Margaritaville Dm3000 000 Owners Manual

DM3000 to the manual 0ae6a9f8-ac6d-46f7-bcfd-c0cdddb43866

: Margaritaville Margaritaville-Dm3000-000-000-Owners-Manual margaritaville-dm3000-000-000-owners-manual margaritaville pdf

Open the PDF directly: View PDF .
Page Count: 16

i

TT

T

T

h

h

h

h

h

h

eee

e

e

e

N

N

N

N

N

N

aaaa

a

vvvv

v

i

i

i

i

i

gg

g

g

aa

a

a

a

a

t

t

t

t

t

o

o

o

o

o

rr

r

r

r

Model DM3000 Series User Manual

Tahiti™

TheBestMargaritasComeFromMargaritaville

The Best Margaritas Come From Margaritaville®

FROZEN CONCOCTION MAKER

FROZEN CONCOCTION MAKERTM

We know you are excited to start making fabulous Frozen Concoctions…

so please take a moment to read these important safeguards and instructions

before you begin. Be safe. Have fun. And enjoy!

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING

THE FOLLOWING:

1. READ ALL INSTRUCTIONS BEFORE USING.

2. To protect against electric shock, do not immerse appliance,

cord or plug in water or other liquids.

3. Close supervision is necessary when any appliance is used near

children. This appliance should not be used by children.

4. Unplug from outlet when not in use, before putting on or taking

off parts, and before cleaning.

5. Flashing light indicates ready to operate. Avoid any contact with

blades or moveable parts.

6. Do not operate any appliance with damaged cord or plug, after

the appliance malfunctions, or is dropped or damaged in any

manner. Contact 1-877-689-2737 for customer service.

7. Do not use outdoors.

8. Do not let cord hang over the edge of a table or counter or touch

hot surfaces, including the stove.

9. Keep hands and utensils out of container while blending and/or

ice shaving to reduce risk of severe injury to persons or damage

to the unit. A rubber spatula may be used but must be used only

when the appliance is not running.

10. BLADES ARE SHARP; handle with caution. Sharp blades are

located in the main Ice Reservoir as well as in the bottom of

each Blending Jar.

11. Always operate appliance with Jar Lid and Ice Reservoir Lid

in place.

12. The use of attachments, including canning jars, not recom-

mended by the manufacturer may cause a risk of injury to

persons.

13. Do not use broken or cracked Blending Jar or Ice Reservoir.

IMPORTANT SAFEGUARDS

-1-

14. To reduce risk of injury to persons, never place a Blending

Blade Assembly on the base of a Blending Station without a

Blending Jar properly attached.

15. Do not leave appliance unattended while it is operating.

16. To disconnect, turn control to Off, then remove plug

from wall outlet.

17. Do not use appliance for other than intended use.

18. Never place fi ngers or other utensils into feed or

discharge areas.

19. Check Ice Reservoir for presence of foreign objects

before using.

20. Be certain the Jar Lid(s) and Ice Reservoir Lid are securely

locked in place before operating appliance.

21. Do not blend hot liquids.

NOTE: NEVER SHAKE OR REMOVE BLENDER JAR

DURING OPERATION AS JAR BLADE ASSEMBLY

CAN GET DAMAGED.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

Polarized Plug

This appliance has a polarized plug (one blade is wider than the

other). As a safety feature, this plug will fi t in a polarized outlet

only one way. If the plug does not fi t fully into the outlet, reverse

the plug. If it still does not fi t, contact a qualifi ed electrician. Do

not attempt to defeat this safety feature.

-2-

Welcome to

Margaritaville®

Margaritaville® isn’t a place,

it’s a state of mind … it is an escape from the everyday!

The Margaritaville® “Tahiti™” Frozen Concoction Maker™

makes it a short trip from here to there, where you can put on

your no-worries attitude and enjoy a perfectly prepared,

restaurant-style frozen drink.

The “Tahiti™” instruction manual was developed to help quickly familiarize you with your

Frozen Concoction™ Maker. You’re just a few short steps away from Margaritaville,

® enjoying a

perfectly prepared frozen drink. To learn more about Margaritaville® products, please visit us at

www.margaritavillecargo.com.

