45441 BLH 200SRX DX6i Addendum BLH2000 EN
User Manual: Manual Blade 200 SR X RTF RC Fixed-Pitch Helicopter with SAFE | Horizon Hobby
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
D DX6i Transmitter Setup / DX6i Sender Einstellungen / DX6i Configuration Émetteur / DX6i Impostazioni Trasmettitore D EN Transmitter DX6i Model Type Acro Setup / Channel Assignments Reversing Setup Travel Adj: GEAR POS (0) GEAR: ↑100%; GEAR/F MODE POS (1) GEAR: ↓48% FLAPS: Norm ←↑100; LAND ↓100 MIX 1: ACT; GEAR → GEAR ACT RATE D 0%; U + 100% SW MIX TRIM INH THRO-N ELEV-N GEAR-R AILE-N RUDD-N FLAP-N Flight Modes Panic / Recovery High Dual Rates Rate Low Rate Other Settings GEAR 0; Mix 0 = Beginner GEAR 1; Mix 0 = Intermediate FLAP Position 0 = OFF ELEV-AIL D/R 100% FLAP Position 1 = Panic 70% Timer Down, 08:00 GEAR 1; Mix 1 = Experienced Panic Recovery To use the Panic Recovery feature of the 200 SR X with the DX6i: • Move the throttle to 50% and return all other transmitter controls to neutral for the quickest recovery. If you get into distress while flying in any mode, set the FLAP Switch to Position 1 and move the control sticks to their neutral position. The SAFE™ technology will return the aircraft to a stable attitude, if the aircraft is at a sufficient height with no obstacles in its path. When the helicopter returns to level flight, set the FLAP Switch back to Position 0 to turn off Panic Recovery and return to the current flight mode. DE ModellSender typ Kanalzuordnung DX6i Weg Einstellung: GEAR POS (0) GEAR: ↑100%; GEAR/F MODE POS (1) GEAR: ↓48% FLAPS: Norm ←↑100; LAND ↓100 MIX 1: ACT; GEAR → GEAR ACT RATE D 0%; U + 100% SW MIX TRIM INH Acro High Dual Rates Rate Reverseeinstellung Flug Mode Panikschalter THRO-N ELEV-N GEAR-R AILE-N RUDD-N FLAP-N FLAP Position 0 = OFF ELEV-AIL D/R 100% FLAP Position 1 = Panik Low Rate Weitere Einstellungen 70% Stopuhr Down, 08:00 GEAR 0; Mix 0 = Anfänger GEAR 1; Mix 0 = Fortgeschrittener GEAR 1; Mix 1 = Experte Panikschalter Um die Rettungsfunktion mit dem Panikschalter auf der DX6i zu nutzen: • Stellen Sie das Gas auf 50 % und bringen für die schnellste Wiederherstellung einer normalen Fluglage alle anderen Kontrollen auf ihre Neutralposition. Sollte während des Fliegens in einem beliebigen Mode ein Problem auftreten, schalten Sie den Klappenschalter (FLAP) auf Position 1 und bewegen die Steuerknüppel auf Neutralposition. Die SAFE Technologie steuert den Hubschrauber dann zurück in eine stabile Fluglage, vorausgesetzt der Hubschrauber befindet sich in ausreichender Höhe ohne Hindernisse auf dem Flugweg. Hat sich der Hubschrauber wieder stabilisiert stellen Sie den Klappenschalter zurück auf Position 0 um die Rettungsfunktion auszuschalten und zum normalen Flugmode zurück zu kehren. FR Type de Emetteur modèle Assignation des voies DX6i Réglage des courses: GEAR POS (0) GEAR: ↑100%; GEAR/F MODE POS (1) GEAR: ↓48% FLAPS: Norm ←↑100; LAND ↓100 MIX 1: ACT; GEAR → GEAR ACT RATE D 0%; U + 100% SW MIX TRIM INH Acro Direction des voies THRO-N ELEV-N GEAR-R AILE-N RUDD-N FLAP-N Modes de vol GEAR 0; Mix 0 = Mode débutant GEAR 1; Mix 0 = Mode intermédiaire GEAR 1; Mix 1 = Mode expérimenté Mode panique FLAP Position 0 = OFF FLAP Position 1 = Panique Double débat- Grands débat- Petits débat- Autres tements tements tements paramètres ELEV-AIL D/R 100% 70% Minuterie Compte à rebours, 08:00 Mode panique Comment utiliser le Mode panique du Blade 200 SR X avec la DX6i: • Placez les gaz à 50% et toutes les autres commandes au neutre pour obtenir le sauvetage le plus rapide. Dans n’importe quel mode de vol, en cas de détresse, placez l’interrupteur FLAP (Volets) en position 1 en relâchant les commandes au neutre. La technologie SAFE re-stabilisera l’hélicoptère, si l’altitude est suffisante et que la zone ne comporte pas d’obstacles. Replacez l’interrupteur FLAP en position 0 pour quitter le mode panique et revenir au mode de vol courant. IT Tipo di Trasmettitore modello Impostaz./Assegnaz. canale DX6i Acro Ragolaz. corsa: GEAR POS (0) GEAR: ↑100%; GEAR/F MODE POS (1) GEAR: ↓48% FLAPS: Norm ←↑100; LAND ↓100 MIX 1: ACT; GEAR → GEAR ACT RATE D 0%; U + 100% SW MIX TRIM INH Impostaz. Reverse Modalità di volo THRO-N ELEV-N GEAR-R AILE-N RUDD-N FLAP-N Antipanico Riduttori Corsa Corsa max min Altre impostazioni GEAR 0; Mix 0 = Principiante GEAR 1; Mix 0 = Intermedio FLAP Posizione 0 = OFF FLAP Posizione 1 = ELEV-AIL D/R 100% Antipanico 70% Timer Conteggio a scendere, 08:00 GEAR 1; Mix 1 = Esperto Antipanico Utilizzo della funzione antipanico del 200 SR X con la DX6i: • Mettere il gas al 50% e spostare tutti i comandi della trasmittente in posizione neutrale per recuperare la stabilità il più velocemente possibile. Quando vi troverete in difficoltà volando in qualsiasi modalità di volo, mettere l’interruttore FLAP in Posizione 1 e spostare gli stick di comando in posizione neutrale. La tecnologia SAFE riporterà il modello in posizione di volo stabile ammesso che si trovi ad un’altitudine sufficiente e che non ci siano ostacoli. Quando l’elicottero ritornerà in volo livellato, spostare l’interruttore FLAP in Posizione 0 per spegnere la funzione antipanico e tornare alla modalità di volo prescelta. ©2014 Horizon Hobby, LLC. Blade, SAFE and the Horizon Hobby logo are registered trademarks of Horizon Hobby, LLC. Patents pending. Created 5/14 45441
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : ghunt Create Date : 2014:06:02 09:10:56-05:00 Modify Date : 2014:06:02 09:10:56-05:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : Adobe InDesign CS5.5 (7.5.2) Format : application/pdf Title : 45441 BLH 200SRX DX6i addendum.indd Creator : ghunt Producer : Acrobat Distiller 10.0.0 (Macintosh) Document ID : uuid:756b6c3d-ddf6-e94c-87f1-700ebfa5acf2 Instance ID : uuid:027030c7-7436-3449-90aa-525251753b7c Page Count : 1EXIF Metadata provided by EXIF.tools