Marantz Stereo Tuner St4000 Users Manual 1
STEREO TUNER ST4000 dfu_ST4000N
2015-02-03
: Marantz Marantz-Stereo-Tuner-St4000-Users-Manual-466600 marantz-stereo-tuner-st4000-users-manual-466600 marantz pdf
Open the PDF directly: View PDF .
Page Count: 9
Download | |
Open PDF In Browser | View PDF |
R Model ST4000 User Guide TUNER WARNINGS Never expose the equipment to rain or moisture. Never remove the equipment’s cover. Never insert anything into the equipment’s vents. Never handle the mains lead while your hands are wet. Refer to the figures on the pages at the back of this user’s guide. The callout numbers on the figures correspond to those found in the text. All references to the connections and controls that are printed in BOLD type are as they appear on the unit. EQUIPMENT MAINS WORKING SETTING This Marantz product is available in two different variations, depending on geographical area. One variation has a preset mains voltage (230V for General Europe model and U.K. model), while the other variation features variable voltage that can be selected using a voltage selector on rear panel (115V/230V). The voltage selector must be set for your local mains voltage before any connection to the mains supply. If you need to change its voltage setting, consult your dealer your local Marantz service provider. INSTALLATION Remember the following important points when installing the Tuner. • Do not expose the component to rain or moisture, as this may cause damage to the Tuner. ENGLISH Thank you for selecting the Marantz ST4000 FM/AM Stereo Tuner for your system. Please read these operating instructions carefully. We recommend that you read the entire user guide before you attempt to connect or operate the Tuner. After you have reviewed the contents of this manual, we suggest that you make all system connections before you attempt to operate the unit. FRANçaIS INTRODUCTION Be sure to read this section before any connection to the mains supply. DEUTSCH FOREWORD PRECAUTIONS To change a fuse in this type of plug proceed as follows: The following precautions should be taken when operating the equipment. 1. Remove fuse cover and fuse. 2. Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved type. 3. Refit the fuse cover. GENERAL PRECAUTIONS If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. When installing the equipment ensure that: If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. — it is placed on a vibration-free surface. — air is allowed to circulate freely around the equipment. — it will not be exposed to excessive heat, cold, moisture or dust. — it will not be exposed to direct sunlight. NOTE: — it will not be exposed to electrostatic discharges. The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. In addition, never place heavy objects on the equipment. HOW TO CONNECT A PLUG (FOR U.K. MODEL) If a foreign objector water does enter the equipment, contact your nearest dealer or service center. The wires in the mains lead are coloured in accordance with the following code: Do not pull out the plug by pulling on the mains lead; grasp the plug itself. BLUE— “NEUTRAL” (“N”) BROWN—“LIVE” (“L”) ESPAÑOL This apparatus is fitted with an approved moulded 13 Amp plug. ITALIANO IMPORTANT: (FOR U.K. MODEL) NEDERLANDS • Prevent extra heat from reaching the unit. Never put the Tuner in the full glare of the sun or near a heat source. 2. The BROWN wire must be connected to the terminal which is marked with the letter “L” or coloured RED. ST4000 FEATURES 3. Do not connect either wires to the earth terminal in the plug which is marked by the letter “E” or by the safety earth symbol ˙ or coloured green or green-and-yellow. • 60-station (FM30, AM30) preset memory with auto preset memory function. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead—not simply over the two wires. • Radio Data System. (Europe version only) • Up to 120-minute sleep timer. PORTUGUÊS It is advisable when leaving the house, or during a thunderstorm, to disconnect the equipment from the AC outlet. 