TABLE OF CONTENTS

Important Safeguards

p.3, 4 Parts List

p.4 The Control Panel

p.5 Making Frozen Drinks

p.6 Recipes

p.7 Adding Drink Ingredients

p.7 Starting the Automated Shave-n-Blend Cycle

p.8 Perfecting you frozen Concoction

p.10 Cleaning & Maintenance

p.12 Troubleshooting

p.13 Warranty Information

-3-

Frozen Concoction

Maker™

PARTS LIST

1. Ice Reservoir Lid – Covers the Ice

Reservoir.

2. Ice Reservoir – Holds the ice for

making frozen drinks.

3. Hopper Cover – Keeps ice

contained in the hopper.

4. Integrated Thumbscrew Lock with

Shaving Paddle assembly – Moves

ice across the Shaving Blade.

DO NOT SEPARATE INTEGRATED

THUMBSCREW FROM ICE PADDLE.

5. Ice Hopper – Holds the Ice

for shaving.

6. Ice Shaving Blade with defl ector –

Shaves ice.

7. Shaving Blade Assembly Nut -

Holds Shaving Blade in place.

8. Rotating Ice Chute – Rotates to

direct ice from Ice Hopper into

Blending Jars.

9. Blending Station (3) – Three

stations available to create frozen

drinks.

10. Blending Base – Holds the three

Blending Jars securely in place.

11. Control Panel – Contains the

controls to make frozen drinks.

12. Recipe Drawer – Stores drink

recipe card.

1

2

4

8

9

10

12

5

11

76

3

-4-

tahiti™ DM3000 Series

Control Panel

1. START Button – Begins and stops the

automatic Shave-n-Blend™ cycle.

2. White LED Lights (3) – Indicates that

a Blending Jar is seated fi rmly in place

and a drink has been selected for that

Blending Station.

NOTE: LED LIGHT WILL BLINK WHEN

THE SHAVE-N-BLEND™ OR

MANUAL CYCLE IS RUNNING AT

THAT STATION.

3. Manual SHAVE/BLEND Toggle Switches

(3) – Used to manually operate ice shaver

& blender to customize the thickness of

each Blender Jar of drinks.

4. DRINK SELECTION Rotary Switches (3) –

Used to select the type of drink to be made

at each Blending Station.

5. Power Indicator Light - Flashes when

unit is plugged in and power switch is on to

indicate unit is ready for use.

NOTE: FLASHING LIGHT INDICATES

READY TO OPERATE. AVOID ANY

CONTACT WITH BLADES OR

REMOVABLE PARTS.

13. Jar Lids (3) – Seals the Blending Jars.

14. Plastic Jars (3) – To blend frozen drinks;

maximum capacity of 24 oz. each.

15. Blending Jar Sealing Rings (3) – Seals

the Blending Jars and Blending Base.

16. Blending Blades (3) – Blends ice and

ingredients to create frozen drinks.

17. Blending Jar Bases (3) – Secures the

blending blade to the blender jar.

18. Ice Melt Reservoir – Holds melted ice

run off.

19. Power Cord Storage Door – Covers

power cord storage area.

20. On/Off Power Switch – Turns the unit

on or off.

17

18

19

20

14

15

16

13

1

2

3

4

5

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

-5-

preparing the unit for use

1. Place the unit on a clean, dry, fl at surface.

2. If Ice Reservoir is not yet installed, place the Ice Reservoir

on the unit front fi rst, then push down fi rmly on the back to

click it into place. (Figure 1)

NOTE: IF THE ICE RESERVOIR IS NOT SEATED FIRMLY IN

PLACE, THE SHAVER UNIT WILL NOT OPERATE.

3. Remove the Power Cord Storage Door at the back of the unit

by pushing down on the release tab. Remove the Power Cord

and plug into a standard 120-volt socket (Figure 2). Replace the

Power Cord Storage Door, and position the Power Cord in the

slot provided.

Adding Ice to the Ice

Reservoir

4. Remove the Ice Reservoir Lid by rotating it

counter-clockwise and lifting up. (Figure 3)

5. Fill the Ice Reservoir with ice cubes to the

“Ice Level” Line (Figure 4).

NOTE: FOR BEST RESULTS, USE ICE THAT HAS BEEN

OUT OF THE FREEZER FOR 10 TO 15 MINUTES.

6. Replace the Ice Reservoir Lid by rotating it clockwise

back into place. (Figure 5)

Making frozen

drinks

And now for the fun part! You are just a few short steps away from enjoying your perfectly

blended, restaurant-style frozen drink. Before you use your Frozen Concoction Maker™

for the f irst time, we recommend that you read through these simple steps to get to know the

features of this unit. Before you know it, you’ll be whipping up perfect drinks for your guests!

