Maono Technology WKM-13 2.4GHz Wireless Mouse User Manual SMK 606618AG 01

Shenzhen Maono Technology Co., Ltd. 2.4GHz Wireless Mouse SMK 606618AG 01

User Manual

1.Pick the USB receiver out from the rear side
WirelesskeyboardusestwoAAAalkalinebatteries,
WirelessmouseusesoneAAalkalinebattery
* ThismouseisequippedwithTraveling-Power-Savefunction.
Whenyouaretravelingwiththismouse,theLEDofthemousewillbeswitchedoff
automaticallyforthepurposeofpower-save,butthepre-conditionisthatthe
receiverisdisconnectedwithyournotebookorPC.
When you find this set doesn't work, you can make the mouse back to working
condition by restoring the mouse back to factory default settings.
1: Check the battery volume is normal; if the battery is used out,
please replace new batteries.
2: For mouse,reinsert the USB receiver onto the USB port of PC or notebook,then
3: For the keyboard ,reinsert the USB receiver onto the USB port of PC or nottebook, then
*whennoanyclikorscrollormoving,themousewillcometosleep
statusforenergy savingafterabout8minutes,towakeup,youcanscrollthe
wheel or click any button for this
USBport
USBreceiver
1:whenyouwantusethemouse,youcantakeoutthereceivertocomputerbythe
list step;
2:whenyouneedstoptheworkortotravel,youcanstorethereceiveronthemouse
for the moving by the list step.
FN+ESC=MediaPlayer
MultimediaHotkeysfunctions:
FN+F1=Play/Pause
FN+F2=PreviousTrack
FN+F4=Volume
Down
FN+F3=NextTrack
FN+F6=Mute(Windows)
FN+F7=Webhome
FN+F5=Volume
Up
FN+F8=Search
FN+F9=Favorite
FN+F10=Email
FN+F11=Lockkey
FN+F12=Mycomputer
Model:WKM-13, WKM-23
RF2.4GHz Auto-Link
Keyboard&OpticalMouse
Your RF2.4GHz mouse have energy saving model, when no any click or
scroll or move, the mouse will come to sleep status in about 8 minutes; to
wake up, you can scroll the wheel or click any button for this. (On this
energy saving, the optical LED will turn off, so, the mouse moving will not be
responded)
State of standby and wake up the mouse
Store the receiver on the mouse
Power-Save function:
Install the Batteries
Install the battery in the keyboard
Install Batteries in the Mouse
Step 1.Open the battery compartment
Step 2.Insert the batteries as shown into the battery compartment,
and put back the cover
Step 1. Remove the battery compartment
cover on the bottom of the keyboard
Step 2. Insert the battery into the battery
compartment,put back the cover.
Connect the USB Receiver
reinstallbatteryagaintomouse.
CAUTION: To use this device properly, please read
the user's guide before installation.
USB receiver
12
of the mouse.
2.Insert the USB receiver into USB port.
3.The connection will be done
automatically.
Restore
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
reinstallbatteryagaintomouse.

Navigation menu