Marshall Electronic Tft Megapixel Monitor V R70P Sd Users Manual Guide
TFT-MegaPixel Monitor V-R70P-SD V-R70P-SDU
V-R70P-SD to the manual 09bb40ed-1cab-4b94-8ad2-b68002b10094
2015-02-02
: Marshall-Electronic Marshall-Electronic-Tft-Megapixel-Monitor-V-R70P-Sd-Users-Manual-436739 marshall-electronic-tft-megapixel-monitor-v-r70p-sd-users-manual-436739 marshall-electronic pdf
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
10 Switch Settings, Functions and Indicators Marshall Electronics 1910 East Maple Ave. El Segundo, CA 90245 Tel.: 800-800-6608 • 310-333-0606 Fax: 310-333-0688 www.LCDRacks.com Email: sales@lcdracks.com Tally Indicators V-R70P-SD Users Guide Power On/Off switch Illuminates red when system power is present Illuminates Green when monitor is ON Image Adjustment Controls Note: Tint only functions when NTSC Video or S-Video are selected HDSDI/SDI Signal indication Lights for active format Screen aspect ratio switch 4:3 or 16:9 selector and indicators 16:9 Aspect 4:3 Aspect Note: Tapping any active input signal toggles BLUE GUN On/Off. Signal selection is active when Blue Gun is on. Tap active selection to turn off. 11 Warranty Marshall Electronics warranties to the first consumer, that this V-R70P-SD portable monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you. This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve products and product features, specifications may change without notice. © Marshall Electronics • 1910 East Maple Avenue • El Segundo, CA • Product and features subject to change Product Overview 1 Features 2 Standard Accessories 3 Optional Accessories 4 Electrical Specifications 5 Mechanical Specification 6 Faceplate Cleaning 7 Operational Setup 8 Input Connectors 9 Switch Settings, Functions and Indicators 10 Warranty 11 1 Product Overview 7 Faceplate Cleaning The V-R70P-SD features Marshall’s proprietary TFT-MegaPixel™ display system and represents leading edge technology in LCD imaging for broadcast and professional video applications. This is a low cost stand alone monitor and is constructed with a durable enclosure featuring an optical grade polycarbonate protective cover for the antiglare/antireflective screen. A V-Mount battery adapter is also included and the monitor can be powered for over 5 hours with a 50WH battery. The 1.2-million pixel TFT screen has 130 degree viewing angles and incorporates completely digital signal processing to provide image reproduction that exceeds all CRT displays available in a similar form factor. All SMPTE/ITU High Definition and Standard Definition digital video standards and signal types are accepted and displayed on this model. All video formats are scaled to fit on screen in the highest resolution using a state of the art LSI that incorporates 4x4 pixel interpolations with precision Gamma correction to produce the best images available. Additional features include, three LED tally, setup memory, Blue Gun, and direct access for all adjustment and selection functions. 2 Features High Definition Displays Durable metal enclosure Protective Screen Cover Memory Function Capable of displaying more than 900 TV Lines resolution. Standard definition is internally up converted to High Definition. All signals remain completely digital to provide the most exact images available. • SDI (SMPTE-259M) • Analog Composite PAL/NTSC Auto Detect (BNC with loop out) (SMPTE170M) • Y/C (S-video) (4 Pin Mini-din with loop out) • Protection for all connections and controls with strategically placed ventilation for use in harsh environments • Optical grade polycarbonate screen cover with Antireflective / Antiglare coating • Adjustment Settings Memory stored on shutdown and recalled when power is applied Blue Screen Built in color bars Tally (DB-15) • Use for adjustment to SMPTE color Bars • For screen testing purposes • Three LEDs (Red, Green, Amber) produce 7 different tally indications Standard Inputs When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the Polycarbonate faceplate. Paper towels may also leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended. 8 Operational Setup 1. Unpack the V-R70P-SD and accompanying power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606. 2. Connect required cables for signal input and output. Please note that power must be applied to the V-R70P-SD for the SD/SDI outputs to be activated. All BNC connectors should be rated for 75Ω.. 3. Plug the power supply into the A.C. source Please note that power can be supplied from a variety of DC sources, such as batteries or Vehicle power. Input power range is 10.7 to 15 Volt D.C. In operation, the V-R70P-SD will draw approx. 