MarqMetrix METRIX01 Radio module for industrial sensors telemetry system. User Manual Installation Manualx
MarqMetrix Radio module for industrial sensors telemetry system. Installation Manualx
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3228517 |
| Application ID | o0WVtTFDRN/712BVOyd1PQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 28.85kB (360613 bits) |
| Date Submitted | 2016-12-14 00:00:00 |
| Date Available | 2017-01-12 00:00:00 |
| Creation Date | 2016-11-17 11:21:03 |
| Producing Software | Acrobat Elements 9.0.0 (Windows) |
| Document Lastmod | 2016-11-17 11:21:03 |
| Document Title | Microsoft Word - Installation Manual.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | cbdoughty |
METTRIX01 1 RF Modul le Insttallatio on Gu uide nual describes the installlation of the e METRIX011 RF modulee into end products. No ote: This man The module is to be installed by trained service personnel o only. pproved end d-products only. The module is to be installed into ap n the rangee of 2.7V to 3 The module is to be supplied with DC D voltage in 3.6V The exterior of the final product must be permaanently labeeled with: ains: FCCID: 2AJWF-MET TRIX01 Conta Conta ains: IC: 21890-METRIX0 01 410 West Harrison Street, Suite 200 Seattle e WA 98119-40 034 | 206.971.36625 Pagee 1 of 4 1. Using approp priate ESD precautions, remove thee module fro om its packaaging. 2. Note the orie entation of the t module and the loccation of pin n1. 3. Note whethe er the end-p product has an external antenna. Iff so, carefully align the ccoax ca able with the mating plug on the module. Preess firmly strraight down,, and ensuree the co onnectors la atch securelyy. If the con nnectors aree loose, repllace the antenna assem mbly on the end-p product. 410 West Harrison Street, Suite 200 Seattle e WA 98119-40 034 | 206.971.36625 Pagee 2 of 4 4. Align the module with the target/host PCB such that pin1 aligns with the pin1 marker on the target and the pins line up with the receiving receptacles. 5. Press the module firmly into place such that the pins are fully seated in their mating connectors. 6. Now install batteries and any other connections to the PCB. Secure the external housing and ensure the end-product label is affixed to the outside of the package in a visible location. 410 West Harrison Street, Suite 200 Seattle WA 98119-4034 | 206.971.3625 Page 3 of 4 FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Marqmetrix for compliance could void the user's authority to operate the equipment. Industry Canada Statement: This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure Warning. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter . 410 West Harrison Street, Suite 200 Seattle WA 98119-4034 | 206.971.3625 Page 4 of 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : cbdoughty Create Date : 2016:11:17 11:21:03-08:00 Modify Date : 2016:11:17 11:21:03-08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Microsoft Word - Installation Manual.docx Creator : cbdoughty Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Elements 9.0.0 (Windows) Document ID : uuid:f5e39b98-0b5c-4587-bcfc-462f0e154fa2 Instance ID : uuid:6cf835fa-5d03-413e-bda9-f7f373f9e931 Page Count : 4EXIF Metadata provided by EXIF.tools