press and hold the On/Off button for 1-2 seconds.

Read the Warnings and tap OK.

Turning the Magellan Maestro Off
1.

Press and hold the On/Off button for 1-2 seconds.

Selecting Auto Power Off Time
The Magellan Maestro can be set to shut down automatically after a time selected by you.
The receiver will turn off after the selected time if; A) the position hasn’t changed and B) the
touchscreen hasn’t been pressed.
1.

Access the Main Menu.

Tap the Next arrow to access the Main Menu Page 2.

Tap User Options.

Tap System Settings.

Tap Power.

Select Auto Power Off time; Never, 10 Minutes, 20 Minutes or 30 Minutes.

Tap Save.

Tap the Back arrow to return to the Main Menu.

Volume
There are two ways to access the volume controls; the first is by tapping the speaker icon on the Map
screen and the second is through User Options.

Changing the Volume from the Map Screen.
1.

Tap the speaker icon

Tap on the Mute button to mute the volume, or tap inside the volume adjust bar below the
Mute button to change the volume levels.

Tap Save.

If you have muted the volume, the speaker icon will be displayed with a line through it, indicating it is
muted. To unmute the volume, tap the speaker icon again.

Fundamentals

Changing the Volume via User Options
1.

Access the Main Menu.

Tap the Next arrow to access the Main Menu Page 2.

Tap User Options.

Tap System Settings.

Tap Volume.

Tap on the Mute button to mute the volume, or tap inside the volume adjust bar below the
Mute button to change the volume levels.

Tap Save.

Brightness
Accessing the Brightness Control
1.

Access the Main Menu.

Tap the Next arrow to access the Main Menu Page 2.

Tap User Options.

Tap System Settings.

Tap Brightness.

Tap inside the brightness adjust bar to set the desired brightness.

Tap Save.

On the Brightness screen there is a checkbox for “On-battery dimming (75%)” When checked, the
Magellan Maestro will dim to 75% of the brightness when operating exclusively on battery power.
This prolongs the battery life between charges. It can be turned off by tapping on the checkbox.

The Main Menu
The Main Menu screen is the centre for all of the Magellan Maestro’s available functions. The Main
Menu consists of two pages with large, easy to access icons.

Accessing the Main Menu
From the Map screen, tap the Menu button.
From the other screens, tap the Back button.

Fundamentals

Main Menu - Page 1

Show Map: Displays the map with your current position (if computing a position from the GPS
signals) indicated by the blue triangle. See the Map Screen chapter for details.
Enter Address: Displays Enter Address menu. Addresses can be entered by first entering the town,
post code, or by selecting a town from a list of towns you have already used as destinations. Also
provides access to your address book (my addresses) or to create a route to a town centre. See the
chapter on Routing to an Address for details.
POI-Points of Interest: Displays the Search Points of Interest menu. Search for POIs by entering the
name or by selecting from a list of available categories. Marco Polo POIs and POIs that have been
created and installed using the POI Editor software (found on the CD-ROM) can be accessed via this
menu. For more information on the Search Points of Interest menu, see the Points of Interest
chapter.
Home: If you have created a Home address, press the Home button for quick access to routing to
your home. If you have not created a Home address, you will be prompted (visually) to do so. See
the Home Button chapter for more information.
Roadside Assistance: Displays the Auto-service and Maintenance screen. For more information on
this feature, see the Roadside Assistance chapter.
Bluetooth: Displays the Bluetooth Main Menu screen. For more information on connecting to a
mobile phone, see the chapter on Bluetooth.

Fundamentals

Main Menu - Page 2

Trip Planner: Opens the Trip Planner menu where you can create, edit, delete, rename or activate a
trip.
POI Near Exit: (Accessible only while on a motorway.) Provides a list of restaurants, petrol stations,
auto repair shops or hotels near approaching motorway exits. You can select one of the presented
POIs and create a route to it.
User Options: Accesses the User Options menu. This menu can be used to access functions used for
tailoring the Magellan Maestro to your individual needs.
Home: If you have created a Home address, press the Home button for quick access to routing to
your home. If you have not created a Home address, you will be prompted (visually) to do so. See
the Home Button chapter for more information.
Roadside Assistance: Displays the Auto-service and Maintenance screen. For more information on
this feature, see the Roadside Assistance chapter.
Bluetooth: Displays the Bluetooth Main Menu screen. For more information on connecting to a
mobile phone, see the chapter on Bluetooth.

Fundamentals

The Keypad
Understanding the keypad while entering an address is an important part of using your Magellan
Maestro. The keypad is the most common method of entering data into the Magellan Maestro, and
with key features like QuickSpell, data entry is quick and easy.

Keypad Overview

Special Keys
Alphabetic Keypad

Numeric Keypad

Accented letters Keypad

Spacebar

Backspace
Accept

Fundamentals

Quit

Selecting From List
After tapping “OK” to accept your input, you may be
presented with a list of items found in the database.

Notes on Entering Data
If you are having trouble getting the results you expected, here are a few useful tips.
•

Make sure that you have spelled the name correctly. If you are unsure of the spelling, just
enter a few characters and tap “OK”. A long list of names will be displayed, but you can
step through the list and you will probably be able to find the correct spelling.

•

When the name of the town has a prefix such as ‘Saint’, ‘The’ ‘Le’, ‘La’ etc. you must
enter this prefix in order to obtain the expected result.

•

When entering a street name, you can usually enter only one of the significant words in
the street name to retrieve it from the database. However, if you are having trouble finding
the street you are looking for, we recommend trying to type in its full name.

•

The more characters you enter, the smaller the list of entries found will be.

Fundamentals

Voice Control
The Magellan Maestro includes voice control software for many of the most commonly used
commands. This provides hands-free operation of the Magellan Maestro for most of the functions you
will use on a daily basis.

Activating Voice Control
To place the Magellan Maestro in a ‘listening’ mode for voice commands, you need to first ‘wake up’
the voice control software by speaking the attention word “Magellan”. Upon waking up the Magellan
Maestro, the Say a Command screen is displayed. This is a list of available commands that can be
used for reference. The command you want to use does not need to be displayed, this list is provided
for easy reference.
1.

Speak “Magellan”.

Speak the command.
Speaking “Previous” or “Next” scrolls the list up and down.
After speaking the command, additional screens may be displayed that also can be voice
controlled.

Sample Nearest Restaurant
1.

Speak “Magellan”.

Speak “Nearest Restaurant”.

Voice Control

Speak “Chinese Food”.
Speak the number of the item in the list to
select it. Speak “Previous” or “Next” to
scroll up and down the list of items.
Say the number of the restaurant you want
to go to and the Magellan Maestro will
begin calculating the route to the chosen
destination.