-6-

The Best

Concoction

recipes

C = cups Tbs = tablespoons

Ingredients

Margaritas (Ritas)-24 fl uid oz.

fl oz ml

Margaritaville® Gold Tequila 22⁄3 80

Triple Sec 2⁄3 20

Lime Juice 11⁄3 40

Orange Juice 11⁄3 40

Margaritaville® Margarita Mix 22⁄3 80

Ingredients

fl oz ml

Sugar 2 60

Mint Leaves 8 to 10 leaves

Soda Water 3 90

Light Rum 22⁄3 80

Sweetened Lime Juice 2 60

Frozen Mojito Slush-24 fl uid oz.

Ingredients

fl oz ml

Light Rum 3 90

Sugar 2Tbs 30

Cranberry Juice 6 180

Frozen Strawberries 11⁄3C 315

Strawberry Daiquiris (Daiquiris)-24 fl uid oz.

Ingredients

fl oz ml

Rum 2 60

Cream of Coconut 22⁄3 80

Pineapple Juice 22⁄3 80

Piña Coladas (Coladas)-24 fl uid oz.

fl oz ml

Bailey’s Irish Cream 22⁄3 80

Kahlua 22⁄3 80

Vanilla Ice Cream 8Tbs 118

Chocolate Syrup 11⁄3 40

Ingredients

Mudslides (Slides)-24 fl uid oz.

fl oz ml

Raspberry Sherbert

Ice Cream 8Tbs 118

Pineapple Juice 6 180

Fresh Strawberries 1C 236

Ingredients

Smoothies-24 fl uid oz.

-7-

Adding Drink Ingredients to

the Blending Jars

7. Lift and remove the three Blending Jars

NOTE: AT THE CENTER BLENDING STATION,

THE ICE CHUTE IS SPRING-LOADED

AND WILL RETRACT WHEN REMOVING THE

BLENDING JAR.

8. Remove the lid of each Blending Jar.

9. Pull out the Recipe Drawer to refer to

drink recipes.

10. Add ingredients to each Blending Jar

based on the type of drinks you will be making at

each Blending Station to be

used for this cycle.

NOTE: DO NOT OVERFILL INGREDIENTS AS IT CAN

CAUSE OVERFLOW

11.

Turn the main On/Off Switch (located at the right back side of the unit) to the

ON position.

The main Power Indicator Light will illuminate and fl ashes.

12. Replace each Blending Jar Lid, and return each Blending Jar to

the respective Blending Station.

Each jar can only be positioned in three

orientations.

NOTE: FOR THE MIDDLE STATION, PUSH UP ON THE RETRACTING ICE CHUTE

WITH THE BLENDING JAR TO SET IT INTO PLACE.

13. For each Blending Station you are using for this cycle, rotate the Drink

Selection switch to match the type of drink you have prepared. The White LED

Light will illuminate for each active Blending Station.

NOTE: FOR ANY BLENDING STATIONS YOU ARE NOT USING IN THIS CYCLE,

LEAVE THE ROTARY DRINK SELECTION SWITCH AT THE “OFF” SETTING

(OR LEAVE JAR OFF THE BASE). THE BLENDING JAR DOES NOT NEED TO

NOTE: THE UNIT WILL AUTOMATICALLY DETECT HOW MANY BLENDING

STATIONS ARE IN USE FOR EACH SHAVE-N-BLEND™ CYCLE AND

WILL ROTATE ONLY TO THE BLENDING JARS THAT ARE ACTIVE.

Starting the Automated

Shave-n-Blend

™

Cycle

14. Start the automatic Shave-n-Blend™ cycle by depressing the START button

in front of the center Blending Station for at least half a second.

NOTE: A DELAY WAS ADDED TO RESTRICT ACCIDENTAL START.

-8-

NOTE: NEVER SHAKE OR REMOVE A BLENDING JAR DURING OPERATION-

BLADE ASSEMBLY WILL BE DAMAGED

15. If all three Blending Jars are in use for this cycle, the Ice Chute will rotate to

the left jar and begin the auto Shave-n-Blend™ function. The unit will shave

ice for the appropriate time (based on the Drink Selection type selected for

that Blending Station). The blending will then start automatically.

