Pdf Sc1 Installation Manual User

User Manual: Manual Pdf Sc1 Installation-Manual pdf_SC1_installation-manual SC1 products

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

9

Operation Diagnostics

Appendix B:
ViaNET Cable wiring diagram:

One blink, short
pause, 5 blinks,
long pause

The SC1 requires service.
Call ELAN Technical Support.

One blink, short
pause, 4 blinks,
long pause

Interrupted or corrupted download.
Redownload through USB connection.

One blink, short
pause, 3 blinks,
long pause

Interrupted or corrupted download.
Redownload through USB connection.

Slow Blink One
blink, short
pause, 2 blinks,
long pause

Interrupted download, corrupted download,
or incompatible firmware. Download firmware
update through USB connection.

Blue (Pin 1) - Systems Sense (Passthrough)
White/Blue (Pin 2) - IR Out (Passthrough)
Orange
3) -1)
VIA!Net
RS-485
Blue(Pin(Pin
- System
Sense
(Passthrough)
White/Orange
(Pin(Pin
4) - 2)
VIA!Net
RS-485
+
White/Blue
- IR Out
(Passthrough)
Green
(Pin 5) -(Pin
ZNet3)485
Orange
- VIA!Net
RS-485 White/Orange
- VIA!Net
RS-485 +
White/Green
(Pin 6) -(Pin
ZNet4)485
+
Green
5) - ZNet 485 Brown
(Pin 7)(Pin
- Ground
White/Green
6) - or
ZNet
White/Brown
(Pin 8)(Pin
- +12V
+16V485 +
Brown (Pin 7) - Ground
White/Brown (Pin 8) - +12V or +16V

Standard ELAN RJ-45 Pin-Out

Standard ELAN RJ-45 Pin-Out
PIN # COLOR CODE

FRONT

7

1
2
3
4
5
6
7
8

TAB

BLUE
WHITE/BLUE
ORANGE
WHITE/ORANGE
GREEN
WHITE/GREEN
BROWN
WHITE/BROWN

SC1 – Serial Controller
Quick Install Guide

CABLE

Figure 4-1: VIA!NET Pin-Out

English

8

Appendix A:
RJ-45 Serial crossover cable wiring diagram.
Using 568B Pin Out
Func%on	
  