Say a Command’ Choices
The following is a list of some of the commands that
can be spoken after saying the wake up word
“Magellan.”
•
•
•
•
•
•
•
•
•
•
•
•

“Roadside Assistance”
“Where am I?” or “Current Location”
“Go Home”
“Nearest Restaurant”
“Nearest Gas”
“Nearest ATM”
“Nearest Bank”
“Nearest Coffee”
“Distance to Destination”
“Cancel Route”
“Modify Route”
“Detour”

Restaurants have a shortcut that will skip the cusine screen shown in the sample. Instead of saying
“Nearest Restaurant”, say “Nearest Chinese Restaurant”.

Quitting Voice Command
If you decide to cancel the voice command you are accessing, say “Quit”.

Tips on Speaking Voice Commands
No response to commands - If the navigation unit is not responding to your commands, first try
relocating the Magellan Maestro so the microphone is closer and/or pointed towards you. Remember
to speak in a normal, natural voice. Wind noise and talk radio stations can “confuse” the voice
recognition software, so turn off the radio and roll up your windows.

Voice Control

•

Avoid speaking too soon. The most common speech recognition problem people have is
answering a question before the navigator has stopped speaking. The speech input circuits
are inactive while the navigator is outputting speech. To avoid this problem, wait for at
least one half second before answering a navigator question. You should say “one
second”.

•

Turn down the radio, especially when listening to talk radio stations.

•

Avoid speaking a command while others are talking.

•

Avoid fans blowing across the microphone. This problem occurs very often in summer
when the air conditioning is turned up high. Turn down the fan or reposition the Magellan
Maestro.

Voice Control

•

Roll up the window if road noise is too high. In some cars, the interior noise increases
dramatically with car speed. The best thing to do with noisy cars is to close the windows.
Positioning the Magellan Maestro closer to you can also help.

•

Avoid shouting. Shouting puts stress into the voice which actually degrades speech
recognition performance. If the navigator is not hearing you, try moving the Magellan
Maestro closer and lowering your voice.

Map Screen
The most commonly used screen will be the Map screen. Whether you are following a route or just
travelling around town, the chances are that the Map screen will be displayed. There are two unique
modes that the Map screen can be displayed in; normal and routing.
In normal mode, your position is shown on the map along with the time and your speed. As you travel,
your position will be updated, giving you a clear view of your position and surrounding streets.

A
B

D
I
E

F
G

Map Screen - Normal Mode

Street name currently on.

Direction indicator. Tap to view the Current Location screen where you can save your
position into your Address Book.

Zoom out

POI icon. Example shown here is for a petrol station. Tap on the POI icon to create a route to
that POI. Note: If there are multiple POIs in the same area, a list of those POIs will be
displayed. Tap on the name in the list to access the routing function.

Current position icon

Time of day

Main Menu button. Tap to display the Main Menu.

Current speed of travel

Volume control. Tap to display the Volume Setting screen where the volume can be adjusted
or muted. (If the volume has been muted, tapping this button unmutes the volume without
displaying the Volume Setting screen.)

Zoom in

Satellite Status. All four bars in green denotes the optimal satellite status. Tap to display the
GPS Status screen.

Map Screen

In routing mode additional information is displayed providing detailed information about the route
you’ve selected.

A
B
N
C
M
D
L
E
K

J
G

I
H

Map Screen - Routing Mode

Street name currently on.

Direction indicator. Tap to view the Current Location screen where you can save your
position into your Address Book.

Zoom out

Current position icon

Next segment icon. Tap on the icon to display the List of Directions screen.

Distance to next segment. Tap to repeat the last voice command.

Main Menu button. Tap to go to the Main Menu screen. Note that the Main Menu screen is
different when there is an active route. See the chapter on Routing for details.

Tap to toggle between distance remaining to reach destination, approximate time remaining
until the destination is reached and the approximate the time of day to arrive at the
destination.

Street name for the next segment

Graphical representation of the route

Zoom in

Satellite Status. All four bars in green denotes the optimal satellite status. Tap to display the
GPS Status screen.

Map Screen

Accessing the Map Screen
1.

On the Main Menu, tap Show Map.

2D Mode
The map is normally displayed in 3D mode but you can set
the map to 2D mode if so desired. Choose the mode that is
most suitable for you.
In 2D mode, you can pan across the map looking for a
location to route to or save in your address book.

Setting the Map Modes (2D or 3D)
1.

From the Map screen, tap MENU.

Tap the Next arrow to access page 2 of the Main
Menu.

Tap User Options.

Tap Map Options.

Tap 3D Map or 2D Map.

Tap Save.

Map Screen in 2D Mode

Map Screen in 3D Mode

Panning on the Map
1.

While viewing the Map screen in 2D mode, slide your finger or stylus across the map.

The location icon changes to
. (The circle is the crosshairs for a position and the red
arrow points to your current location.

To exit panning, tap

and the map is returned to your current position.

Saving a Position While Panning
1.

Pan the map until the icon crosshairs are over the location you want to save to your address
book. (Must be a position that does not have a POI icon displayed.)

Tap in the centre of the circle icon. (If nothing happens then you have not zoomed in
enough. Tap the zoom in icon and try again.)

On the Route To This Address? screen, tap Save.

Edit Information:
Tap
on the Edit Name line to create a name for this location.
Tap on any of the three (work, home, mobile) phone buttons to enter a phone number.
Tap
on the Edit Information line to add additional information. (Up to 35
characters can be entered.)

If you want to tag this location as one of your favourites, tap on the “Favourite” check box.

Map Screen

When the details for this address are acceptable, tap Save.

If you want to now route to this address tap

Tap

or if you have finished tap

to exit panning and return the icon to your current position.

Routing to a Panned Position
1.

Pan the map until the icon crosshairs are over the location you want to route to.

Tap in the centre of the circle icon. (If nothing happens then you have not zoomed in
enough. Tap the zoom in icon and try again.)

On the Route To This Address? screen, tap

Select the desired routing method and tap the Calculate Route

,
button.

Current Location Screen
This screen is accessed from the Map screen whether you are
on a route or just normal driving.
The Current Location screen displays approximate address
information, the next and previous intersections, as well as
your latitude/longitude. To the right is a compass pointing in
your direction of travel, the calculated elevation, and speed.
The bottom bar displays the current time and date.

Accessing the Current Location Screen
1.

From the Map screen, tap the direction icon in the upper left-hand corner.

Saving Your Current Location to Your Address Book
1.

Access the Current Location screen.

Tap Save

Edit Information:
Tap
on the Edit Name line to create a
name for this location.
Tap on any of the three (work, home, mobile) phone
buttons to enter a phone number.
Tap
on the Edit Information line to add
additional information. (Up to 35 characters can be
entered.)

If you want to tag this location as one of your
favourites, tap on the “Favourite” check box.

When the details for this address are acceptable, tap Save.

