Pdf Lx Ams 2624P Quick Install Guide User Manual

User Manual: Manual Pdf Lx-Ams-2624P Quick-Install-Guide pdf_LX-AMS-2624P_quick-install-guide LX-AMS-2624P products

Open the PDF directly: View PDF .
Page Count: 2

Fold Fold Fold

READ ME FIRST

QUICK INSTALL GUIDE

26-Port Gigabit Stackable PoE+

L2/L3 Managed Switch

AMS-2624P

Includes:

AMS-2624P 26-Port/24-port PoE+ Switch

Rack Mount Kit

Rubber Feet

Power Cord

INSTALLATION AND SETUP

1Physical Installation

The AMS-2624P can easily be installed in a standard 19” rack. Two mounting ears

are included for installing and stabilizing the switch. When attaching the mounting

ears and installing the switch in a rack, please refer to the following illustration:

Rack-Mounting the AMS-2624P

 Use the included screws to attach the mounting ears to each side

of the switch.

 Mount the switch in the rack with the LEDs facing outwards. Be sure the

switch is level and properly secured in the rack.

Desktop Setup

For use as a desktop device, position and apply the included rubber feet to the

bottom of the AMS-2624P.

2Connecting Ethernet and Power

Ethernet and Power Connections

Use one of the 26 Ethernet ports to connect the AMS-2624P to any Ethernet-

enabled device, including servers, routers or other switches.

No crossover cable is necessary.

The AMS-2624P supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/

full-duplex mode and 1000 Mbps full-duplex mode. Ports 1-24 are PoE+ and

are enabled by default. Ports 25 and 26 consist of two Gigabit RJ-45 uplink

ports and 2 shared SFP combo ports; use only one of the same-numbered

ports at a time.

Use the included power cable to connect the AMS-2624P to a surge-

protected outlet. The AC input socket is on the rear panel. The built-in

power supply supports 100~240VAC at 50/60Hz.

Network Cabling

Luxul recommends Category-5, super Category-5 or Category-6 unshielded

twisted pair (CAT5/CAT5e/CAT6 UTP). To ensure best performance and

stable data transmission at 1000 Mbps, use Category-6 shielded twisted pair.

cCAUTION: Multiple Uplink channels can create loops, resulting in

network failure. Ensure only one Uplink channel exists

between switches or between the AMS-2624P and a router.

nNOTE: When powering up, the port LEDs may take a moment to

initialize. This is normal as the AMS-2624P initialization and

startup sequence completes.

nNOTE: The AMS-2624P has an internal 250W power supply. Do not

exceed 25.5W each or 250W combined consumption of all

external PoE devices.

Sales

801-822-5450

sales@luxul.com

Technical Support

801-822-5450

support@luxul.com

LUX-QIG-AMS-2624P-v4 03241711

Copyright and Trademark Notices

No part of this document may be modified or adapted in any way, for any purposes without permission

in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves

the right to make changes to any product to improve reliability, function, or design. No license is granted,

either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied

license only exists for equipment, circuits and subsystems contained in this or any Luxul product.

© Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and

Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other

trademarks and registered trademarks are property of their respective holders.

Fold Fold Fold

3 Preparing for Access

IP Addressing

If the AMS-2624P is connected to a network with a 192.168.0.X address

scheme, and your computer shares a similar address on the same network,

you can skip to the next step, Access and Setup.

nNote: If another device on your network shares the 192.168.0.4

address, you’ll need to temporarily reassign or remove that

device while you configure the AMS-2624P.

If your network uses an address scheme other than 192.168.0.X, you’ll need

to set a temporary static IP address on the computer you’re using for

configuration. To do so, set the IP address of your computer to an address

in the 192.168.0.X range, then set the Gateway/Router address to 192.168.0.4

(the default IP address of the AMS-2624P).

Once you’re finished configuring the switch, you can return your comput-

er’s IP configuration to normal, typically “Obtain Automatically/DHCP.”

nNote: Visit http://luxul.com/ip-addressing to learn more about

changing your computer’s IP address and getting connected.

4Access and Setup

Getting Connected

Use an Ethernet cable to connect your computer to the AMS-2624P, then

power on the switch.

Logging In

To access the AMS-2624P web configuration, open your web browser and

enter the switch’s default 192.168.0.4 IP address in the address field. Log in to

the switch using the default user name and password:

Default IP: 192.168.0.4

Username: admin

Password: admin

Select the menu items on the left to view and/or modify the configuration.

Refer to the Quick Setup Guide at Luxul.com for more detailed information on

setup, IP configuration and routing, PoE, VLANs, Spanning Tree, and Stacking.

5Hardware Operation

Front Panel

The front panel of the AMS-2624P Switch includes dual colored Link/Activity

LEDs that can be switched from green to blue. In addition, the front panel has

Link/Activity and PoE mode indicators as well as System and Power LEDs.

AMS-2624P Front Panel View

Rear Panel

The rear panel of the AMS-2624P Switch includes 1 console port, 24 1000Mbps

RJ45 and 2 RJ-45/SFP combo ports, as well as LED indicators for each port. Each

1000Mbps port has one Link/Activity/PoE LED. A mode/reset button switches

the display between Link/Activity and PoE modes.

AMS-2624P Back Panel View

LED Indicators

The LED indicators on the AMS-2624P include System, Link/Act and PoE LEDs,

and an LED for each port. These LED indicators show the operating status of

the AMS-2624P and each port connection.

Mode/Reset Button to Change LED Functionality

Tapping the Mode/Reset button briefly switches the port indicator between

displaying port link speed and PoE status.

The following chart shows the LED indicators of the AMS-2624P along with an

explanation of the indicator’s properties:

Indicator

Name

Description

System Green Flashing Indicates normal operation.

Green On Indicates a malfunction. Contact support.

Red On Indicates power-on system initialization.

O Indicates startup/initialization process or

that power is not on.

Port Link/

Act Status

1-26

Green 1000Mbps device connected to the port.

Yellow 10/100Mbps device connected to the port.

Flashing Port receiving or transmitting data.

O Nothing connected to the port.

Port PoE

Status 1-24

Green Switch is providing PoE power to a device.

Yellow PoE is o due to a fault or because the

connected device is exceeding power limit.

O Port disconnected or link failed.

Note: At startup, the port LEDs will flash briefly during a self-test.

Mode/Reset Button to Reset/Restore

The Reset button (located at the lower-left corner of the front panel) is

used to reset (reboot) the switch, or to restore the switch to factory

default settings.

XTo Reboot/Reset the Switch: With the AMS-2624P powered on, press

the Reset button for approximately three seconds until the Link/Act and

PoE LEDs both light, then release the button.

cCAUTION: Do not hold the button for more than four seconds.

Doing so could erase all settings and restore

factory defaults.

XTo Restore Default Settings: With the AMS-2624P powered on, press

and hold the Reset button approximately eight seconds, until both the

Link/Act and PoE LEDs turn o, then release the Reset button and the

switch automatically restores factory default settings and reboots. Once

the System LED starts flashing again, the AMS-2624P is running with

factory defaults.

cCAUTION: Please note that restoring Default Settings will remove

any/all custom configuration.