Marantec America D384315 Digital 382 and Digital 384 2channel and 4channel hand transmitter as accessory for garage door opener User Manual 15 Digital 384 382 UserInstruction

Download:
Mirror Download [FCC.gov]
Document ID	3068269
Application ID	imJ6GyQT16/EHWOyhgLTsQ==
Document Description	15_Digital 384_382 UserInstruction
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.24kB (427964 bits)
Date Submitted	2016-07-19 00:00:00
Date Available	2016-07-19 00:00:00
Creation Date	2016-07-14 11:02:20
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2016-07-14 11:02:49
Document Title	15_Digital 384_382 UserInstruction
Document Creator	Adobe InDesign CS5 (7.0)

TRANSMITTERS
Instruction
for models
315 MHz:
916 MHz:
Digital 382, Digital 384
Digital 382, Digital 384
FEATURES
A family of state-of-the-art transmitters, each transmitter is custom
encoded and ergonomically designed to be an integral part of your
garage door opener system, with two styles to suit your personal
preference:
 Mini 2-channel: Digital 382,
 Mini 4-channel: Digital 384.
Figure 1:
Mounting Plate & Visor Clip
fig. 1A
1. USING THE TRANSMITTER
All transmitters come with batteries already installed.
 To open or close garage door, press and hold the button. When
garage door begins to move release button.
 To stop the garage door during travel, press and hold button until
door stops, then release button.
 To continue the garage door travel after stopping it, press and
hold the button. Press button once, the door will travel in the
opposite direction.
2. TRANSMITTER MOUNTING (Figure 1)
Mounting Plate
(optional)
fig. 1B
Visor Clip
The transmitters can be convenietly mounted on the wall (fig. 1A)
using the mounting plate (optional) or inside your car using the visor
clip (fig. 1B).
Mounting Plate (fig. 1A)
The mounting plate enables you to mount the transmitter easily to
the wall or other area.
 Secure the mounting plate to area using screw and anchor.
 Slide the transmitter into the mounting plate, which will hold it
firmly in place.
Visor Clip (fig. 1B)
The visor clip allows for easy mounting of the transmitter to a car
visor.
 Snap visor clip into transmitter.
Note: If you do not need the visor clip, install the visor
compartment cover.
Figure 2:
Battery Compartment
3. BATTERY REPLACEMENT (Figure 2)
The transmitter has a battery check function, which checks the capacity of the battery during the transmission process. If the battery is
weak, the LED blinks during transmission.
When replacing batteries follow the steps below:
 Open the transmitter by using a narrow screwdriver.
 Insert a 3V battery (type CR2032) as shown.
 Close the transmitter.
Note: Replace batteries with same type only.
Screwdriver
Battery
Visor Compartment
Cover
TRANSMITTERS
Instruction
(continued)
4. MULTIPLE TRANSMITTERS (Figure 3)
Each transmitter comes factory programmed with random codes.
2-channel transmitters have 2 different random codes, one per button
and 4-channel transmitters have 4 different random codes, one per
button. Transmitters that are purchased separately as accessories have
random codes that must be changed in order to match the code of the
“active” transmitter, which you are already using. Below are instructions for transferring an active code from a button on one transmitter
to a button of your choice on another transmitter.
 Connect the transmitter with active code to the new transmitter
using the programming connector (fig. 3A).
 Press and hold the selected channel button on the transmitter with
the active code (fig. 3B). The light in the transmitter illuminates.
 Press and hold the respective channel button on the new transmitter (fig. 3C). The light in the transmitter initially starts blinking
and then illuminates continuously after 1-2 sec. Code transfer is
completed.
 Programming connector can be removed and both transmitters
can now be used to operate the same door.
Figure 3: Multiple Transmitters-Code Transfer
fig. 3A
Transmitter with active Code
Programming
Connector
new Transmitter
fig. 3B
Note: For multi-button transmitters, be sure to carry out this procedure for all the buttons you desire to use.
5. CHANGING THE CODE ON TRANSMITTERS (Figure 4)
The transmitter factory preset code can be changed as follows:
 Connect the programming connector into the lateral socket of the
transmitter to change the code.
 Short one of the outer pins of the programming connector with
the middle pin
 Press and hold the respective channel button. The light will blink
rapidly for approx. 5 sec. Release the button after the light illuminates continuously. Then remove the programming connector.
fig. 3C
Figure 4: Code Changing
Note: For multi-button transmitters, be sure to carry out this procedure for all the buttons you desire to use.
FCC Certified: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC §15.21 (Warning Statement): Any changes or modifications not expressly approved by the party responsible for compliance could void
the user´s authority to operate the equipment.
CNR Certified: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
UM123406
©2016 All rights reserved.
6/16 ENG