Map Screen

Saving Current Location

List of Directions Screen
This screen is accessed from the Map screen and
only when routing. (Note: The List of Directions
screen is not available until you begin moving on the
route.)
Each line in the list of directions provides details
about the segment in the order that they are to be
made, with the next segment at the top.
The bottom bar of the List of Directions screen
indicates the distance and time to the next segment
as well as the total distance computed for the route.
The List of Directions can be modified if you want to
exclude one of the segments, should you wish to
avoid travelling along one of the listed streets.
Instructions for excluding one of the segments are
given in this chapter.

List of Directions
The manoeuvre highlighted indicates that
you will be instructed to make a left turn in
0.8 mi on CA-57 S

Accessing the List of Directions
1.

Tap the segment icon in the lower left-hand corner of the Map screen. This icon is displayed
only when you are actively following a route.

Excluding a Segment
This is used for modifying the route, possibly to avoid routing along a particular street.
1.

Access the Maneuver List.

Tap on the item in the list with the street you want to try and avoid.

Confirm the exclusion by tapping on

The Magellan Maestro recalculates the route and displays the List of Directions with the
newly computed segments.

Map Screen

. (Tap the back arrow to quit.)

GPS Status Screen
1.

The GPS Status screen is also accessed from the
Map screen and displays the status of the GPS
satellites in a graphical format. (More technical
information on the GPS status can be found in the
User Options menu: Main Menu Page 2 > User
Options > GPS Options > GPS Status.)

Green bars indicate that the Magellan Maestro is using these
satellites to compute the position; orange bars indicate that
the Magellan Maestro is trying to lock on to the satellite
signal; and no bar shown indicates a satellite that is not
being tracked. The longer the bars, the better the signal.

GPS Status Screen

Accessing the GPS Status Screen
1.

From the Map screen, tap the GPS Signal Strength icon in the upper right-hand corner.
Tap on the back arrow to return to the Map screen.

Zoom Levels
There are 23 zoom levels in the Magellan Maestro, ranging from 100 feet to 1200 miles. Select the
zoom level that best suits your needs.

Setting Zoom Levels
1.

While viewing the Map screen, tap on the

(zoom in) or

(zoom out).

Volume
The volume can be adjusted or muted from the Map screen. (The volume can also be adjusted from
User Options > System Settings > Volume.)

Changing the Volume from the Map Screen.
1.

Tap the speaker icon

Tap on the Mute button to mute the volume, or tap inside the volume adjust bar below the
Mute button to change the volume levels.

Tap Save.

If you have muted the volume, the speaker icon will be displayed with a line through it, indicating it
is muted. To unmute the volume, tap the speaker icon again.

Map Screen

Home Address
Your home address can be entered and saved in the Magellan Maestro for quick and easy access when
you need to create a route home.

Creating a Home Address
These instructions only apply if you have never entered a home address or if it has been deleted.

Tap the Home Address icon

on the Main Menu screen.

Confirm “Do you want to enter your HOME address?” Tap Yes.

Follow the prompts to enter the address to be used as your HOME address.

When the Address screen is displayed, edit the
information and tap SAVE to continue.

The HOME address will be saved in your address
book and you will be returned to the Main Menu
screen.

Creating a Route to the Home Address
1.

Tap the Home Address icon

Tap Route.

Select the desired Routing Method and tap the
orange Calculate Route button.

Home Address

on the Main Menu screen.

Changing the Home Address
1.

Tap the Home Address icon

on the Main Menu screen.

Tap Change.

Confirm “Do you want to replace the HOME address with a new address?” Tap Yes.

Follow the prompts to enter the address to be used as your new HOME address.

When the Address screen is displayed, edit the
information and tap SAVE to continue.

The new HOME address will be saved in your
address book and you will be returned to the Main
Menu screen.

Accessing the Home Address from the Address Book
1.

From the Main Menu, tap the Enter Address icon.

Tap the My addresses icon.

Tap Address Book.

Tap List All.

The list of addresses in your address book are
displayed with the home icon on the line of your
HOME address.

Tap on the home item in the list to create a route
to, edit or delete the HOME address.

Home Address

Enter Address
The Enter Address function is used to create a route from a newly entered address, an address in your
address book or to an intersection of two streets.

Entering an Address
While creating an address the first step is to indicate what town the address is in. This can be done by
inputting the name of the town, entering the postcode for the town or by selecting a town that has
been previously used.

Creating a Route to a New Address
1.

From the Main Menu, tap the Enter Address icon.

Select the method you want to use to enter the town: Enter town, Enter zip code or Previous
Towns.
Enter Town:
Use the keypad to enter the first few
characters of the town name. Tap OK to
display the list of towns found.
Tap on the desired town in the list.

List of Towns

Enter Post Code:
Use the keypad the post code for the town.
Tap OK when the post code is complete.
Tap on the desired town in the list.

Towns with the Post Code Entered

Previous Town:
Tap on the desired town in the list.

List of previously used towns

Enter Address

With the town selected, the keypad will be displayed prompting you for the street name. Use
the keypad with QuickSpell to enter the street name. Enter the first few characters the street
name and tap OK or continue entering characters until the list of streets is displayed. You
can use street prefixes (N, E, W, S, etc.) if desired.

Use the scroll bar to the right, if necessary, to view the desired street name. Tap on the street
name to continue.

Use the keypad to enter the street number for
the address. Note in the top left corner is the
range of acceptable street numbers.

Tap Done when the address is complete.

Select the desired routing method and tap the
orange Calculate Route button to begin routing.

My Addresses
My Addresses is where you store addresses that you want to keep as future destinations, as well as
access addresses that you have visited recently that may not be in your address book. The Address
Book can store up to 100 addresses.

Accessing the My Addresses Menu
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

The My Addresses Menuwill be displayed.

Previous Destinations
Routing to a Previous Destination (Method 1)
1.

From the Main Menu, tap the Enter Address icon.

Tap on the Previous Destinationsicon.

Select the destination from the list of previous destinations.

Select the Routing Method and tap the orange Calculate Route button.

Enter Address

Routing to a Previous Destination (Method 2)
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap on Previous Destinations.

Select the destination from the list of previous destinations.

Tap on Route.

Select the Routing Method and tap the orange Calculate Route button.

Saving a Previous Destination to Your Address Book
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap on Previous Destinations.

Select the destination from the list of previous destinations.

Tap on Edit.

Apply any edits you want to make to this destination before saving.

Check Favourite if you want this addresses store in your address book as a Favourite.

Tap Save to store the address.

The Previous Destination screen will be displayed. Tap Route to route to this destination, or
tap the Back arrow to return to the list of previous destinations.

Deleting a Previous Destination
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap on Previous Destinations.

Select the destination from the list of previous destinations.

Tap on Delete.

