Marquardt DC11 Keyless Car Entry Controller User Manual

Marquardt GmbH Keyless Car Entry Controller

User Manual

Annex No.5Page 1 of 11Functional description
Technical DescriptionRemote control vehicle keyBR166PN: B3333D (Basis)PN: K3333D (Keyless Go)
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page2 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.021.1 Operation of BASIC Key1.1.1 Access permission with BASIC KeyThe locking and drive permission system BR166 (3333.4/5) incorporates a function which enables thelocking and unlocking of the doors. There are two separate buttons each one for lock and unlock the vehicle.All vehicles with a boot lid are equipped with a third button for unlocking the boot lid.The key is provided with a fourth button to activate the “PANIC” function for vehicles intended for the USmarket.The function is activated by pushing a button, the method of button pushing determines the functionactivated on the vehicle, e.g. prolonged pressure on the button initiates an IR comfort function.If messages are discharged from the key, the access permission information is sent via radio waves (HF)and redundantly via infrared (IR) from the key to the vehicle. The so-called comfort signals are specialfunctions which require visual contact with the vehicle. Upon pressing the button for an extended period,these signals are sent via IR signal only after the standard access permission message.HF communication via 3-channel operation:The access permission message is sent sequentially on 3 radio channels adjacent to one another within thepermissible ISM band. The radio receiver installed within the vehicle is able to receive the messagedischarged from the key on all 3 channels, evaluate it and send an appropriate control message to thecentral locking system.1.1.2 Drive permission with BASIC KeyAfter the key is pushed into the EZS (electronic ignition switch) a cryptographically, bidirectionalcommunication by infrared light is initiated. As there is a successful authorization of the key the engine of thevehicle can be started.1.2 Operation of KEYLESS GO KeyThe KEYLESS Go key model is equipped with all of the BASIC model functions.Additional the KEYLESS GO model only facilitates full utilisation of the drive permission system function onthe vehicle without active operation of the key. This means that one can lock and unlock the vehicle (accesspermission) without operating the key and activate and deactivate the immobiliser (drive permission) withoutplacing the key in the ignition switch. It is only necessary to carry the key in order to be identified as anauthorised vehicle user.In addition to the basic variant, the keyless go key is expanded to include an LF receiver component,comprising of inductive antennae which create the three spatial directions x, y and z, and an associated LFreceiver ASIC. Additionally, the keyless go variant of the key is equipped with a special HF ASIC, whichfacilitates bidirectional HF communication.
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page3 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.021.2.1 Access permission with keyless entryThe keyless access permission (keyless entry) is initiated by the vehicle user activating the vehicle doorhandle. This causes the vehicle to send an inductive wake up message. On receiving this, the key starts inactive mode.The vehicle now sends further unmodulated, inductive fields which enable the key to ascertain its position inrelation to the vehicle on the basis of field strength measurements.Bidirectional HF communication follows, in which cryptographically encrypted authentication data istransferred between the key and the vehicle.If the key is outside the vehicle, the vehicle is locked or unlocked following transferral of the correct data.1.2.2 Drive permission with keyless goIn principle, when activating the start/stop button for a keyless engine start, the same process runs as thatdescribed for access permission of the BASIC model. The difference here is that the key must be locatedinside the vehicle, but needs not to push into the EZS (electronic ignition switch).The presence of the key inside the vehicle is verified on every 5km driven, and on driving away. Theprocess that runs here is similar to the engine start process, although shorter.The cryptographically encrypted authentication between key and vehicle is accomplished by a bidirectionalRF communication.1.2.3 LF / HF transferralThe inductive wake-up message is sent in a phase-modulated (PSK) format through the vehicle on thefrequency 21.845 kHz with a data rate of 5.461 kBd.With respect to bidirectional HF communications, these are processed in a frequency-modulated (FSK)format, in the ISM band on 433.92 MHz in Europe and 315 MHz in the USA. The rate of data transferral is 10kBd.1.2.4 Operating frequencies of HF transferral1.2.5 1-channelIn 1-channel operation, the mid-frequency of the channel is:ECE: 433.92 MHzUSA, Japan: 315.00 MHz
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page4 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.021.2.5.1 3-channelThe following table shows the mid-frequency of the individual channels for each frequencyband.Channel nameChannel mid-frequencyName AbbreviatedIDChannel 1 CH1 USA: 314.00 MHzECE: 433.47 MHzChannel 2 CH2 USA: 314.90 MHzECE: 434.37 MHzChannel 3 CH3 USA: 314.45 MHzECE: 433.92 MHz
