Maniway Electronics MW-1361 BLUETOOTH SPEAKER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2224128
Application ID	tySUymP4J6HrpVEhTh4KYQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.85kB (298081 bits)
Date Submitted	2014-03-24 00:00:00
Date Available	2014-03-25 00:00:00
Creation Date	2014-03-20 10:53:05
Producing Software	Acrobat Elements 7.0.5 (Windows)
Document Lastmod	2014-03-20 10:54:30
Document Title	Microsoft Word - User Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

BRAND
Portable Bluetooth Speaker
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model No. :MW-1361
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed
and manufactured to ensure your personal safety. However,
improper use can result in potential electrical shock or fire
hazards. Please read all safety and operating instructions
carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings
listed in these instructions and on the unit.
Water and Moisture
The unit should not be used near water or wet space. Such as
bathtub, washbowl, kitchen sink, laundry tub, swimming pool or
basement.
Ventilation
The unit should be situated in the location or position which
places won’t interfere its proper ventilation. For example, it
should not be situated on a bed, sofa, rug or similar surface that
may block the ventilation openings. Also, it should not be placed
in a built-in installation, such as a bookcase or cabinet, which
may impede the flow of air through the ventilation openings.
Heat
The unit should be situated away from heat sources such as
radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
Power Source
The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. It is always
best to have a clear area from where the cord exits the unit to where it is
plugged into an AC wall outlet.
Cleaning
The unit should be cleaned only as recommended. See the
section « Care and Maintenance » of this manual for cleaning
instructions.
Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product,
Lightning and Power Surge Protection
Unplug the unit from the wall outlet. This will prevent damage to the
product due to lightning and power-line surges.
Overloading
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire of electric shock.
Damage Requiring Service
This unit should be serviced by qualified service personnel
when:
Objects have fallen into or liquid has been spilled into the
enclosure.
The unit has been exposed to rain.
The unit has been dropped or the enclosure damaged.
The unit exhibits a marked change in performance or does not
operate normally.
Periods of Nonuse
If the unit is to be left unused for an intended period of time, such
as a week or longer, the power cord should be unplugged from the
unit to prevent damage or corrosion.
Servicing
The user should not attempt to service the unit beyond those
methods described in the user’s operating instructions.
Service methods not covered in the operating instructions
should be referred to qualified service personnel.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING:
- Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
- To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be
exposed to dripping or splashing and that objects filled with
liquids, such as vases, shall not be placed on apparatus.
- The mains plug is used as disconnect device, the disconnect
device shall remain readily operable.
LOCATION OF CONTROLS
Top View
Back View
1. M (MODE) Button
.To select different play modes: Bluetooth/FM/USB/Aux
2. Button
z In Bluetooth or USB mode : Tap this button once to return
to the beginning of current track or previous track.
z In FM mode:
.Press and hold this button to auto search and
automatically save up all the stations with strong signals in
sequence. It will automatically play the No. 1 station saved
once the auto searching is finished.
.Tap this button continuously to manually tune to desired
station.
3. Play/Pause
(On/Off) button
Š Press and hold this button to turn the unit On or Off.
Š In Bluetooth or USB playback mode: to play/ pause current
playback
Š In Bluetooth mode: when receiving an incoming call on your
cell phone, tap this button once to answer the phone, tap
this button again to end the call or ignore the incoming call.
Š In FM mode: to select the preset stations in sequence
4.
Button
z In Bluetooth or USB mode : Tap this button once to to
advance to the next track.
z In FM mode:
.Press and hold this button to auto search and
automatically save up all the stations with strong signals in
sequence. It will automatically play the No. 1 station saved
once the auto searching is finished.
.Tap this button continuously to manually tune to desired
station.
5. -Button
Press this button to adjust volume level down.
6. + Button
z Press this button to adjust volume level up
7.
8.
Built-in Microphone
LED Display
9.
Battery Status Indicator (Green color)
z Rapid flashing =low battery
‹
While charging :
z Flashing =charging
z Steady Green= full charged
10. Telescopic Antenna
11. Aux-In Jack
12. USB port
13. AC Socket
POWER SOURCES
Power Supply
This unit is designed to operate on AC 100-240V～50/60 Hz household
mains supply or the built-in rechargeable Li-ion battery.
Connect To AC Power
Before using this new Wireless speaker the first time, you
should connect it to AC (mains) power.
1.Plug the connector of AC cord into the AC socket on the back
of the speaker unit.
2. Plug the AC cord plug into a convenient AC wall outlet.
3. The green color battery charging indicator will light up &
charging begins.
Button to turn on the unit, the LED
3. Press and hold the
display will light up.
4. Press and hold the
Button again to turn off the unit.
5.Remove the AC cord out of the wall outlet if you want to switch
off the main voltage completely.