Confirm Deletion. Tap Yes.

The Enter Address Menu will be displayed.

Enter Address

It is possible to delete all of the destinations in the Previous Destination List by accessing User
Options > Address Book Options > Clear Previous.

Address Book
Accessing an Address in Your Address Book
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap Address Book

Tap List All to view the entire contents of your address book, or tap on Search Address Book
to search for entries by name.

From the resulting list of addresses, tap on the address record you require.

Routing to an Address in Your Address Book
1.

Access the address record from your address book as described in Accessing an Address in
Your Address Book.

Tap on Route.

Select the Routing Method and tap on the orange Calculate Route button to continue.

Editing an Address in Your Address Book.
1.

Access the address record from your address book as described in Accessing an Address in
Your Address Book.

Tap on Edit.

Use the Edit Address Book screen to modify the name, information or phone numbers. The
street address cannot be changed.

Tap Save when done.

Deleting an Address in Your Address Book.
1.

Access the address record from your address book as described in Accessing an Address in
Your Address Book.

Tap on Delete.

Confirm deletion. Tap Yes.

You will be returned to the list of addresses in your address book. If the list is now empty,
you will be returned to the previous screen.

Enter Address

Favourites
Favourite addresses work just like other addresses in your address book. Addresses in your address
book can be marked as favourites to speed up the search for frequently used addresses.

Accessing an Address from Favourites
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap on Favourites

From the resulting list of addresses, tap on the address record you require.

Routing to an Address from Your Favourites List
1.

Access the address record from your Favourites as described in Accessing an Address from
Favourites.

Tap on Route.

Select the Routing Method and tap on the orange Calculate Route button to continue.

Editing an Address from Your Favourites List
1.

Access the address record from your Favourites as described in Accessing an Address from
Favourites.

Tap on Edit.

Use the Edit Address Book screen to modify the name, information or phone numbers. The
street address cannot be changed.

Tap Save when done.

Deleting an Address from Your Favourites List
1.

Access the address record from your Favourites as described in Accessing an Address from
Favourites.

Tap on Delete.

Confirm deletion. Tap Yes.

Creating a New Entry
This is used to create a new address and save it in your address book. You can create an entry by
selecting it on the map, entering the address, selecting an address from the list of POIs or choosing a
street intersection.

Enter Address

Creating a New Entry in Your Address Book by Selecting it on the Map
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap on Create New Entry.

Tap on Select on Map.

The Map screen will be displayed in 2D mode. Use your finger or stylus to pan around the
map. When the crosshair icon is over the location you want to add to your address book, tap
in the centre of the crosshairs. (Note: you may need to zoom into a lower zoom level if the
edit Address Book screen is not displayed.)

Edit the name, information and phone numbers for the location you selected on the map.
Tap the Favourites checkbox if you want this saved as a Favourite address.

Tap Save.

Creating a New Entry in Your Address Book by Entering an Address
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap on Create New Entry.

Tap on Enter Address.

Enter the address following the prompts. Detail on address entry can be found in this
chapter in the Entering an Address section,

Edit the name, information and phone numbers for the location you selected on the map.
Tap the Favourites checkbox if you want this saved as a Favourite address.

Tap Save.

Creating a New Entry in Your Address Book from a POI
1.

From the Main Menu, tap the Enter Address icon.

Tap on the My addresses icon.

Tap on Create New Entry.

Tap on POIs.

Select the category from the list of POI categories.

Enter Address

If a subcategory list is displayed, select ALL Subcategories or one from the list.

Select search criteria:
Near Current Position Displays POIs in the category selected nearest to your current
position. If there are no POIs within a 50 mile radius, the search will be empty and an alert
will be displayed.
Near Town: Enter a town name using the keypad (no QuickSpell) and select the desired town
centre from the resulting list. This will display POIs in the selected category nearest to the
selected town centre.
Near Address: Enter an address using the standard address entry function. This will display
POIs in the selected category nearest to the entered address.

Tap on the desired POI name on the list. Use the Prev and Next buttons to scroll up and
down the list.

Edit the name, information and phone numbers for the selected POI. Tap the Favourites
checkbox if you want this saved as a Favourite address.

10. Tap Save.

Enter Address

Points of Interest (POI)
The Magellan Maestro has preloaded POIs that can be used as a destination for a route. Selecting a
restaurant or finding a petrol station nearby is as simple as tapping the screen.

Categories and Subcategories
POIs are categorised into unique categories from petrol stations to wineries. Most, but not all
categories are further organised into subcategories. Restaurants have, for example, 16 subcategories
that provide a way to search for restaurants serving Chinese food, fast food, or even Swiss food.

Creating a Route to a POI by Category
1.

From the Main Menu, tap the Points of Interest icon.

Select Search by Category.

Use the scroll bars to view the categories
and tap on the desired category name.

Category List

If a subcategory is displayed, use the scroll
bars to view the subcategories and tap on
the desired sub category name. Select ALL
SUBCATEGORIES if you are unsure what
subcategory best suits your needs.

Select the search criteria: Near Current
Position, Near Which Town? (requires
entering a town name) or Near Address
(requires entering an address).
Example of a Restaurant Sub Category List

The top portion of the display shows
detailed information about the highlighted
POI in the list. The arrow and distance
indicates the direction and distance in a
straight line from your current position to
the POI.
Use the Prev and Next buttons to step up
and down the list of POIs that were found.
Tap on the POI name to continue.

Select the route method and tap on the
orange Calculate Route button to begin.

Points of Interest

Restaurants Near Current Position

Creating a Route to a POI by Name
1.

From the Main Menu, tap the Points of Interest icon.

Select Search by Name.

Spell the name of the POI to be used as the
destination. You need not enter the full
name, but the more characters you enter,
the easier it will be to find the exact POI
you are searching for.

Select the search criteria: Near Current
Position, Near Which Town? (requires
entering a town name) or Near Address
(requires entering an address).
Sample Search by Name Input

The top portion of the display shows
detailed information about the highlighted
POI in the list. The arrow and distance
indicates the direction and distance in a
straight line from your current position to
the POI.
Note that searching by name will show all
POIs that meet the name criteria,
regardless of the category. In the sample
shown here, there are home improvement
Search Result for LOWE Near Position
centers (Lowe’s) and parks (Lowell Brandt
Park).
Use the Prev and Next buttons to step up and down the list of POIs that were found. Tap on
the POI name to continue.

Select the route method and tap on the orange Calculate Route button to begin.

Points of Interest

Enhanced POI
Enhanced POIs are points of interest that are user-created using the POI Manager software found on
the CD-ROM. After loading a POI file to an SD / MMC card and loading it in the Magellan Maestro, you
can route to those POIs quickly.

Loading a POI File
1.

Save a POI file created with the POI Manager to an SD/MMC card and install the card in the
SD/MMC slot on the left side of the Magellan Maestro.