NOTE: THE WHITE LED LIGHT WILL BLINK TO INDICATE WHEN

EACH STATION IS IN USE.

16. When the left jar Shave-n-Blend™ function is

completed, the Ice Chute will rotate to the center

jar and begin the auto SHAVE-N-BLEND™ function

based on the Drink Selection type selected for that

Blending Station.

NOTE: AT ANY POINT DURING THE AUTOMATIC CYCLE,

PRESS THE START BUTTON AGAIN TO CANCEL

OPERATION.

17. When the second function is complete, the Ice Chute will rotate to the fi nal

right position and begin the auto SHAVE-N-BLEND™ function based on the

Drink Selection type selected for that Blending Station.

NOTE: DO NOT REMOVE ANY OF THE BLENDING JARS FROM THEIR BLENDING

STATIONS UNTIL THE SHAVE-N-BLEND™ FUNCTION HAS COMPLETED

AT THAT STATION. ONCE AN INDIVIDUAL BLENDING STATION HAS

COMPLETED. THE ICE CHUTE HAS ROTATED AWAY FROM THAT STATION,

THE BLENDING JAR AT THAT STATION CAN BE REMOVED.

18. After the SHAVE-N-BLEND™ cycle is complete at all Blending Stations in use,

an Orange light will illuminate to signal that the Ice Chute is about to move

back into the center position.

NOTE: THE ORANGE LIGHT WILL FLASH FROM THE START BUTTON TO SIGNAL

THAT THE ICE CHUTE IS GOING TO RETURN TO THE CENTER POSITION

(HOME).

OPTIONAL:

Perfecting your Frozen

Concoctions

USING THE MANUAL CYCLE

After the Shave-n-Blend™ cycle is fi nished, you can use the Manual Cycle to

thicken or thin each Blending Jar of drinks to make them just how you like them.

TO THICKEN DRINKS:

• Depress the Manual SHAVE/BLEND toggle switch up or down of the desired

Blending Station for at least two seconds and release if the Chute is not over

the desired station. Ice Chute will rotate to the correct Blending Station and the

Green LED light will fl ash as the Ice Chute is moving.

NOTE: IF THERE ARE NO ACTIONS AFTER THE ICE CHUTE HAS ARRIVED FOR

7 SECONDS AN ORANGE LIGHT WILL FLASH FROM THE START BUTTON

FOR 3 SECONDS TO SIGNAL THAT THE ICE CHUTE IS GOING TO MOVE

BACK TO THE CENTER (HOME) POSITION.

-9-

• When the Ice Chute stops over the desired Blending Station, push the toggle

switch up to the SHAVE position to add more ice to the Blending Jar.

• Release the SHAVE switch when you have added the desired amount of ice.

• To blend in the additional ice, push the toggle switch down for that Blending

Station until the desired consistency is achieved.

• To stop blending, release the toggle switch.

• You can also achieve thicker drinks by reducing any amount of liquid ingredients

for the respective recipe.

TO THIN DRINKS:

• Depress the Manual SHAVE/BLEND toggle switch up or down of desired

Blending Station for at least two seconds and release if the Chute is not over

the desired station. The Ice Chute will rotate to the correct Blending Station and

the Green LED light will fl ash as the Ice Chute is moving.

NOTE: IF THERE ARE NO ACTIONS AFTER THE ICE CHUTE HAS ARRIVED FOR

7 SECONDS AN ORANGE LIGHT WILL FLASH FROM THE START BUTTON

FOR 3 SECONDS TO SIGNAL THAT THE ICE CHUTE IS GOING TO MOVE

BACK TO THE CENTER (HOME) POSITION.

• When the Ice Chute is in position over the selected Blending Station, push the

toggle switch down to BLEND until the desired consistency is achieved.

• To stop blending, release the toggle switch.

• You can also acheive thinner drinks by increasing any amount of liquid

ingredients for the respective recipe.

SERVING YOUR FROZEN CONCOCTIONS

19. To serve:

• Lift and remove each Blending Jar.

• Remove the Blending Jar Lid(s).

• Pour and enjoy!

20. To make more drinks, repeat from

STEP 7, adding more ice to the

Ice Reservoir as needed.

21. During use, periodically check the

Ice Melt Reservoir and empty as needed.

When the Party’s Over

When you are fi nished using the Margaritaville® Frozen Concoction Maker™,

follow these simple steps to remove any remaining ice from the Ice Reservoir.