1. The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK. SVENSKA • Timer ON/OFF. COPYRIGHT Recording and playback of any material may require previous consent. Refer to the following for further information. — Copyright Act 1956 — Dramatic and Musical Performers Act 1958 — Performers Protection Acts 1963 and 1972 DANSK — Any subsequent statutory enactments and orders 3 ENGLISH CONTROLS AND THEIR FUNCTIONS (See page 50) !0 ST. NAME Button (See page 5) q POWER (STANDBY/ON) Button !2 FM MODE Button !1 NEXT Step Button (See page 5) Used to select stereo or mono when listening to FM broadcasts. FRANçaIS w SLEEP Button NOTES: e TIMER Button • The AM scan step can be changed by pressing the FM MODE buttons simultaneously for 5 seconds. (overseas version only) Press this button with DAILY preset and the indicator will shown on the display. r Multi-function Display !3 MEMORY Button z SLEEP Indicators • MANUAL: To preset FM or AM (MW) in the system, pres briefly (0.5 second or less). • AUTO: When you press the button for long (more than 0.5 second), FM or AM (MW) broadcasting will automatically be preset in the system. x RDS, FILE, SLEEP TIME mode Indicators DEUTSCH • RDS: PS, PTY DATA will be displayed, and RDS indicator lights. • FILE: Alphabets, symbols, and numbers will be displayed when you write a broadcasting name with File Button (up to 4 letters). • Timer mode: When the DAILY function is programmed, the daily ON/OFF times will be shown in the display. !4 BAND selector Button Press the button to switch between FM and AM (MW) bands. ESPAÑOL NEDERLANDS c Tuned Indicator This indicator lights when correctly tuned to a broadcast. v STEREO Indicator This indicator will light up when FM stereo broadcasting is received. b TIMER Indicator n Frequency mode, TIME Indicator • The frequencies of FM, AM (MW) will be displayed. • Hour, Minute: When you program current time, DAILY, the times of On/Off, and the hour and minute of CT among RDS will be displayed. m Channel Display The channel number selected by use of the PRESET UP/DOWN button will be shown in the display. , Signal Indicator t PRESET UP/DOWN Buttons • Broadcast Memory function: Each time you press the PRESET UP/DOWN button briefly (for 0.5 second or less), you can listen to broadcasts in a programmed sequence. This function is used to memorize FM or AM (MW) broadcasting, or to select memorized broadcasts. y TUNING UP/DOWN Buttons (▼/▲) Used to select the broadcast you want to listen to or adjust the current time, DAILY, SLEEP presets, etc. u DISPLAY Buttons 1) The button works only when you receive FM broadcasting stations, and is used to set the RDS mode. 2) Press the button longer than 1 second, and PTY search will become operable. i DAILY Button o TIME ADJUST Button (See page 5) DANSK SVENSKA PORTUGUÊS ITALIANO The reception status of the broadcasting. . MEMORY Indicator 4 HOW TO MEMORIZE BROADCASTING STATION NAME HOW TO ADJUST CURRENT TIME If only a frequency is preset, fill in the station name using manual or automatic memory presetting. You can adjust the current time even if the system power is off. Time adjustment (for example: 11:35) ENGLISH OPERATIONS 1. Press the TIME ADJUST button. (Clock section will be shown on the display.) FRANçaIS (Example) FM 98.80 MHz 3ch, Station name: BBC 1 1. Press the BAND button. Select the FM band. 2. Set hour (11) by pressing the TUNING (▼/▲) buttons. 2. TUNING 3. Press the NEXT button. (Minutes signal blinks on the display.) Set 98.80 MHz by pressing the TUNING button. Press the ST. NAME button. “---” or the station name preset last will be shown on the display. Preset the station name, “BBC 1”. (1) B fi B ---: after setting “B” by pressing the TUNING button when the first signal blinks, press the NEXT button. (2) Preset “B, B, C, 1” as in step (1) above. HOW TO PRESET BROADCASTS4. MEMORY Press the BAND button to select the broadcast band. Press the MEMO button briefly (0.5 second or less). (The “MEMORY” indicator blinks.) Manual Memory Presetting 1. TUNING 5. PRESET CALL Select the broadcast frequency you want to memorize by pressing the TUNING UP/DOWN button. 2. PRESET CALL ESPAÑOL After setting “03” by pressing the PRESET UP/DOWN button, press the MEMO button briefly once more. • BBC1 FM 98.80 MHz 03 has been just preset. Press the MEMO button briefly (for 0.5 second or less). Select the channel you want by pressing the PRESET UP/DOWN button while the “MEMORY” indicator lamp is blinking. NOTES: • File content: A, B, C … X, Y, Z (alphabet) 0, 1, … 8, 9 (number), blank 3. MEMORY NEDERLANDS 3. ST. NAME 5. Pressing the TIME ADJUST button or NEXT button completes the adjustment. DEUTSCH 4. Set minute (35) by pressing the TUNING (▼/▲) buttons. Automatic Memory Presetting HOW TO USE SLEEP FUNCTION 1. MEMORY Sleep programming is used to preset the time to turn off system power while listening to music. Press the MEMO button for long (for more than 0.5 second). Whenever the next highest broadcast frequency is selected, the selected broadcast is preset automatically. ITALIANO • Current time will not be displayed if the station name has already been preset. Press the MEMO button to memorize the broadcast. • You can preset up to 30 FM and 30 AM (MW) channels. 1. Press the SLEEP button. 