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page5 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.021.3 HF protocol1.3.1 3-channel operationTrägerausobereSendefrequenzuntereSendefrequenzNachlaufStart-bitVorimpulse DatenTräger einschalten"0" "0""0" "0""0" "1" "X"X = beliebig(abhängig vom Dateninhalt)0 msStop-bit"1""X""X" "X"dd+e-b-c-a-b-c d+e+f- -cab c d e fhKanal-umschaltung Start-bitVorimpulseTräger einschalten"0" "0""0" "1"ab cgd+e+f+g a+d+e+f+ga+b+d+e+f+ga+b+c+d+e+f+gftCH 1CH 2CH 3mi = a + b + c + d + e + fNachlaufStop-bit"1"efKanal-umschaltung Start-bitVorimpulseTräger einschalten"0" "0""0" "1"ab cgDatendNachlaufStop-bitefNachlaufStop-bit"1"efdNachlaufStop-biteftp12 p23p13i iParameter Beschreibung Zeitzul.ToleranzaTräger einschalten auf unterer Sendefrequenz 0,150ms ±50µsbVorimpulse (550 Stück) 55,000ms ±550µscStartbit 0,100ms ±1µsdDaten (120Bit =14Byte + 1Byte Checksumme) 12,000ms ±120µseStopbit 0,100ms ±1µsfNachlauf 0,150ms ±50µsgKanalumschaltung (Träger ausgeschaltet) 0,600ms ±50µshPeriodendauer eines Bit 0,100ms ±1µsi=a+b+c+d+e+f 67,500ms ±772µsp12 =d+e+f+g+a+b+c+d+e 80,200ms ±943µsp23=f+g+a+b+c+d+e68,100ms±822µsp13=p12+p23148,300ms±1.765µsmFunkprotokoll gesamt (=2*g+3*i) 203,700ms ±2.416µs
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page6 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.021.3.2 1-channel operation
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page7 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.021.4 Technical data1.4.1 General HF specificationOperating frequencies, toleranceSingle channel operation:fop1 = 315MHz (USA, Japan)fop2 = 433.92MHz (ECE)3-channel operation:fop1 = 314.00MHz / 314.45MHz / 314.9MHz (USA, Japan)f op2 = 433.47MHz / 433.92MHz / 434.37MHz (ECE)Temperature shift –20to +65C: +/-35ppmAgeing: +/-10ppmRemaining deviation after adjustment: +/-2ppmVoltage dependency and drift XTO: +/-3ppmTotal tolerances remaining afteradjustment of the initial frequency +/-50ppm1.4.2 Specification of the HF transmitterTransmission power EIRP:ECE*: -14,4dBm….-22dBmUSA/Canada ** -19.6dBm….-24dBmJapan(TELEC-T244)***: -19.6dBm….-24dBm* maximum transmission power limit Taiwan : 80.83dbµV/m at a distance of 3m.With isotopic propagation, the maximum transmission power is –14.4dBm.** maximum transmission power limit according to FCC section15/Canada RSS-210:3.75…12.5mV/m in the 260-470MHz range at a distance of 3mAt 315MHz the figure is 6.042mV/m, which relates to a transmission power of –19.63dBm withisotopic propagation.*** Use of the USA varianttaken from the new TELEC-T244 Japanese standardLimit max. 25µW with transmission frequency of up to 315.25MHz, this relates to -16dBmUse of the USA variant
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page8 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.02Settling time for the transmission frequency (PLL)tStartUp = 500µstlock 200µs with Δf = 600kHz with ferror 10kHzModulation, baud rate:Single channel operation: 10 kBaud Manchester keyless go3-channel operation: 10 kBaud ManchesterTolerances:  1.0 %Modulation type, range: 2-FSK: +/-15kHz to +/-17kHz basic key2-FSK: +/-15kHz to +/-21kHz keyless go keyEmitted interferenceoHarmonics & spurious315MHz: : -49dBm @ 960MHz (*: -41dBm @ > 960MHz (**(* This reflects the limit of 200µV/m as per FCC section 15, with isotopic propagation(**This reflects the limit of 500µV/m as per FCC section 15, with isotopic propagation433.92MHz:: -36dBm @ 1 GHz -30dBm @ > 1GHzall frequency bands: -54dBm @ UKW & TV bands (EN300220)47 -74MHz87.5 –118MHz174 –240MHz470 – 862MHzModulation quality: Overshoot: Max. 100% of the nominal valueMax. duration of the overshoot:6µs at 10 kBaudBuild / fall times: 0 % to 100% nominal value:6µs at 10 kBaudThe shift times are determined with a measuring receiver, the reception bandwidth of which lies as close aspossible to the receiver in the application:Remote Keyless Entry: BWRx= 600kHzKeyless go operation: BWRx= 200kHz
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page9 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.021.4.3 Specification of the HF Receiver (Keyless Go only)Receiversensitivity with loop antenna Psens :≤-75dBmReceiver bandwidth: typ. 220kHzLO- spurious < 1GHz: <-57dBmLO- spurious > 1GHz: <-47dBm1.4.4 Specification of the 3D-LF Receiver (Keyless Go only)3 parallel X-/Y-/-Z-axis straight foreward LF-receiver with 3D inductive antennaRX-frequency: 21,845 kHzRx-data rate: 5,461kBaud
MARQUARDT GmbHSchloßstraße 16D 78 604 Rietheim – WeilheimFirst Draft 23.10.2009 Version 1.02Department APDA1-RI FileEditor U. Schwalm Doc.-No.Date 25.02.2010 Page Page10 von 10Vehicle Key BR166 – technical Description.Weitergabe sowie Vervielfältigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrücklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere für den Fall der Patenterteilung oder GM-Eintragung...Proprietary data, company confidential. All rights reserved.Confié à titre de secret d'entreprise. Tous droits réservés.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos..form 659.02HistoryV1.0 23.10.2009 First draftV 1.01 09.11.2009 1.41/1.42 EEPROM at block diagram

Navigation menu