0.8 amp. Attach 4 Pin XLR power connection from V-PS12-V-5 power supply to the back of the unit. 4. Turn on the V-R70P-SD by depressing the power switch located on the front of the unit. 9 Input Connectors 3 Standard Accessories • • • • * Composite Video Inputs comply to SMPTE-170M * Component Inputs comply to SMPTE274M, 294M * Outputs Require Power to be applied for activation * Battery and External Power can not be used simultaneously * Active Outputs require power to be applied. All input signals appear as output signal. Analog output signals are buffered and amplified. Accessories Supplied with the V-R70P-SD Users manual “Brick” type 12vdc power supply with 4 Pin Female XLR connector “V” Mount battery adapter ¼”-20 mounting plate V - Mount Battery Adapter. See Optional Accessory section for a selection of batteries 4 Optional Accessories Stand Camera Hot Shoe Mount V-LCD4-ST Composite Video In Use for table top mount V-LCD4-MT Attaches monitor to camera Tally lamps active when connected to ground 2 Sun Hood V-H700P Use for viewing in bright lighting or outdoors Power Adapter Cable V-PAC-D-XLR Use with Anton Bauer D-type connection Power Adapter Cable V-PAC-XLR-1 Use with 4 Pin XLR connections V-R70P-SD Users Guide S-Video In 4 Pin Din (Female) Pin1 - GND Pin2 - GND Pin3 - Yin Pin4 - Cin S-Video Out 4 Pin Din (Female) Pin1 - GND Pin2 - GND Pin3 - Yout Pin4 - Cout Marshall Electronics 5 1 Product Overview 7 Faceplate Cleaning The V-R70P-SD features Marshall’s proprietary TFT-MegaPixel™ display system and represents leading edge technology in LCD imaging for broadcast and professional video applications. This is a low cost stand alone monitor and is constructed with a durable enclosure featuring an optical grade polycarbonate protective cover for the antiglare/antireflective screen. A V-Mount battery adapter is also included and the monitor can be powered for over 5 hours with a 50WH battery. The 1.2-million pixel TFT screen has 130 degree viewing angles and incorporates completely digital signal processing to provide image reproduction that exceeds all CRT displays available in a similar form factor. All SMPTE/ITU High Definition and Standard Definition digital video standards and signal types are accepted and displayed on this model. All video formats are scaled to fit on screen in the highest resolution using a state of the art LSI that incorporates 4x4 pixel interpolations with precision Gamma correction to produce the best images available. Additional features include, three LED tally, setup memory, Blue Gun, and direct access for all adjustment and selection functions. 2 Features High Definition Displays Durable metal enclosure Protective Screen Cover Memory Function Capable of displaying more than 900 TV Lines resolution. Standard definition is internally up converted to High Definition. All signals remain completely digital to provide the most exact images available. • SDI (SMPTE-259M) • Analog Composite PAL/NTSC Auto Detect (BNC with loop out) (SMPTE170M) • Y/C (S-video) (4 Pin Mini-din with loop out) • Protection for all connections and controls with strategically placed ventilation for use in harsh environments • Optical grade polycarbonate screen cover with Antireflective / Antiglare coating • Adjustment Settings Memory stored on shutdown and recalled when power is applied Blue Screen Built in color bars Tally (DB-15) • Use for adjustment to SMPTE color Bars • For screen testing purposes • Three LEDs (Red, Green, Amber) produce 7 different tally indications Standard Inputs When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the Polycarbonate faceplate. Paper towels may also leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended. 8 Operational Setup 1. Unpack the V-R70P-SD and accompanying power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606. 2. Connect required cables for signal input and output. Please note that power must be applied to the V-R70P-SD for the SD/SDI outputs to be activated. All BNC connectors should be rated for 75Ω.. 3. Plug the power supply into the A.C. source Please note that power can be supplied from a variety of DC sources, such as batteries or Vehicle power. Input power range is 10.7 to 15 Volt D.C. In operation, the V-R70P-SD will draw approx. 