From the Main Menu, tap the Points of Interest icon.

Select Enhanced.

Select My POIs.

Select Change My POI file.

Select Select a POI File.

Select the POI file to be loaded from the list of
available POI files by tapping on the file name.

POI File List

Selecting Categories for Display on the Map
A POI file must be loaded (see Loading a POI File) for this function to operate.

From the Main Menu, tap the Points of Interest icon.

Select Enhanced.

Select My POI.

Select Change My POI file.

Select Display Categories.

Use the checkbox to the left of the category name to select or deselect the category.
(Checked means this category will have its icon displayed on the map.)
Tap Mark All to check all categories or Clear All to uncheck all categories.

Tap Save when done.

Points of Interest

Setting Alarms
A POI file must be loaded (see Loading a POI File) for this function to operate. An enhanced POI
can have an alarm that will alert you when you are in a range set by “Alert Parameters.” Note that
all POIs in the selected categories will have their alarms set to on. A POI file must be loaded (see
Loading a POI File) for this function to operate.

From the Main Menu, tap the Points of Interest icon.

Select Enhanced.

Select My POI.

Select Change My POI file.

Select Set Alarms.

Use the checkbox to the left of the category name to select or deselect the category.
(Checked means that this category will have its alarms turned on.)
Tap Mark All to check all categories or Clear All to uncheck all categories.

Tap Save when done.

Setting Alarm Parameters
An enhanced POI can have an alarm that will alert you when you are in a range set by “Alert
Parameters.” Note that all POIs in the selected categories will have their alarms set to on. A POI file
must be loaded (see Loading a POI File) for this function to operate.

From the Main Menu, tap the Points of Interest icon.

Select Enhanced.

Select My POI.

Select Change My POI file.

Select Set Alarms.

Select the category whose alarm parameters you wish to change from the category list.

Set the detection angle, the first warning and the last warning by tapping on the button with
the current setting.

Use the keypad to enter new values and tap OK.

Tap Save when done.

Points of Interest

Routing to an Enhanced POI
A POI file must be loaded (see Loading a POI File) for this function to operate.

From the Main Menu, tap the Points of Interest icon.

Select Enhanced.

Select My POI.

Select Select Category.

Select the category containing the POI you want to route to from the category list.

Select Nearest (near your current position) or Spell POI Name (requires entering the POI
name).

Select the POI to be routed to from the “Select POI” list.

Tap Route.

Select the desired routing method and tap the orange Calculate Route button to continue.

Saving an Enhanced POI to Your Address Book
A POI file must be loaded (see Loading a POI File) for this function to operate.

From the Main Menu, tap the Points of Interest icon.

Select Enhanced.

Select My POI.

Select Select Category.

Select the category containing the POI you want to route to from the category list.

Select Nearest (near your current position) or Spell POI Name (requires entering the POI
name).

Select the POI to be routed to from the “Select POI” list.

Tap Save.

Edit the POI information and tap Save.

10. The Route To This POI screen will be displayed again. Tap on Route to create a route or
Cancel to quit.

Points of Interest

Marco Polo
The Marco Polo Tour Guide is a special feature of the Magellan Maestro that gives users access to a
special set of detailed POIs from Marco Polo Travel Guides.
Magellan is happy to give you free access to the Sightseeing category for capital cities with detailed
information regarding museum and monuments, etc. Other categories are locked and require a
subscription to be viewed. Please visit www.magellanGPS.com for detailed information about
subscribing to Marco Polo points of interest.

Points of Interest

Travelling on a Route
Map Screen
When a route has been calculated it will be displayed
on the Map screen in green with blue arrows
indicating the direction of travel. The top of the
screen displays the name of the street you are on.
The bottom provides information about the next
segment.
The sample to the right shows that the next
manoeuvre will be to turn right in 3.3 miles on
Fairplex Dr. The total distance to the destination is
4.6 miles.

Map Screen with Route Shown

As the route progresses, voice alerts will be used to
prompt you of upcoming segments If you miss a
prompt, or want it repeated, tap on the ‘next segment in xxx km” data field.
There is also a bell that will alert you where the segment is to be performed. (This tone can be
changed in User Options > Tone Options.)

Split-Screen
As you approach a segment, the Magellan Maestro
will display a split-screen alerting you of the
upcoming segment. This screen will close
automatically as the segments gets closer, or you can
tap ESC to close this screen and return to the Map
screen. (This screen can be set to not to be displayed
in User Options > Map Options.)

Split-Screen

List of Directions
The List of Directions displays all of the segments
required in order to complete the route and arrive at
the destination. To view the List of Directions, tap on
the segment icon in the bottom left corner of the
Map screen. (The List of Directions is described in
detail in the Map chapter of this manual.)

List of Directions

Travelling on a Route

You Have Arrived
Finally, the Magellan Maestro will provide a visual
alert when you have arrived at your destination. Tap
the Back arrow to return to the Map screen. (The
Magellan Maestro will automatically return to the
Map screen after a fixed time if you do not tap the
Back arrow.)

You Have Arrived.

Types of Routes
There are a wide variety of methods you can use to create a route. Each method is discussed in the
chapter which is associated with it. Some of the more common methods and the chapters in which
they are described are:
•

A route to a new address (Address)

•

A route to an address in your address book (Street Address)

•

A route to a previous destination(Street Address)

•

A route to a POI preloaded in the Magellan Maestro (Points of Interest)

•

A trip (a route with multiple destinations) (Trip Planner)

•

A route to your home address (Home Address)

Routing Method
Regardless of which route type has been created, the
Magellan Maestro needs to know how the route is to
be calculated. Routes can be calculated by Fastest
Time, Shortest Distance, Least Use of Motorways or
Most Use of Motorways. To select the route method,
tap on the radio button for the desired method.
The Magellan Maestro can be set to avoid toll roads
as much as possible by tapping on the Avoid Toll
Roads checkbox.
The View on Map
button displays the Map
screen with the destination shown. Tap on ESC to
return to the Routing Method screen.

Routing Method

When the route method has been selected and you are ready to begin calculating
the route, tap on the Calculate Route button.
Route Calculate button

Travelling on a Route

Special Routing Functions
When a route is active, the Main Menu functions are changed to support special routing functions.

Routing to a POI Near an Approaching Motorway Exit
Note: This function is available only while on a motorway. Also, when you create a route to a POI
near an exit, the original route will be cancelled. You will need to reset the original route when you
are ready to continue.
1.

From the Map screen, tap MENU.

Tap the POI Near Exit icon.

Tap on the POI icon (restaurant, petrol
station or hotel) for the required exit.

A list of POIs in the selected category that
are near the selected exit will be displayed.

Tap on the POI in the list that you want
routing directions to.

