Marshall Amplification Guvnor Plus Gv 2 Users Manual

Marshall-Guvnor-Plus-Gv-2-Users-Manual-469118 marshall-guvnor-plus-gv-2-users-manual-469118

GV-2 to the manual d61904f2-188e-00f4-697d-36e53d68768d

: Marshall-Amplification Marshall-Amplification-Guvnor-Plus-Gv-2-Users-Manual-553545 marshall-amplification-guvnor-plus-gv-2-users-manual-553545 marshall-amplification pdf

Open the PDF directly: View PDF .
Page Count: 5

GV-2 Guv’nor Plus

Guv’nor Plus Suggested Settings

Owners Manual

FAT BLUES (Amp: Clean)

CRUNCH (Amp: Clean)

GRUNGE / HARDCORE (Amp: Clean)

SCREAMING SOLO (Amp: Clean)

Whilst the information contained herein is correct at the time of

publication, due to our policy of constant improvement and

development, Marshall Amplification plc reserve the right to alter

specifications without prior notice.

7 / 05

Marshall Amplification plc

Denbigh Road, Bletchley, Milton Keynes,

MK1 1DQ, England.

Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118

www.marshallamps.com

WARNING!

IMPORTANT Precautions

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

WARNING

Do not expose the apparatus to rain or moisture. Do not expose

the apparatus to dripping or splashing. No objects filled with

liquids should be placed on or near the apparatus. Do not use

this apparatus near water.

Clean only with dry cloth.

Changes or modifications not expressly approved by Marshall

Amplification plc could void the user’s authority to operate the

equipment.

Heed all warnings.

Follow all instructions.

Keep these instructions.

European Product Only

1

2379

5

6

11

10

4 8

From The Chairman

I would like to personally thank you for

selecting one of our effects pedals.

For over 40 years the Marshall name has been synonymous with

the greatest guitar tones in music. We have worked hand in hand

with guitarists from all levels throughout the world to maintain

and improve that special ingredient, ‘The Marshall Sound.’

Our range of effects pedals gives the opportunity to augment the

classic Marshall tone to add Marshall character to a guitar set-

up.

All our pedals are made with the same utmost attention to

quality, in both materials and manufacture as our world

renowned amplifiers, cabinets and combos, in order to provide

you with optimum reliability and tone.

I would like to wish you every success with all of your musical

endeavours and also your new Marshall effects pedal, which I am

sure you will find a pleasure to play for many years to come.

Yours Sincerely,

1

ENGLISH

2

Introduction

Launched in the 1980’s, the original Guv’nor became a classic

footpedal known for high quality distortion tones. Much loved by

pros, semi-pros and amateurs alike, the Guv’nor earned itself a

special place in the hearts of distortion smitten guitarists the

world over.

The new Guv’nor Plus is an updated version of the original

Guv’nor. Within the sturdy metal housing lies the tone, feel and

sound of the original Guv’nor, but with extra features specially

designed to add extra power and flexibility to cope with the

exacting requirements of today’s musicians. The tonal versatility

of the Guv’nor Plus is such that it is like adding another Marshall

amp to your existing set-up.

The expanded Gain structure allows you to steer your guitar tone

through many different styles. From natural sounding vintage

valve amp break-up, ideal for singing blues, to chunky JCM 800

classic rock tones, right through to modern day super-saturation,

for liquid sustain and grinding chords. In addition you will also

find a Deep control which adds a resonant bass boost, giving

you similar feel and response to the resonant thump of a

Marshall 4 x 12 cabinet.

The Guv’nor Plus features a passive bypass for the main signal

path to ensure complete tonal integrity and has a quality of tone

matched only by its versatility.

This booklet provides a complete run down of the Guv’nor Plus’s

features for your information. We have also included a number of

suggested settings to help guide you. It should be remembered

that these are only a starting point and you should really

experiment.

When you take the time to explore the many different overdrive

and distortion characters of the Guv’nor Plus, you won’t be

disappointed.

Features

1. Out Jack

This is the output of the Guv’nor Plus and is for connection to

the amplifier or to another effects pedal.

2. Gain

This increases the amount of distortion, taking you from vintage

breakup, ideal for big crunchy chords and sweet singing blues,

to full on grind with super saturation. The Guv’nor Plus features

the classic Marshall 3 way tone network to guarantee true

Marshall tone at all times and to allow you to add unique

Marshall character to any rig.

3. Bass

Adjusts the bass frequencies in your tone. Increasing the

Always use good quality shielded leads.