Using 568A Pin Out
SC1	
  
Serial	
  	
  
RJ45	
  

Func%on	
  

1	
  

OR/WH	
  

2	
  

N/C	
  

SC	
  
Controller	
  
RS232	
  
RJ45	
  

RJ45	
  
Pin#	
  

N/C	
  

OR/WH	
  

DCD	
  

Orange	
  

SC	
  
Controller	
  
RS232	
  
RJ45	
  

RJ45	
  
Pin#	
  

SC1	
  
RS232	
  	
  
RJ45	
  

N/C	
  

GR/WH	
  

1	
  

GR/WH	
  

DCD	
  

Green	
  

2	
  

N/C	
  

DTR	
  

GR/WH	
  

3	
  

N/C	
  

DTR	
  

OR/WH	
  

3	
  

N/C	
  

SGND	
  

Blue	
  

4	
  

Blue	
  

SGND	
  

Blue	
  

4	
  

Blue	
  

RD	
  

BL/WH	
  

5	
  

Green	
  

RD	
  

BL/WH	
  

5	
  

Orange	
  

Limited Warranty
ELAN HOME SYSTEMS, LLC, a Core Brands, LLC company (“ELAN”) warrants the SC-1 Serial Device Controller
to be free from defects in materials and workmanship for the period of two years (2 years) from date of purchase.
If within the applicable warranty period above purchaser discovers that such item was not as warranted above and
promptly notifies ELAN in writing, ELAN shall repair or replace the item at the company’s option. This warranty shall not
apply (a) to equipment not manufactured by ELAN, (b) to equipment which shall have been installed by other than an
ELAN authorized installer, (c) to installed equipment which is not installed to ELAN’s specifications, (d) to equipment which
shall have been repaired or altered by others than ELAN, (e) to equipment which shall have been subjected to negligence,
accident, or damage by circumstances beyond ELAN’s control, including, but not limited to, lightning, flood, electrical
surge, tornado, earthquake, or other catastrophic events beyond ELAN’s control, or to improper operation, maintenance
or storage, or to other than normal use of service. With respect to equipment sold by, but not manufactured by ELAN,
the warranty obligations of ELAN shall in all respects conform to the warranty actually extended to ELAN by its supplier.
The foregoing warranties do not cover reimbursement for labor, transportation, removal, installation or other expenses
which may be incurred in connection with repair or replacement.
Except as may be expressly provided and authorized in writing by ELAN, ELAN shall not be subject to any other
obligations or liabilities whatsoever with respect to equipment manufactured by ELAN or services rendered by ELAN.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES
EXCEPT WARRANTIES OF TITLE, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
ATTENTION: TO OUR VALUED CONSUMERS
To ensure that consumers obtain quality pre-sale and after-sale support and service, ELAN Home Systems products
are sold exclusively through authorized dealers. ELAN products are not sold online. The warranties on ELAN products
are NOT VALID if the products have been purchased from an unauthorized dealer or an online E-tailer.

TD	
  

Green	
  

6	
  

BL/WH	
  

TD	
  

Orange	
  

6	
  

BL/WH	
  

CTS	
  

BR/WH	
  

7	
  

Brown	
  

CTS	
  

BR/WH	
  

7	
  

Brown	
  

To determine if your ELAN reseller is authorized, please contact ELAN Home Systems at (707) 283-5900.

RTS	
  

Brown	
  

8	
  

BR/WH	
  

RTS	
  

Brown	
  

8	
  

BR/WH	
  

						www.elanhomesystems.com

Items in Box
• SC1
• RJ-45 to RJ-45 Crossover cable
• Installation Manual
• Power supply

Specifications
Power
Power Requirements 12VDC @ 50mA Nominal

Introduction
The ELAN SC1 is a serial to ViaNet interface that provides
integration of legacy ViaNet devices with the ELAN gSC2, gSC10
and g1 (g Series) controllers. Specifically the SC1 allows the
g Series controllers to communicate with the ELAN S1616A,
M86A and TS2 and TS2L. It may provide interface to additional
ELAN ViaNet legacy components, but components other than
those listed in the previous sentence have not been tested and
are not supported. You should test the SC1 with devices other
than those listed above prior to committing your customer to
an unsupported upgrade path.
Features
• Converts Serial protocol communications
to ELAN ViaNet protocol communications
• Convenient RJ-45 to RJ-45 connections
• LED activity indicator for easy troubleshooting
• g! Controller Programming

COM Port
Type RJ-45
Recommended connector:
RJ-45 to RJ-45 Crossover Cable (Included)
VIA!NET IN/OUT
ELAN Standard RJ-45
Recommended cable:
RJ-45 to RJ-45 ViaNET cable (Not Included)
Dimensions
3”L x 2.3”W x 1”H
7.62cm L x 5.842cm W x 2.54cm H
Weight
0.5 lbs.
227 grams
Shipping Weight
1 lbs.
454 grams

Please consult the latest SC1 integration note for
proper g! System Controller configuration.

®

®

© 2014 Core Brands, LLC. All rights reserved. ELAN , g! are
registered trademarks of Core Brands, LLC, a Nortek company.

P/N 9905976 Rev. B 02/2014

1

3

Functions & Indicators

5

Installation
Connecting the ELAN SC-1 to the serial port of a gSC2, gSC10 or g1 System Controller.