Select the Routing Method and tap the
orange Calculating Route button.

POI Near Exit List

Quitting a Route
1.

From the Map screen, tap MENU.

Tap the Quit Route icon.

Confirm that you want to quit the route. Tap Yes.

Detouring off a Route
1.

From the Map screen, tap MENU.

Tap the Detour icon.

Select the distance to avoid (3 mi, 5 mi, 10 mi or Custom) that will be used to calculate the
route and then return toy to your original route.

Tap Route.

The detour will be calculated using the same routing method that was used to create the
route.

Travelling on a Route

Changing the Route Method
If you travel off the computed route, the Magellan Maestro will automatically re-calculate the
routing information to get you to your original destination using the routing method you selected
when creating the route. However, if you want to change the routing method (while on or off the
route), you will need to use the re-route function.
1.

From the Map screen, tap MENU.

Tap the Reroute icon.

Select the desired routing method and tap the orange Calculate Route button.

Travelling on a Route

Trip Planner
The Trip Planner is used to create a route with multiple destinations. In this document we will refer to
a route with multiple destinations as a “Trip”.

Creating a Trip
1.

From page 2 of the Main Menu, tap the Trip Planner icon.

Select New from the Trip Planner Menu.

Use the keypad to enter a name for this trip.

Tap OK.

Enter a Trip Name

Begin by adding the first destination in the
trip. Tap Add.

Select the method to be used to find or
create the destination icon: Enter Address,
Address Book, POIs, or Junction.

Follow the instructions for the method
chosen to select the destination.
See the chapters on Enter Address and POI
for help in selecting destinations.

Tap add to begin

When the destination is found the Add
Address to Trip screen will be displayed.
Tap Save.

Tap Save to Add the Address

Trip Planner

The list of trip destinations will be
displayed.

First Destination Added

10. Tap on the destination name to bring up the
menu.

11. Repeat steps 5 to 9 until the trip is
complete with all your desired destinations.

Tap to open menu.

12. Tap Save.

Saving completed trip.

Optimising a Trip
While creating a trip or editing a trip you can optimise the order of the destinations but using the
Optimise button.
1.

View the trip list, either while creating the trip or from the Edit button when selecting Trip
Planner.

Tap Optimise.

Select Save to store the changes to the trip.

Trip Planner

Starting a Trip
1.

From page 2 of the Main Menu, tap the Trip Planner icon.

Select Guide Me from the Trip Planner Menu.

Select the trip to be used from the stored trips list.

Tap on the destination in the list to be used
as the first destination in the trip.

Select the routing method to be used and
tap the orange Calculate Route button.

Select first destination.

Editing a Trip
1.

From page 2 of the Main Menu, tap the Trip Planner icon.

Select Edit from the Trip Planner Menu.

Select the trip to be edited from the stored trips list.

Tap on the destination to be edited. You
can:
Add a destination after the selected one.
Move the destination up in the list.
Move the destination down in the list.
Delete the destination from the trip.

Trip Planner

When the trip has been edited, tap Save.

Edit Trip

Deleting a Trip
1.

From page 2 of the Main Menu, tap the Trip Planner icon.

Select Delete, Rename from the Trip Planner Menu.

Tap Delete.

Select the trip to be deleted from the stored trips list.

Confirm that you want to delete the trip. Tap Yes.

Renaming a Trip
1.

From page 2 of the Main Menu, tap the Trip Planner icon.

Select Delete, Rename from the Trip Planner Menu.

Tap Rename.

Select the trip to be renamed from the stored trips list.

Use the keypad to edit the name of the trip.

Tap OK.

Trip Planner

Exit POIs
The POI Near Exit function provides a way of accessing commonly used POIs that are near an exit you
are approaching while travelling on a motorway. POI near exit include restaurants, petrol stations and
hotels. POI near Exit can be accessed while following a route or just driving without a route, as long as
you are on a motorway.

Routing to a POI Near an Approaching Motorway Exit
Note: This function is available only while on a motorway. Also, when you create a route to a POI
near an exit, the original route will be cancelled if you are following a route. You will need to reset
the original route when you are ready to continue.
1.

From the Map screen, tap MENU.

Tap the POI Near Exit icon.

Tap on the POI icon (restaurant, petrol
station or hotel) for the required exit.

POI Near Exit List

A list of POIs in the selected category that
are near the selected exit will be displayed.

Tap on the POI in the list that you want
routing directions to.

Select the Routing Method and tap the
orange Calculating Route button.

Sample List of Automotive POIs

Exit POIs

Roadside Assistance
Overview
Touching the tow truck icon displays the list of all the Points of Interest listed in the Auto Service and
Maintenance category that are close to your current position.

Accessing Roadside Assistance
1

From the Main Menu, tap on the tow truck
icon.

Tap on the tow truck to access
Roadside Assistance.

The list of garages close to your current
position is displayed with contact
information. If you have a Bluetooth mobile
phone paired to your Maestro (see the
Bluetooth chapter) just touch the telephone
number to call.

Tap on the telephone number to call using
your Bluetooth mobile phone.

Knowing your current position
If you need assistance when travelling, it is likely
that you will have to know your exact position to
efficiently direct the assistance or emergency
services.
To find your exact position, tap the upper left
corner of the Map screen.
The Locate screen will display detailed information
about your current position, including the next and
previous intersection.
Note that you can save your current position in your
address book (see the Map Screen chapter for more
information about the Locate screen).

Roadside Assistance

Tap the Save button to store your current
position in your address book.

Bluetooth
Introduction
The Bluetooth function of the Magellan Maestro allows you to use the Magellan Maestro as a handsfree device for a Bluetooth enabled mobile phone. You can answer and dial your phone by using the
Magellan Maestro touchscreen..

Accessing the Bluetooth Main Menu
1.

From the Main Menu screen, tap

Pairing Mode

Bluetooth Main Menu

If this is the first time the feature has been used and no mobile phone has been paired or connected,
the system will automatically switch to “Pairing Mode” and will wait for you to pair your mobile
phone.
To pair a new phone, or if the automatic pairing process was cancelled the first time it was used, you
must pair the phone with the Magellan Maestro before the Bluetooth function can be used.

Pairing a Phone with the Magellan Maestro
1.

Access the Bluetooth Main Menu.

Tap on the Pair with a Device icon.

The pairing search screen will be displayed.
Pairing will fail if the process cannot be
completed within 1 minute.

To pair your mobile phone, please consult
the user manual for your mobile phone.
During the pairing process for your mobile
phone you will be asked to input a passkey.
You can enter any combination of numbers
but 1111 is recommended.

Bluetooth

Pairing Search

A passkey input window will pop up on your
Magellan Maestro. In this popup window,
you will need to input the same numbers as
you entered into your mobile phone..