Always use 9V regulated DC supply with centre negative.

Although it may seem obvious the first action in achieving a

good effected sound (be it duration / compression etc.) is to

find the perfect bypassed sound. This will then allow the correct

level to be set with the effect unit to allow a cut or boost in

volume and a realistic tone.

On clean channels it is advisable to set the gain (or volume) to a

setting of no less than one quarter maximum so as not to get

unrealistic results due to any volume dependent tonal shaping

on the amplifier preamp.

Setting Up

3

ENGLISH

54

ENGLISH

amount of bass will generally make your tone warmer and thicker

at the bottom end.

4. Deep

This adds an active resonant bass boost to your tone in a way that

can’t be replicated with traditional tone controls and has a similar

effect to the acclaimed JCM2000 “Deep” switch. Increasing the

amount of Deep will add masses of tight bottom end to your tone

giving it real low end resonance and incredible fullness.

5. DC Input

For input of a 9V DC negative regulated power supply should you

not wish to use batteries.

6. LED

Indicates when the Guv’nor Plus is in operation.

7. Treble

Adjusts the high end frequencies in your tone, an increase making

it brighter, sharper and more cutting.

8. Mid

Adjusts the middle frequencies in your tone. Adding more middle

will fill out your sound and make it fatter. By reducing the amount

of middle in your tone you will make it thinner and sharper.

Cranking the gain (item 2) up and setting the Mid control to

minimum will deliver “scooped” sounds, ideal for brutal crunch

tones.

9. Volume

Adjusts the volume of the Guv’nor Plus. This allows you to cut or

boost your volume when you switch the pedal on and is ideal for

switching from rhythmn to higher volume solo levels. The Volume

levels of the Guv’nor Plus are greater than previously available on

the original Guv’nor to allow you to push the front end of your

amp harder for even more overdrive.

10. In Jack

This is the input jack, for connection directly from your guitar or to

another effects pedal if you are linking pedals together.

11. Foot Switch

For switching the Guv’nor Plus on and off.

WHAT IF

NO

OUTPUT

SOUND TOO

TREBLY OR

FIZZY

UNUSUAL

HUM

BASS

FEEDBACK

SOUND TOO

MUSHY OR

BASSY

UNUSUAL

FEEDBACK

INDICATOR

LED NOT

ON

NOISE IN

BYPASS

CHECK

BATTERY

CHECK

LEADS

CHECK PEDAL

CONTROLS

DC INLET

CHECK AMP

CONTROLS

CHECK GUITAR

REDUCE

TREBLE

REDUCE

TREBLE

INPUT

LEAD

Trouble Shooting

33

3

3

3

3

3

3333

3

333

3

3

33

333

MOVE AWAY

FROM AMP

PICKUPS

MAY BE

VIBRATING

76

ESPAÑOL

Battery Replacement

1. To replace the battery, open

the easily accessed coin screw

battery cover plate by

loosening screw as shown,

then disconnect the battery

connector lead.

2. Use PP3 or equivalent battery

(for improved battery life use

alkaline type)

3. Always ensure that the battery

is removed when the pedal is

not in use for long periods.

4. Dispose of old battery in a

safe place.

Technical Specification

Power: 9V DC Centre Negative Regulated

Current Draw: 9mA

Controls: Pedal Switch, Gain, Bass, Treble, Volume, Deep & Mid.

Switches: On/Off Switch

Indicators: On/Off LED

Jacks: Input/Output ‘Jacksockets’

Input Impedance: 1MΩ

Output Load Impedance: max 1kΩ

Dimensions: 120mm x 65mm x 55mm

Weight: 510 grammes

Unas palabras

del Presidente

Quiero agradecerte personalmente el haber elegido uno de

nuestros pedales de efectos.

Desde hace más de 40 años el nombre de Marshall es sinónimo

del mejor sonido de guitarra. Hemos trabajado mano a mano con

guitarristas de todos los niveles y de todas partes del mundo

para mantener y mejorar este ingrediente especial: “El sonido

Marshall”.

Nuestra gama de pedales de efectos te da la oportunidad de

aumentar el clásico tono de Marshall o añadir personalidad a

cualquier equipo de guitarra. Están fabricados prestando tanta

atención a la calidad de los materiales como el resto de la gama

de amplificadores y combos Marshall, para ofrecerte gran

fiabilidad y tono.

Quiero desearte grandes éxitos en todas tus empresas musicales

y con tu nuevo pedal de efectos Marshall, que estoy seguro te

resultará un placer utilizar durante muchos años.

Sinceramente,