2. Each press of the button changes the time indication by 10 minutes. Check the preset broadcast by pressing the PRESET UP/DOWN button. (Released condition) NOTES: fi SLEEP 120 fi SLEEP 110 fi … fi SLEEP 010 fi SLEEP … • In FM Automatic Memory Presetting, frequency is automatically memorized. The setting which has better reception will be preset first. • If the new broadcast channel is preset to a channel, the channel which had been preset to that position earlier will be automatically erased. If you press the TUNING UP/DOWN button after pressing the SLEEP button, you can adjust the time by one minute at a time. • It is impossible to preset automatically in areas far away from the broadcast station or in mountain areas where received signals are weak. 3. Five seconds after presetting the sleep time, the system will return to the previous status and thereafter begin sleep timing. To cancel the SLEEP (timer), turn the power off. SVENSKA 2. PRESET CALL PORTUGUÊS “SLEEP 120” is shown on the front display. NOTES: • To allow the sleep function to work properly, you need to connect the remote control terminal of the tuner to the corresponding remote control terminal of the amplifier. 5 DANSK • If you want to know the time remaining until the sleep time, press the SLEEP button once. ENGLISH HOW TO PRESET DAILY RDS Display The ON and/or OFF time can be preset for daily use. 1. Press the POWER button to ON. Before presetting DAILY make sure the power is off. 2. Press the BAND button to select FM. RDS can be displayed only in the FM band. FRANçaIS DAILY Presetting 1. Press the DAILY button. (“DAILY ON --:--” will be displayed for you to set the ON time.) 3. Press the PRESET UP/DOWN button or the TUNING UP/DOWN button to tune to the required broadcast station. • In case the received station is broadcasting RDS, RDS will light up in the Display. • After a while, RDS Data will be displayed automatically. 2. Set the “hour (…)” you want by pressing the TUNING button, and then press the NEXT button. “Minute” signal will blink. 4. Press the DISPLAY button. DEUTSCH After you set the “minute (--)” you want in the same way as for “hour”, the display will show “DAILY OFF --:--” which indicates the OFF time. Set the OFF time in the same way as you set the “ON” time. Each time you press the button (within 0.5 second), the modes will change as follows regardless of the current mode: 3. Press the DAILY button or NEXT button to complete presetting. Then, the display will return to the previous status before presetting was performed. fi PS fi CT fi PTY (1) PS mode: “PS” will blink for about 4 seconds in the display. • If you do not receive PS Data even after switching the mode to call it up, “NO PS” will be displayed until the data is received. • When the data is received, the corresponding PS will be displayed. 4. Press the TIMER button to turn on he timer. ESPAÑOL NEDERLANDS NOTE: If you turn off the power intentionally before the “OFF” time, the DAILY presets will be cancelled. (2) CT mode: “CT” will blink for about 4 seconds in the display. • If you do not receive CT Data even after switching the mode to call it up, “NO CT” will be displayed until the data is received. • When the data is received, the corresponding CT will be displayed. RDS (Radio Data System) 1. RDS provides such information as station names, local times, the types of program, etc. for FM broadcasting. 2. You can receive the following kinds of data with this system. • PS (Program Service Name): displays FM station name. • CT (Clock Time): displays the information about times provided from the station. • PTY (Program Type): These data on program type will be displayed while receiving FM. (3) PTY mode: “PTY” will blink for about 4 seconds in the display. The PTY indicator lights. The data is displayed in PTY mode as follows: There are 29 programme categories: NEWS = News service AFFAIR = Politics and current events INFO = Special informative reports SPORT = Sports EDUCATE = Learning and continuation of education DRAMA = Radio plays, literature CULTURE = Culture and society SCIENCE = Programmes about sciences and technology OTHERS = Variety POP = Pop music ROCK = Rock music MOR = Middle of the road music, ’easy-listening’. LIGHT = Light classical music CLASSIC = Serious classical music OTHER = Other music WEATHER = Weather reports, forecasts FINANCE = Financial reports, commerce, trading CHILDREN = Children’s programmes SOCIAL A = Social affairs RELIGION = Religious programmes PHONE IN = Programmes in which the public expresses its view by phone. TRAVEL = Travel reports HOBBIES = Programmes concerning recreational activities JAZZ = Jazz music COUNTRY = Country music NATION M = National music OLDIES = Music from the so-called ‘golden age’ of popular music FOLK M = Folk music DOCUMENT = Documentaries NOTES: • When the reception of broadcasting is rather weak (RDS: Off), “NO RDS” will also be displayed. In such a case, correct the position of the antenna. DANSK SVENSKA PORTUGUÊS ITALIANO • In case the currently received station is not broadcasting RDS, “NO RDS” will be displayed continuously regardless of RDS mode. • If you do not receive PTY Data, “NO PTY” will be displayed. 