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2016:07:14 11:02:20+02:00
Metadata Date                   : 2016:07:14 11:02:49+02:00
Modify Date                     : 2016:07:14 11:02:49+02:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Instance ID                     : uuid:a53e236d-809f-47cb-8f74-413b4b5cefa7
Document ID                     : xmp.did:982EA16CF244E61183D6FAEB7CF5D37B
Original Document ID            : xmp.did:DF97F3529534E611B504FBC89D5F069D
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:DF97F3529534E611B504FBC89D5F069D, xmp.iid:E297F3529534E611B504FBC89D5F069D, xmp.iid:E397F3529534E611B504FBC89D5F069D, xmp.iid:E697F3529534E611B504FBC89D5F069D, xmp.iid:EF385BA3CB36E611A787DA39ADC5E526, xmp.iid:F9385BA3CB36E611A787DA39ADC5E526, xmp.iid:5EFFBA2AF736E611B5B8F7B4CDD202B2, xmp.iid:4FEA1E738E37E61184B2BFC2950156A0, xmp.iid:64DD3DDC8D38E611A558CA8205C58A39, xmp.iid:F86DBED16043E6119074F87557645859, xmp.iid:B2060A567143E61183BBDD455DCBD93B, xmp.iid:91AE73747543E61183BBDD455DCBD93B, xmp.iid:92AE73747543E61183BBDD455DCBD93B, xmp.iid:53E7B4D47743E61183BBDD455DCBD93B, xmp.iid:34FA558B5344E611A4D0FF5CB66177CC, xmp.iid:F4682E8FF044E61183D6FAEB7CF5D37B, xmp.iid:B7B7F913F244E61183D6FAEB7CF5D37B, xmp.iid:E2FF6F35F244E61183D6FAEB7CF5D37B, xmp.iid:982EA16CF244E61183D6FAEB7CF5D37B, xmp.iid:7A660422F544E611B712868B2E2CE105, xmp.iid:F42D8B61F544E611B712868B2E2CE105, xmp.iid:5FBF7A49FD44E611AF91D4086A456243, xmp.iid:D828C9700645E6118691E8E8494F27DF
History When                    : 2016:06:17 16:11:02+02:00, 2016:06:17 16:46:51+02:00, 2016:06:17 16:46:51+02:00, 2016:06:17 17:03:26+02:00, 2016:06:20 11:44:52+02:00, 2016:06:20 14:10:40+02:00, 2016:06:20 16:56:28+02:00, 2016:06:21 10:59:23+02:00, 2016:06:22 17:27:41+02:00, 2016:07:06 12:02:59+02:00, 2016:07:06 14:30:42+02:00, 2016:07:06 14:30:42+02:00, 2016:07:06 14:34:33+02:00, 2016:07:06 14:47:43+02:00, 2016:07:07 17:00:29+02:00, 2016:07:08 11:44:26+02:00, 2016:07:08 11:55:18+02:00, 2016:07:08 11:57:47+02:00, 2016:07:08 11:57:47+02:00, 2016:07:08 12:17:11+02:00, 2016:07:08 12:18:57+02:00, 2016:07:08 13:15:33+02:00, 2016:07:08 14:21:04+02:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:E2FF6F35F244E61183D6FAEB7CF5D37B
Derived From Document ID        : xmp.did:91AE73747543E61183BBDD455DCBD93B
Derived From Original Document ID: xmp.did:DF97F3529534E611B504FBC89D5F069D
Derived From Rendition Class    : default
Doc Change Count                : 1470
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 2
Creator                         : Adobe InDesign CS5 (7.0)

EXIF Metadata provided by EXIF.tools