OPERATING THE SPEAKER IN BLUETOOTH MODE
Bluetooth involves a technology for wireless radio connection of
devices over a short distance. Devices with Bluetooth standard
are transmitting between 2.402 and 2.480 GHz in the ISM band
(Industrial, Scientific and Medical). Interference can be caused,
for example by WLAN-networks, DAB radios, cordless phones,
or microwave ovens which work on the
same frequency band.
z This speaker offers you the possibility to use a Bluetooth
enabled device. The functional radius is limited to approx.10
metres depending on the surroundings and the unit used.
z If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred
between the playing device (source) and the receiving
device.
z
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Pairing (Linking) A Bluetooth Enabled Cell Phone Or Other
Bluetooth Enabled Device To The Speaker
If the speaker has never been paired with a Bluetooth device
before . You need to follow the pairing instructions below to link
the speaker with your Bluetooth device .
1. When the speaker turned on, press the “M” button repeatedly,
until “bLUE” is shown on the display. The “bLUE” symbol
flashes to show that the speaker is ready to pair (link) with
your Bluetooth device .
2. Activate Bluetooth on the compatible device, and set it to
search for compatible devices.
3. Select the speaker name:”MW-1361” from the list of found
devices.
Tips: Only one playback unit can be connected to the speaker.
If the speaker is already connected to another playback unit, the
speaker will not appear in the BT selection list.
4. If your device asks for a passkey (depending on the device
manufacturers, model, and software version), then enter
digits “0000”(four zeros) and press OK.
If pairing has been carried out successfully, a beep sound is
heard, meanwhile, the “bLUE” symbol stops flashing.
If the speaker has ever been paired with a Bluetooth device
before. You need to follow the pairing instructions below to
link the speaker with your Bluetooth device .
1. After turning on the speaker, the speaker will search for the
last paired device. If the unit finds the paired Bluetooth device,
a beep sound is heard and The “bLUE”symbol stop
flashing .
2. After successfully pairing (linking) , you can begin playing
music from your Bluetooth device wirelessly to the speaker .
3. Press the + / - button on the speaker to adjust to the desired
volume level .
4. To stop the unit, press and hold the Play/Pause on main unit
to turn off the device.
Using The Speaker as a Handfree Bluetooth Speakerphone
1. Link your cell phone to the speaker via Bluetooth as
described above .
2. When receiving an incoming call on your cell phone , tap
button on the speaker to switch the incoming call from cell
phone to the speaker. A short beep sound will be heard
confirming the call was answered. Complete your call using
the built-in microphone and speaker.
3. Adjust the volume control of your cell phone to obtain the
desired sound level.
button again, a short beep
4. To end the call, just tap the
sound will be heard and the call will end. If you were playing
music from your cell phone to the speaker before answering
the call, the music will automatically resume playing when
you hang up.
LISTENING TO FM RADIO
Extend the Antenna
Extend the telescopic antenna fully and adjust the angel of
antenna for best reception.
Tuning and Playing the Radio
1. Press M button until the FM frequency appears on the display
to enter FM Radio mode.
2. Press and hold the “ ” or “ ” button until the frequency
digits on display begins to scan then release the button, the
unit will auto search from low-end frequency toward high-end
frequency and automatically save up all the stations with
strong signals in sequence. It will automatically play the No.
1 station saved once the auto searching is finished.
button to select the preset station in sequence
3. Press the
4. Press the “ ” or “ ” button to manually tune to desired
station.
Notes:
-Manual tune to select weaker stations that might be by skipped
during automatic tuning
-If the automatic tuning does not stop on the exact frequency of
the station, for example, it stops on 100.8MHz instead of
10
100.6MHz, press the “ ” or “ ” button to fine tune to the
exact frequency of the desired station.
USB port
This device has been developed in line with the latest technical
advances in the USB filed. The wide range of different USB
storage devices of all types which are currently on the market,
unfortunately do not allow us to guarantee full compatibility with
all USB storage devices. For this reason, in rare cases there
may be problems in playing back files from USB storage devices.
This is not a malfunction of the device.
1.
Press the M button repeatedly, until “USb” is shown on the
display to enter into the USB mode.
2. Connect a USB storage device directly into the port, after a
few seconds, it will start music playback automatically.
3. Press “+” or “-” button to raise up/lower the volume level.
” button to skip to next track or press “
”
4. Press “
button to the previous track.
NOTE:
• The USB port is also designed for charging external devices
during any mode other than USB mode.
OPERATING THE SPEAKER IN AUX-IN MODE
If you are using an iPod, MP3/MP4 player or other mobile phone
which can not connect this unit via bluetooth directly, you can
still play it on the speaker via an audio connecting cable.
11
1. Plug one end of the 3.5mm audio cable (included) into the
headphone or line out jack on your player, plug the other end
of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Press M Button until “ AUH” shows up in the display to enter
the AUX-IN mode.