6 CARE AND MAIN TENANCE 1. Press the POWER button to ON. This section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment. ENGLISH How to Search for Your Desired Program Using PTY Search • Be sure to press the button for more than 1 second regardless of whether RDS mode is on or off. The exterior finish of your ST4000 will last indefinitely with proper care and cleaning. Never use scouring pads, steel wool, scouring powders or harsh chemical agents (e.g., lye solution), alxohol, thinners, benzine, insecticide or other volatile substances as these will mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment gets dirty, wipe the external surfaces with a soft, lint-free cloth. 4. Press the PRESET UP/DOWM button. Select your desired one from among 29 kinds of PTY programs. (The program will blink.) 5. Press the TUNING UP (▲) or DOWN (▼) button. If the equipment becomes heavily soiled: When you press the TUNING button after your desired program is searched, you can continue to search for another program type by increasing of decreasing the frequency from the current one. – dilute some washing up liquid in water, in a ratio of one part detergent to six parts water; – dip a soft, lint free cloth in the solution and wring the cloth out until it is damp; NOTES: • When the same program type is not found in PTY Search mode, searching will stop and search mode will be released automatically. REPAIRS WHEN TO USE RESET SWITCH Only the most competent and qualified service technicians shoud be allowed to service your unit. Marantz and its factory trained warranty station personnel have the knowledge and special equipment needed for the repair and calibration of this precision instrument. • When this system is subjected to an electrical shock. • When the power is irregular. In the above cases, function buttons may not often operate or the display may operate wrongly. In these cases, try the following: In the event of difficulty, call the proper toll-free telephone number listed on the face of the warranty to obtain the name and address of the Marants Authorized Service Center nearest you. In many cases, the dealer where you purchased your Marants unit may be equipped to provide service. Please include the model, serial number of your unit together with a copy of your purchase receipt and a full description of what you feel is abnormal in its behaviour. — Rear panel — RESET SWITCH L Press the RESET switch lightly once or twice with a pencil or a ballpoint pen. GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: – disconnect the plug from the AC line supply – after waiting at least three minutes, reconnect the plug to the AC line supply – re-attempt to operate the equipment PORTUGUÊS TROUBLESHOOTING ITALIANO RESET Memory backup DANSK • In case a power outage occurs or the power cord is accidentally unplugged, the ST4000 is equipped with a backup function to prevent memory data such as the preset memory from being erased. The memory funcitons are backed up for up to about one week. SVENSKA R ESPAÑOL – dry the equipment by wiping it with a dry cloth. NEDERLANDS – wipe the equipment with the damp cloth; • If the same program type is not found during PTY Search, it will stop at the beginning frequency. LINE OUT DEUTSCH CLEANING OF EQUIPMENT EXTERNAL SURFACES 3. Press the DISPLAY button for longer than 1 second. “Search” will blink in the display. FRANçaIS 2. Press the BAND button to select FM. 7 General Power Requirements .................................................................................... 230 V AC, 50 Hz Power Consumption .......................................................................................................... 6W Dimensions (W · H · D) .......................................................................... 440 · 72 · 290 mm MAX Dimensions (W · H · D) ................................................................. 440 · 87 · 300 mm Weight (net) ................................................................................................................... 2.9 kg Accessories AM Loop Antenna · 1, FM Antenna · 1, RCA pin plug cord · 1, Remote control Cable · 1 ENGLISH FRANçaIS DEUTSCH NEDERLANDS SVENSKA Improvements may result in specifications and features changing without notice. DANSK • ESPAÑOL AM Section Tuning Range ................................................................... 