Pdf Dl95K Installation Guide 08905316A Booklet User Manual
2017-06-28
User Manual: Manual Pdf Dl95K Installation-Guide pdf_DL95K_installation-guide DL95K products
Open the PDF directly: View PDF
Page Count: 8
![INSTALLATION INSTRUCTIONS DL95K Dinky Link™ Surface Mount Extended Range Plasma\LCD\LED\CFL Friendly IR Receiver 1 DESCRIPTION These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. – anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 120 feet away*. FEATURES • Wire channel for clean installation. • System testing red-talk-back LED. • Includes 789-44 connecting block, power supply, and four 283D emitters for easy system installation. SPECIFICATIONS • Infrared carrier frequency bandwidth: 25 - 60 kHz. • Reception range: Up to 120 feet.* • Reception angle: +/- 60 degrees. • Cable requirements: See “INSTALLATION” below. • Max. Transmission length: 1 mile using 18 gauge wire. • Maximum current output: 100mA. • Drives IR emitters through Xantech Connecting Blocks, Controllers, etc. • Dimensions: 2.55” x 0.55” x 0.35” (65mm x 14mm x 9mm). • Power requirements: +12VDC, 10mA. * Depending on remote control output strength and ambient conditions. MOUNTING The IR receiver can be mounted to any flat surface, using the two-sided adhesive tape supplied. An additional feature is a wire channel on the rear of the surface mount IR receiver. This will give the installer the ability to provide clean wire dressing in any direction.](https://usermanual.wiki/Manual/PdfDl95KInstallationGuide.1066066916-User-Guide-Page-1.png)
User Manual: Manual Pdf Dl95K Installation-Guide pdf_DL95K_installation-guide DL95K products
Open the PDF directly: View PDF
Page Count: 8