Marklyn Group 70143 Strobestation Wireless User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4022706
Application ID	rEbLJjZZEES5KO/HvglUpw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.19kB (289874 bits)
Date Submitted	2018-09-28 00:00:00
Date Available	2018-10-01 00:00:00
Creation Date	2018-09-26 09:04:32
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2018-09-26 17:04:40
Document Title	ProStrobe EZLINK Wireless Control Hub – Installation Instructions
Document Creator	Microsoft® Office Word 2007
Document Author:	Darryl Eden

User Manual
Shape of product
Front of remote
Back of remote
Battery of remote
Side of remote
Operating instruction
1. After installing the 3V button battery, connect the host power supply and press the button
During the code matching , the lighting product will flash together with the indicator light on the
remote at the same time. After flashing for a few seconds, that is mean the code-matching is
successful.
2.Usage for button
: Turn on and Turn off.
3.Usage for button
: Press this button once, the lighting product changes a flash mode (solid
lighting or flashing...), there are 9 modes in total , If you still press the button , the flash will not stop
and continue to cycle. When the button is not pressed, the current mode is displayed.
4.Usage for button
:Set up for the lighting product on channel 1 , press once will display one of
flash mold.(Similar with button
will be lighting. Press button
),there are 9 mold in total .Press button
, the lighting product
,the lighting will be off.
5.The button 2,3,4 has the same control way as the button 1. Just to control the correspond lighting
product .
6.The remote has 4 channels(1.2,3,4) for the lighting product , and control the flash mold for each
channel separately
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generate, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures: 
● Reorient or relocate the receiving antenna. 
● Increase the separation between the equipment and receiver. 
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. 
● Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
The equipment must not be co-located or operating in conjunction with any other antenna or
transmitter.
Industry Canada (IC)
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Cetappareilestconforme à la norme RSS d'Industrie Canada. Son fonctionnementestsujet aux deux
conditions suivantes:
(1) ledispositif ne doit pas produire de brouillagepréjudiciable, et
(2) cedispositifdoit accepter tout brouillagereçu, y compris un brouillage susceptible de provoquer
un fonctionnementindésirable.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
Déclarationd'exposition aux radiations:
Cetéquipementestconforme aux limitesd'exposition aux rayonnements IC établies pour
unenvironnement non contrôlé.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Darryl Eden
Create Date                     : 2018:09:26 09:04:32
Creator                         : Microsoft® Office Word 2007
Modify Date                     : 2018:09:26 17:04:40+08:00
Producer                        : Microsoft® Office Word 2007
Title                           : ProStrobe EZLINK Wireless Control Hub – Installation Instructions
Has XFA                         : No
Language                        : zh-CN
Tagged PDF                      : Yes
Page Count                      : 3

EXIF Metadata provided by EXIF.tools