522 kHz - 1,620 kHz (9 kHz steps) Usable Sensitivity (IHF) .................................................. 55 dB/m (562 mV/m, Loop Antenna) Selectivity .................................................................................................... 30 dB (at –9 kHz) Image Response Ratio .................................................................................................. 35 dB IF Response Ratio ......................................................................................................... 60 dB Distortion ....................................................................................................... 1% (at 85 dB/m) Signal-to-Noise Ratio ................................................................................ 50 dB (at 94 dB/m) Output (Level/Impedance) ......................................................................... 170 mV/2.2 k ohm ITALIANO FM Section Tuning Range ................................................................................... 87.50 MHz - 108.0 MHz Usable Sensitivity (IHF) Mono ...................................................................................... 10 dBf 50 dB Quieting sensitivity Mono ....................................................................................................................... 17 dBf Stereo ..................................................................................................................... 33 dBf Alternate Channel Selectivity (98 MHz – 400 kHz) ........................................................ 65 dB Image Response Ratio .................................................................................................. 60 dB Frequency Response .............................................................. 20 Hz - 15 kHz, +0.5 dB/- 3 dB Capture Ratio ..................................................................................................... 2 (at 98 MHz) Distortion (at 65 dBf, 98 MHz) Mono ......................................................................................................................... 0.2% Stereo ....................................................................................................................... 0.3% Signal-to-Noise Ratio (at 65 dBf, 1 kHz) Mono ........................................................................................................................ 70 dB Stereo ...................................................................................................................... 65 dB AM Suppression Ratio ................................................................................................... 80 dB Stereo Separation (1 kHz) ............................................................................................. 40 dB Output (Level/Impedance) ......................................................................... 600 mV/2.2 k ohm PORTUGUÊS MODEL ST4000 SPECIFICATIONS 49 ENGLISH FIGURES r u !2 y TUNER ST4000 SLEEP TIMER TIME ADJUST (RBDS) (RDS) RT TA PTY TP STANDBY PRESET CH. SLEEP AM ST. NAME i !0 FM MW NEXT MEMO !1 !3 TUNING UP DOWN PRESET BAND UP TUNED STEREO MEMORY SIGNAL KHz MHz t ESPAÑOL DAILY FM MODE DOWN FL-DISPLAY r z x c v ITALIANO POWER ON / STANDBY DISPLAY !4 DEUTSCH o NEDERLANDS w e TUNED PRESET CH. SLEEP AM FM MEMORY SIGNAL KHz MHz n m , . DANSK b STEREO PORTUGUÊS RDS RT TA PTY TP SVENSKA q FRANçaIS CONTROLS AND FUNCTIONS 50 ENGLISH DEUTSCH CAUTION:Do not plug the power cord of any component into AC outlets and do not turn their POWER switches on until connections have been performed. FRANçaIS BERORE USE Lead-type FM Antenna(75Ω) (provided) AM(MW)Outdoor Antenna 5 to 12m AM(MW)Indoor Loop Antenna (provided) Tuner LINE OUT ANTENNA AM GND REMOTE CONTROL IN PRESET ESPAÑOL L OUT R RCA Pin Plug Cord (Plovided) RCA Pin Plug Cord (Plovided) To AC Outlet ITALIANO FM (75 ) NEDERLANDS Roof-top FM Antenna(75 ohms) Matching Transformer (optional) SYSTEM 1: MINIMUM 8 OHMS SYSTEM 2: MINIMUM 8 OHMS SYSTEM 1 AND 2: MINIMUM 16 OHMS SPEAKER SYSTEMS 1 R CD PHONO TUNER AUX TAPE 2 IN OUT L AC OUTLETS AC 120V 60HZ REMOTE CONT. TAPE 1 IN OUT IN L L R R OUT R L SWITCHED 1.0 A 120W MAX UNSWITCHED 1.0 A 120W MAX PORTUGUÊS Stereo Amplifier DANSK SVENSKA SPEAKER SYSTEMS 2 51
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:05:14 16:15:47 Producer : Acrobat Distiller 3.0b1JÅiPower Macintosh î Åj Subject : 1 Creator : Adobe PageMaker 6.53 Author : Title : 1 Modify Date : 2001:05:14 16:20:00+09:00 Page Count : 9EXIF Metadata provided by EXIF.tools