22. Place an empty Blending Jar in an available Blending Station, then hold that

Station’s toggle switch up on the SHAVE setting until the Ice Reservoir is empty.

WARNING: NEVER PLACE YOUR FINGERS IN THE ICE HOPPER. THE SHAVING

BLADE IS VERY SHARP AND CAN CAUSE INJURY.

23. Turn off the unit and unplug.

24. Empty the Ice Melt Reservoir and wipe dry or allow to air dry.

Figure 3

Figure 2

Figure 1

Figure 4

-10-

IMPORTANT: Your Blending Jars, Shaving and Blending Blades

are subject to wear during normal use. Always inspect

for nicks, chips, or cracks. Always carefully inspect

for broken, cracked, or loose blades. If any of the Jar

or Shaving and Blending Blades are damaged, do

not use. Call our toll-free customer service number,

1-877-689-2737, to obtain replacement parts.

1. Make sure unit is unplugged. Place on a clean dry

surface. Turn the unit so the back is facing you.

Remove the Ice Reservoir Lid by turning clockwise to the

unlock position (Figure 1).

2. To remove the Ice Reservoir, push down on the

Ice Reservoir Release Button (Figure 2). Lift the back of the

Ice Reservoir and remove. This will expose the Hopper Cover,

Shaving Paddle and Ice Hopper.

NOTE: THE SHAVING BLADE IS LOCATED INSIDE THE ICE

HOPPER (FIGURE 3).

WARNING: SHAVING BLADES ARE SHARP. DO NOT

PLACE FINGERS INSIDE THE ICE HOPPER

NEAR THE SHAVING BLADE. BLADE IS SHARP;

HANDLE WITH CAUTION.

3. To remove the hopper cover, simply lift up at either cut out

area in front of the ice hopper release catches. (Figure 4)

4. To remove the Shaving Paddle, unscrew the Shaving

Paddle Thumb Screw counter-clockwise until loosened

(Do not separate from shaving paddle), then remove the

Shaving Paddle by lifting straight up (Figure 4), exposing

the Ice Hopper and Shaving Blade. To reassemble, place

the Shaving Paddle back into position, and screw down the

Shaving Paddle Thumb Screw clockwise until tightened

properly. (Figure 5).

NOTE: THE ICE PADDLE IS KEYED TO MATCH THE SHAFT.

MAKE SURE TO ALIGN PROPERLY TO ASSEMBLE.

NOTE: IF THE ICE PADDLE THUMBSCREW IS TOO TIGHT USE

THE BOTTOM OF MEASURING CUP TO LOOSEN .

5. Press the two Ice Hopper release catches and lift

the Ice Hopper to remove (Figure 6).

PLEASE FOLLOW THE INSTRUCTIONS BELOW TO

SAFELY REMOVE THE SHAVING BLADE ASSEMBLY

FROM THE ICE HOPPER.

Cleaning and

Maintenance

Figure 7

Figure 8

Figure 6

Figure 9

Figure 5

-11-

6. Turn the Shaving Blade Assembly Nut counter clockwise

(to the left), remove the Shaving Blade Assembly, rinse

and dry prior to storage in a safe place (Figure 7).

BE SURE TO RINSE THE SHAVING BLADE AND DRY

THOROUGHLY BEFORE STORING.

7. Carefully lift the Blending Jar(s) straight up to remove.

At the center Blending Station, the Ice Chute is

spring-loaded and can be pushed up. If the Blending Jar

is not easily removed, rock gently and lift. Do not twist.

8. For each Blending Jar, turn the Blending Jar upside

down and unscrew the Jar Base (counter-clockwise

to the left). Carefully remove the Blending Blade, and

Blending Blade Sealing Ring (Figure 8)

WARNING: THE BLENDING BLADE IS SHARP.

HANDLE WITH CARE.

9. To remove the Ice Melt Reservoir hold the unit still

and pull straight out on the handle (Figure 9).

10. Blending Jar Lids, Blending Jars, Blending Blade,

Blending Blade Sealing Ring and Jar Bases can be

safely washed in the top rack of your dishwasher.

Use only top rack. Failure to do so can result in damage.

11. The Ice Reservoir Lid, Ice Melt Reservoir, Ice Reservoir,

Shaving Paddle, Ice Hopper, Ice Defl ector Blade

Assembly, Shaving Blade and Ice Melt Reservoir are only

exposed to ice and water, so they need only be rinsed

with soap and warm water and allowed to air dry.