Passkey Request screen

Establish Connection
Once paired, you will still need to establish a connection with the mobile phone if the message “No
paired phone connected” appears at the bottom of the Bluetooth Main Menu screen.
If your mobile phone doesn’t support “Hands-free” services and just supports the “Headset” service,
you needn’t connect. If you dial a number from your mobile phone or receive an incoming call the
“Headset” service will connect automatically. The main interface will display a status message "xx
connected, partial function supported only",

Establishing a Bluetooth Connection
1.

Access the Bluetooth Main Menu.

Tap the Search for Devices icon.

The Searching for devices screen will appear. Once a device has been found, it will return to
the Bluetooth Main Menu with a message at the bottom of the screen indicating that a
device is connected.

Place a call
Placing a Call
1.

Access the Bluetooth Main Menu.

Tap the Call icon.
•

You can enter 13 characters: “0~9”, *
and # with the buttons on the keypads.
Input “+” by pressing * for about 1
second.

•

You can tap
to delete the phone
number you have entered. Press the
button for about half a second and the
entire row will be deleted.

•

Bluetooth

Once you have entered the phone number you want to dial, tap

Call screen

to place the call.

Placing a Call Using the Address Book
1.

Access the Bluetooth Main Menu.

Tap the Call icon.

Select the search criteria; List All or Search Address Book.

After searching or listing your entire address book, select the address from the displayed list.

If there is a phone number recorded for the address “w:” (work), “h:” (home) or “m:”
(mobile) will appear as a button. Tap the desired button and the call will be initiated.

Placing a Call Using Call History
The “Call History” window displays a list of Incoming / Outgoing / Missed. calls.
1.

Access the Bluetooth Main Menu.

Tap the Call History icon.

Select the type of calls to be displayed.
Incoming Calls
Outgoing Calls
Missed Calls
Call screen

Tap

to call back.

to delete a selected record. Tap

to delete all records on the page.

Placing a Call Using Redial
1.

Access the Bluetooth Main Menu.

Tap the Redial icon.

Failed Call
If a call fails due to network problems or other unknown reasons, the “Dialling Failed” window will
pop up:
• Tap

to redial.

• Tap

to cancel dial.

Bluetooth

Call Connected
If a call connects, the “Connected” window will pop
up:
• Tap

to display a keypad to enter the

extension after you have been connected.
• Tap

to transfer the call to your mobile

phone.
• Tap

to turn off the microphone in the

Connected screen

Magellan Maestro.
• Tap

to end the call.

Incoming call
Answering an Incoming Call
1.

When there is an incoming call, the
“Incoming Call” window will pop up:
Tap

to answer the incoming call.

Tap

to mute the incoming call ring.

Tap

to reject the incoming call.
Incoming Call

Bluetooth

Setting User Options
Use User Options to customize the Magellan Maestro to better suit your needs from a GPS navigator.
Tapping the Back arrow from any of the User Option screens will cancel the changes.

Selecting Destination Country
Choose the country you will be travelling in.

From page 2 of the Main Menu, tap User Options.

Tap Destination Country.

Tap on the desired country.

Accessing System Settings
Commonly used settings are found in the System Settings section of User Options.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Checking Battery Life
1.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

The battery life indicator is found at the bottom of the screen. All green indicates a full
battery life.

Adjusting the Volume
Volume can also be adjusted by tapping on the speaker icon on the Map screen.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap Volume.

Tap along the adjustment bar to increase or decrease the speaker volume.

Tap Mute to turn the speaker off. Tap Mute again to turn the speaker back on.

Tap Save.

Setting User Options

Adjusting the Display Brightness
1.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap Brightness.

Tap along the adjustment bar to increase or decrease the display brightness.

Tap On-battery dimming (75%) to set it on or off. (Checked is on.) If checked, battery life
will be saved when operating the Magellan Maestro without external power.

Tap Save.

Setting Auto Power Off Time
The auto power setting will define the time that the Magellan Maestro will automatically turn off if it
hasn’t moved or the touchscreen hasn’t been accessed.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap Power.

Select Never, 10 Minutes, 20 Minutes or 30 Minutes.

Tap Save.

Setting Time Zone
1.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap Time Zone.

Use the “-” and “+” buttons to step through the time zones until the time zone for your area
is displayed.

Check Daylight Savings if daylight saving is in effect for your time zone. (Daylight saving is
not automatically adjusted.)

Tap Save.

Setting User Options

Selecting Units of Measure
1.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap Units of Measure.

Select Miles/Feet or Kilometers/Meters.

Tap Save.

Displaying Contact Us Information
1.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap

Tap Contact Us.

Tap Back arrow.

Displaying Product Information
1.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap Next.

Tap Product Information.

Tap Next to view additional product information.
Tap Prev to return to page 1.

Tap the Back arrow to exit.

Setting User Options

Performing Diagnostics
1.

From page 2 of the Main Menu, tap User Options.

Tap System Settings.

Tap Next.

Tap Diagnostics.

Tap Audio Test, Touchscreen Test or Video Test.

When done, tap the Back arrow to exit.

Accessing the Trip Computer
The trip computer records your average speed, the time in hours of the trip, the time in hours that
you were driving, and the distance of the trip. This information can be saved to a file for easy access
when the information is needed.

From page 2 of the Main Menu, tap User Options.

Tap Trip Computer.

Select the Current Trip or a Saved Trip from
the list.

Select Stop to stop recording information.
Select Reset to set all the information to
zero. Select Reset when you are starting a
trip or route that you want to record details
for.

Current Trip Computer

Select Save to save the trip computer
information to a file. You will be prompted
to enter a name for the file. Enter a name and tap OK.
5.

Tap the Back arrow to exit.

Setting User Options

Selecting POIs to be Displayed on the Map
In some areas the map can be cluttered with POIs, making it difficult to find what you are looking
for. Use POI Selection to set which categories of icons will be shown and which will be hidden.

From page 2 of the Main Menu, tap User Options.

Tap POI Selection.

Tap on the POI category in the list to toggle
its display setting on or off. (Checked POIs
will be displayed.
Tap Mark All to check all POI categories.
Tap Clear All to uncheck all POI categories.

Tap Save to save changes and exit.
POI Selection Screen

Deleting Addresses from the Address Book (Global)
The chapter on addresses discusses how to delete individual addresses from the address book.
Address Book Options provides a way of globally deleting addresses from the address book.

From page 2 of the Main Menu, tap User Options.

Tap Address Book Options.

Tap Clear Addresses to delete all of the addresses in your Address Book.
Tap Clear Favourites to delete only those addresses marked as Favourites from your Address
Book.
Tap Clear Previous to delete previous destinations from the Address Book.

Tap the Back arrow to exit.

Setting the Map in 3D or 2D Mode
See the chapter on Maps for information regarding 3D and 2D map modes.