1

gSC2 & gSC10:
Using the included RJ-45 to RJ-45 crossover cable (P/N 7600218) to connect the
“RS232 CONTROL” port of the SC1 to an open serial port on gSC2 or gSC10 (Figure 2-1).
If you need a crossover cable longer than what has been included see appendix A
for wiring instructions. (figure 2-1)

Connecting the SC1 to an S1616A or M86A:
Using a ViaNET cable (see appendix B for wiring instructions) connect from the ViaNET
OUT port on the SC-1 to the ViaNET IN port on the S1616A or M86A (shown).
(figure 2-3)

M86A
ZONE 1

SC1

ZONE 2

120VAC
400W
ZONE 3

3

4

5

7

6

8

SOURCE IR OUTPUTS

50/60Hz

1

2

3

VIANET IN

IN

5

4

6

L

ALL
ZONES
IR OUT

SENSE INPUTS

R

L

R

L

R

L

SOURCE
INPUT 1

SOURCE
INPUT 2

SOURCE
INPUT 3

SOURCE
INPUT 4

SOURCE
INPUT 5

SOURCE
INPUT 6

SOURCE
INPUT 7

SOURCE
INPUT 8

IR LOOP
IN

PG/DB IN

IR EXPANSION POR TS
ZONE PRE-AMP OUTPUTS

OUT
ZONE 4
L+

GND

ZONE 1

gSC2

2

2

1

ZONE 5
R+

L+

ZONE 6
GND

ZONE 2

R+

L+

GND

R+

L+

GND

R+

ZONE 4
ZONE 3
CLASS 2 WIRING - SPEAKER OUTPUTS - 30W/CH. @ 8

L+

GND

ZONE 5

ohms

R+

L+

GND

L

PG/DB OUT

OUT

VIANET OUT

L

L

L

L

L

R

R

R

R

R

R

L

R

L

R

L

LOOP
OUTPUT 1

LOOP
OUTPUT 2

LOOP
OUTPUT 3

LOOP
OUTPUT 4

LOOP
OUTPUT 5

LOOP
OUTPUT 6

LOOP
OUTPUT 7

LOOP
OUTPUT 8

R

R+

ZONE 6

1

2

3

4

5

6

MOH OUT

ViaNET Cable
PWR3

(not included)

Figure 2-3: Installation
RJ-45 Crossover Cable

SC1
P/N 7600218 (included)

6

5

4

Connecting the SC1 to a TS2 or TS2L:
Using a ViaNet cable (see appendix B for wiring instructions) connect from the ViaNET OUT
port on the SC1 to the ViaNET IN port on a PPVN, PVIA1, PVIA4, PVIA10, SPP or similar
Precision Panel. The SC1 does not supply power for ViaNET devices. Precision Panels require
their own power supply and this will supply power to the TS2 or TS2L.

Figure 2-1: Installation

3

Figure 1-1: Functions & Indicators

2

4

Functions & Indicators
Item#

Item

Function

1

RS232 Port

Communicates to Serial Devices

2

LED
Indicator

Status Indicator

3

USB Port

Programming
Interface

4

Power
Connector

12VDC
Connection

5

VIA!NET
OUT

RS485 Data
Connection Loop

6

VIA!NET
IN

RS485 Data
Input Connection

6

Installation
g1:
Connect the SC1 to the g1 Serial Dongle (supplied with g1) using the RJ-45 to RJ-45
Crossover Cable (P/N 7600218) (supplied with SC1) and a DB9 female to RJ-45 Null Adapter
(P/N 8900599, not included). Alternative connection method: use a straight-through RJ-45
cable (not included) and a DB9 Female to RJ-45 Adapter (P/N 8900598, not included)
to connect to the g1 Serial Dongle (supplied with g1). (Figure 2-2)

g1
PWR3

Serial
Dongle

HACB
328

RJ-45 to RJ-45 Crossover Cable (P/N 7600218) (included)

DB9 female to RJ-45
Null Adapter
(P/N 8900599)
(not included)

or

standard straight-through RJ-45 cable
(not included)

HACB
307

Table 1-1: Functions & Indicators

Operation Diagnostics
The SC1 LED Indicator is an excellent source of information. It provides visual feedback
determining operational status.

DB9 female to RJ-45 Adapter
(P/N 8900598)
(not included)

Figure 2-2: Installation

Figure 3-1: LED Indicator

SC1
Slow Blink

Normal operations. Unit will blink in response to
commands.

Fast Blink

Occurs when connected to USB cable for downloading.