Magna Electronics NB24G175V2 Automotive Radar User Manual Click here and type date
Autoliv ASP, Inc. Automotive Radar Click here and type date
User Manual Info

Autoliv ASP, Inc. 
Autoliv Electronics America  
26545 American Drive 
Southfield, Michigan  48034 
USA 
The device under test is manufactured by the grantee (Autoliv ASP, Inc.), and sold as an OEM product.  
Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all 
applicable / appropriate operating instructions. When end-user instructions are required, as in the case of 
this product, the grantee must notify the OEM to notify the end-user.  
Autoliv ASP, Inc. will supply this document to the reseller/distributor dictating what must be included in the 
end user’s manual for the commercial product.  
 INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL 
The following information (in blue) must be included in the end-product user’s manual to ensure 
continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in 
the manual if the device label is not readily accessible to the end user. The compliance paragraphs 
below must be included in the user's manual. 
****************************************************************************** 
FCC ID: WU8NB24G175V2    CANADA 310 
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSSs. 
Operation is subject to the following two conditions: 
1. This device may not cause harmful interference, and 
2. This device must accept any interference received, including interference that may cause 
undesired operation. 
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 
1. L’appareil ne doit pas produire de brouillage; 
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 
susceptible d’en compromettre le fonctionnement. 
Note: Changes or modifications not expressly approved by the party responsible for compliance could 
void the user's authority to operate the equipment.