From page 2 of the Main Menu, tap User Options.

Tap Map Options.

Select 3D Map or 2D Map.

Tap Save to record the changes and exit.

Setting User Options

Setting the Map Display to Heading Up or North Up
The map can be displayed with the top of the display in the direction of your heading or North.

From page 2 of the Main Menu, tap User Options.

Tap Map Options.

Select Heading Up or North Up. (Note that ‘North Up’ is only available when the map is set
to 2D mode.)

Tap Save to record the changes and exit.

Setting Split Screen (TrueView™) Options
As you approach a segment, the display will change to the split screen mode. Under Map Options
you can turn off the split screen or set it to be just the TrueView portion of the split screen.

From page 2 of the Main Menu, tap User Options.

Tap Map Options.

Tap Auto TrueView to set it to on or off. (Checked is on and the TrueView image will be
displayed.)

Tap Split TrueView to set the TrueView display to split or single view. (Checked sets split
screen on.)

TrueView Split Screen

TrueView Single Screen

Tap Save to record the changes and exit.

Setting User Options

Setting Auto Night Map Display
Normally the map is displayed in pastel colours for daytime use and a black background for
nighttime use. Unchecking the Auto Night Mode will keep the map display that uses pastel colours.

From page 2 of the Main Menu, tap User Options.

Tap Map Options.

Tap on Auto Night Mode. (Checked indicates that the map will automatically change to night
colours; unchecked and the map will always use the day colours.) Note: If the screen has
already switched to night colours, unchecking the box will not cause the display to switch to
the day colours. The switch to day colours will occur the following morning and then stay in
the day colour mode.)

Tap Save to record the changes and exit.

Setting Detour Options
Normally the map is displayed in pastel colours for daytime use and a black background for
nighttime use. Unchecking the Auto Night Mode will keep the map display that uses pastel colours.

From page 2 of the Main Menu, tap User Options.

Tap Detour Options.

Select the default for the distance to be
used to detour around traffic problems
while routing.
Set the alert timer. (Enter the time using
the keypad.)
Check Enable automatic detour on or off.
(Checked is on and the Magellan Maestro
will automatically offer detour routing you
when it registers that you are stuck in slow
or stationary traffic situations.)

Detour Options Screen

Tap Save to record the changes and exit.

Setting User Options

Using the Simulator
When turned on, the simulator will offer the option of simulating movement on a route. Useful for
learning about the Magellan Maestro while not driving.

From page 2 of the Main Menu, tap User Options.

Tap Simulator Mode.

Tap Propose simulator mode when calculating
route. When checked, the Magellan Maestro will
ask if you want the route simulated when it is
created. Simulation mode will ignore actual
movement and should only be used for training
purposes.
Tap on the desired speed factor.
Tap <<1mi or 1mi>> to move the route forwards
or backwards 1 mile.

Simulator Mode Screen

Tap Restart to restart the route you are currently
simulating from the beginning.
Tap Stop stop the current route simulation.
(The Simulate button is currently not active.)
4.

Tap Back arrow to record the changes and exit.

Setting Tone Options
Provides a way of selecting the tone used to announce arrival at a segment or destination.

From page 2 of the Main Menu, tap User Options.

Tap Tone Options.

Select Bell, Chime or Beep.

Tap Save to record the changes and exit.

Setting User Options

Viewing Technical GPS Information
This screen provides technical information about the satellites being used to compute the GPS
position.

From page 2 of the Main Menu, tap User Options.

Tap GPS Options.

Tap GPS Status.
PRN: pseudo random number that identifies
the satellite
AZ: Azimuth of the satellite
EL: Satellite elevation
SNR: Satellite signal-to-noise ratio
TTFF: Time to First Fix (in seconds)

Tap Back arrow to exit.

Setting the GPS Position
Setting a GPS position is useful if you are not obtaining satellite information quickly because the
Magellan Maestro has travelled over 500 miles while turned off. Setting the GPS position will allow
the Magellan Maestro to compute which satellites are available and calculate the position more
quickly.

From page 2 of the Main Menu, tap User Options.

Tap GPS Options.

Tap Set GPS Position.

Follow the prompts to enter your current address.

Tap Done when you have finished entering the address.

Backing Up and Restoring Data
Backup and restore provides a way of storing the address book and other data to a SD/MMC card.
When the data has been backed up, it can be restored at any time. Please note that when you
restore from backed up data, address book and other data will be replaced with the data. The
Magellan Maestro cannot append backed up data to your existing data.

Setting User Options

Backing Up Data
1.

From page 2 of the Main Menu, tap User Options.

Insert a SD or MMC card with available space into the SD slot on the Magellan Maestro.
Note that backing up data will overwrite any back up files on the SD or MMC card.

Tap Backup and Restore.

Tap Backup.

Confirm backup. Tap Yes.

Operation successful! Tap OK.

Tap Back arrow to exit.

Restoring Data
1.

From page 2 of the Main Menu, tap User Options.

Insert a SD or MMC card with available space into the SD slot on the Magellan Maestro.
Note that backing up data will overwrite any back up files on the SD or MMC card.

Tap Backup and Restore.

Tap Restore.

Confirm restore. Tap Yes.

Operation successful! Tap OK.

Tap Back arrow to exit.

Viewing Map Information
1.

From page 2 of the Main Menu, tap User Options.

Tap Map Information.

Tap Back arrow to exit.

Map Information Screen

Setting User Options

Premium POI Subscription
Your Magellan Maestro is preloaded with points of interest from Marco Polo travel guides. The
Sightseeing category can be accessed free of charge for capital cities, but a subscription is required
to access the other categories of Marco Polo POIs. To subscribe to Marco Polo Premium POIs, visit
www.magellanGPS.com.
1.

From page 2 of the Main Menu, tap User Options.

Tap Premium POI Subscription to display a screen showing your current subscriptions to
Premium POIs.

Tap New to enter a new subscription code to Marco Polo Premium POIs. Subscription codes
can be purchased from www.magellanGPS.com.

Tap Back arrow to exit.

Setting User Options

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2008:05:06 15:15:43-07:00
Create Date                     : 2008:05:06 14:48:36Z
Metadata Date                   : 2008:05:06 15:15:43-07:00
Format                          : application/pdf
Title                           : 604-0093-001 A UM 4245.book
Creator                         : jjones
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:5f6bfa1b-fcdc-4c17-ae38-4638a311c202
Instance ID                     : uuid:6f662aaf-9673-4880-a1e9-48a3c8744122
Page Count                      : 70
Author                          : jjones

EXIF Metadata provided by EXIF.tools

Magellan Maestro 4245 Users Manual 604 0093 001 A UM

4245 to the manual 03d3d689-cbbb-4841-9021-b9511688de30

Navigation menu

Versions of this User Manual:

Views

Navigation