12. Inspect and clean under Ice Chute with a hot

damp cloth.

13. Use a damp cloth to clean the outside of the unit.

WARNING: UNPLUG UNIT BEFORE CLEANING.

-12-

Troubleshooting

If the Power Indicator Light does not light:

Check that the unit is plugged into a working power outlet.

If liquid leaks from the base of the Blending Jar:

Remove it from the unit and check that the Blending Blade Sealing Ring is

properly installed and that the Blending Jar Base is tightened.

If water leaks from the unit: Empty the Ice Melt Reservoir.

If the Blending Jar overfl ows during the Shave-n-Blend™ cycle:

Follow the drink recipes included in “making frozen drinks” section and make

sure to not exceed the specifi ed total volume.

If the Blending Jar will not sit on the Blending Station:

Remove it from the unit and check for ice on the Blending Base.

WARNING: unplug the unit before removing ice from the Blending Base.

If the unit is in fault mode (fast blinking red status compass rose indicator

light): Check that the Ice Reservoir and Ice Reservoir Lid are properly installed

and in the lock position.

If the drink is too watery: Make sure to follow the recipe guide or manually

shave more ice until the desired consistency is achieved.

If the ice paddle thumbscrew is too tight, use the bottom of the measuring cup

to loosen.

If the Ice Chute seems to be moving slowly or jamming, ensure not to overfi ll

the Ice Reservoir above “ICE LEVEL”.

Do’s and Don’ts

DO NOT Place fi ngers into the Blending Jar or Ice Hopper. The blades in this

unit are sharp and could cause injury.

DO NOT place Blending Jar onto Blending Stations while motor is running. The

spinning Blending Bases could damage the Blending Jars.

DO NOT twist Blending Jar when removing. Simply lift and remove. Twisting the

Blending Jar could loosen the Blending Jar Base causing it to leak.

DO NOT put hot liquid into the Blending Jar. Hot liquids could be ejected during

the blending process causing injury.

DO NOT place ice, frozen foods or very cold liquids into a Blending Jar which

has come directly from a hot dishwasher. The sudden change in temperature

could cause the Blending Jar to crack.

DO NOT place very hot liquids or foods into a Blending Jar that has come

directly from the freezer. The sudden change in temperature could cause the

Blending Jar to crack.

DO Follow the Cleaning and Maintenance instructions prior to your fi rst use

and after subsequent uses.

a

n

g

e in temperature could ca

us

s

s

s

s

e

e

e

e

e

th

th

th

th

th

e

e

e

e

e

e

instructions

pr

r

r

r

r

io

io

io

io

i

r r r

r

r

to

to

to

to

to

y

y

y

y

y

ou

ou

ou

ou

ou

r

r

r

fi fi

fi

fi

fi

rs

rs

rs

rs

rs

t

t

t

t

t

usus

us

us

us

e

e

e

e

e

-13-

1 Year Limited Warranty

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation

(Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period

of one year from the date of purchase, this product will be free from defects in material and workmanship.

JCS, at its option, will repair or replace this product or any component of the product found to be defective

during the warranty period. Replacement will be made with a new or remanufactured product or component.

If the product is no longer available, replacement may be made with a similar product of equal or greater

value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical

functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not

transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance.

JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any

way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent

use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions,

disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the

warranty does not cover: Acts of God, such as fi re, fl ood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express,

implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or

fi tness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability

to use the product including incidental, special, consequential or similar damages or loss of profi ts, or for any

breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential

damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not

apply to you.

This warranty gives you specifi c legal rights, and you may also have other rights that vary from province to

province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

If you have any question regarding this warranty or would like to obtain warranty service, please call 1 877

689-2737 and a convenient service center address will be provided to you.

In Canada

If you have any question regarding this warranty or would like to obtain warranty service, please call 1 800

667-8623 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer

Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation

(Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton,

Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our

Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

-14-

DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE

For product questions:

Sunbeam consumer services

U.S.A. 1-877-689-2737

www.margaritavillecargo.com

© 2008 Sunbeam Products, Inc. doing business as Jarden Consumer

Solutions. All rights reserved.

ProductsMargaritaville® is a registered trademark of Margaritaville®

.

Printed in China P. N. 125215-004