4. The volume level can now be controlled through the main unit.
Operate all other functions on the external device as usual.
Notes:
1). If you're connected to the Line out Jack of your external
device, then you only need to adjust the volume control of this
speaker. If you're connected to the Headphone Jack of your
external device, then you may need to adjust both the volume
control of your external device and the volume control of this unit
to find the most desirable volume setting.
button to turn off the unit when you
2) Press and hold the
finish listening.
Don't forget to turn off the power of your external device as well.
OPERATING ON BATTERY POWER
A fully charged battery provides approximately three hours of
use at maximum volume. The rate of battery discharge varies
with the volume setting. You can extend the battery playback
time by reducing the volume.
Battery Status Indicator
The battery status indicator is normally off to conserve battery
power. When the internal battery capacity is very low, the
12
battery Indicator will rapidly flash to alert you to recharge the
internal battery as soon as possible.
Charging The Battery For First Time
Charge the built-in Li-ion battery a minimum of 4 hours prior to
first use.
1.) Plug the unit into the AC wall outlet using the included AC
cord.
2.) The battery charging indicator flashes while charging and it
stops flashing when the unit is fully charged.
Unplug the AC cord from the AC wall outlet once the battery is
fully charged.
Notes:
1. Charging time will vary if you are listening to music while
charging the internal battery.
2. To prolong the life of a rechargeable battery, it is
recommended to completely discharge it before fully charging
it again .
3. Rechargeable batteries need to be cycled for maximum
performance and longer battery life. If you don't use the player
that often, be sure to recharge the battery at least once a
month in order to keep the internal battery working properly.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
13
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger's
voltage and current settings are correct for the battery pack
being charged.
Charge batteries on a fireproof surface and away from
flammable items or liquids. Batteries should NEVER be left
unattended while charging. Only adults should charge the
batteries.
Unplug the power cord when the battery is fully charged or not in
use.
CARE AND MAINTENANCE
‹
Do not subject the unit to excessive force, shock, dust or
extreme temperature.
‹
Do not tamper the internal components of the unit.
‹
Clean the unit with a damp (never wet) cloth except metal
contact or speaker grille, Solvent or detergent should never
be used.
‹
Avoid leaving your unit in hot, humid or dusty places.
‹
Keep your unit away from heating appliances and sources of
electrical noise such as fluorescent lamps or motors.
‹
Always keep your finger dry and clear before touching all the
buttons.
‹
Do not dispose of batteries in fire, batteries may explode or
leak.
14
Troubleshooting Guide
Should you experience difficulties in the use of this player,
please refer to the following chart.
Fault
Unit cannot be
operated.
No Charging
NO Sound
No audio signal
via the Bluetooth
connection
Cause
Unit crashes and
“hangs”.
Wall outlet is not
functioning.
The
battery is
dead.
The speaker is not
linked with the cell
phone.
Volume set too
low.
Speaker is not
paired to the audio
source.
Volume too low
15
Solution
Disconnect
from
the
mains for around 5
seconds.Then switch the
unit on again.
Plug another device into
the same outlet to confirm
the outlet is working.
Recharge the battery.
Go through “Speaker
Operations” process to
link the speaker.
Increase the volume of
your device.
Check
whether
connection
exists.
If
necessary,
pair
the
speaker again to the
audio source.
Increase the volume on
the speaker
Increase the volume on
the audio source.
Pairing does not
work
Speaker cannot
be connected
Poor sound
quality
from a
Bluetooth®
device
Radio
interference.
Audio source
is switched off
Bluetooth
is
switched off at the
audio source.
Bluetooth version
is not supported.
Bluetooth device
is almost out of
range of
the
MW-1361
Too close to a
radio tower.
Check whether the audio
source supports the A2DP
protocol
Switch on the audio
source
Switch on the Bluetooth
function in the audio
source.
Use a different playback
unit.
Move your Bluetooth
device closer to the
MW-1361
Move your speakers to
see if the interference
goes away.
SPECIFICATIONS
Power supply:
AC100-240V~50/60Hz
USB output:
DC 5V 1A
Battery capacity:
7.4V 1800mAH
Power Consumption:
35W
FM Frequency Range：
87.5-108MHz
Working Temperature:
0℃ - 40℃
Working Humidity：
20%-80%
The right to make technical and design modifications in the
course of Continuous product development remains reserved.
16
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Elements 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:03:20 10:54:30+08:00
Create Date                     : 2014:03:20 10:53:05+08:00
Metadata Date                   : 2014:03:20 10:54:30+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.doc
Creator                         : Administrator
Document ID                     : uuid:e67b5554-6038-49bf-a67c-3173e05059f5
Instance ID                     : uuid:e9772219-d23c-4759-ada7-208c09cf364a
Has XFA                         : No
Page Count                      : 18
Author                          : Administrator

EXIF Metadata provided by EXIF.tools