0.8 amp. Attach 4 Pin XLR power connection from V-PS12-V-5 power supply to the back of the unit. 4. Turn on the V-R70P-SD by depressing the power switch located on the front of the unit. 9 Input Connectors 3 Standard Accessories • • • • * Composite Video Inputs comply to SMPTE-170M * Component Inputs comply to SMPTE274M, 294M * Outputs Require Power to be applied for activation * Battery and External Power can not be used simultaneously * Active Outputs require power to be applied. All input signals appear as output signal. Analog output signals are buffered and amplified. Accessories Supplied with the V-R70P-SD Users manual “Brick” type 12vdc power supply with 4 Pin Female XLR connector “V” Mount battery adapter ¼”-20 mounting plate V - Mount Battery Adapter. See Optional Accessory section for a selection of batteries 4 Optional Accessories Stand Camera Hot Shoe Mount V-LCD4-ST Composite Video In Use for table top mount V-LCD4-MT Attaches monitor to camera Tally lamps active when connected to ground 2 Sun Hood V-H700P Use for viewing in bright lighting or outdoors Power Adapter Cable V-PAC-D-XLR Use with Anton Bauer D-type connection Power Adapter Cable V-PAC-XLR-1 Use with 4 Pin XLR connections V-R70P-SD Users Guide S-Video In 4 Pin Din (Female) Pin1 - GND Pin2 - GND Pin3 - Yin Pin4 - Cin S-Video Out 4 Pin Din (Female) Pin1 - GND Pin2 - GND Pin3 - Yout Pin4 - Cout Marshall Electronics 5 Optional Accessories (continued) IDX-VL-2Plus 2-channel sequential charger with a built-in 60W power supply. Charges 2 ENDURA E series batteries in fewer than 5 hours. One 10’ XLR cable included. Weighs only 2 lbs IDX-VL-4 Economically charges 4 ENDURA E series batteries in under 6 hours using Full Power Charge (FPC) method IDX-VL-4S Charges 4 ENDURA E series batteries in 2.5 hours or less 55 W Lithium Battery IDX-E50S V-Mount battery pack with 3 LED power Indicator 55 W Lithium Battery with Power Link IDX-E50 V-Mount Battery Pack with PowerLink includes accurate Power Status Display and supports Digi-View 82 W Lithium Battery IDX-E80S V-Mount battery pack with 3 LED power Indicator 82 W Lithium Battery with Power Link IDX-E80 V-Mount Battery Pack with PowerLink includes accurate Power Status Display and supports Digi-View Protective Carry Case V-CC1 Manufactured by Storm Case Analog to Digital Converter BC-0909-AD Converts analog Composite, YC, or component to HDSDI/SDI Digital to Analog Converter BC-0909-DA Converts SDI/HDSDI to analog Composite, YC, or Component video Sequential 2 channel charger Sequential 4 channel charger Simultaneous 4 channel charger Mounting Plate Cleaning Wipes Attaches to any side for mount to ¼-20 threaded component V-HWP-K Package of 10 non-toxic, antistatic, alcohol and ammonia free cleaning wipes. Marshall Electronics 3 5 Electrical Specifications Display (Viewing Area) Viewing Angles Resolution (RGB Dots) Contrast Ratio Color temperature Color Gamut Gamma Luma Linearity Dot Pitch Pixel Response Screen Refresh Rate Backlight Type / Life Brightness System Inputs Active Outputs Available when power is applied to monitor 7” (6.14”H × 3.27”V) (156.0mm x 83.28mm) 130°H x 120°V 800H x RGB x 480V (1.2 million pixels) 400:1 D65 (6500° Kelvin) SMPTE-C of CEI-1931 2.2 Typical +/- 3% with 5 ire increments (0 to 10 ire) 0.065mm H x 0.173mm V 30ms average 50/60 Frames per second CCFL / 10,000 to 20,000 Hours Typical 400 cd/m² NTSC/PAL auto recognition SDI (Serial Digital Interface-CCIR-601) (SMPTE-259M) ( BNC) Analog Composite (BNC) S-Video (Y/C) (4 pin mini din female) 3 Lamp Tally (DB-15 Female) Power (4 pin male XLR) SDI (BNC) (Re-clocked and Re-shaped) Composite Video (BNC) S-Video (Y/C) (4 pin mini din female) 6 Mechanical Specification Dimensions Approx. Weight Power Consumption Operating Temperature Storage Temperature 4 7.44”W x 5.0”H x 2.5”D (18.89cm x 12.7cm x 6.35cm) 3 lbs 14-10 VDC, 15 Watt nominal (3.0Amps max - UL Class 2 supply included) -20° C to 65° C Ambient -30° C to 85° C V-R70P-SD Users Guide 10 Switch Settings, Functions and Indicators Marshall Electronics 1910 East Maple Ave. El Segundo, CA 90245 Tel.: 800-800-6608 • 310-333-0606 Fax: 310-333-0688 www.LCDRacks.com Email: sales@lcdracks.com Tally Indicators V-R70P-SD Users Guide Power On/Off switch Illuminates red when system power is present Illuminates Green when monitor is ON Image Adjustment Controls Note: Tint only functions when NTSC Video or S-Video are selected HDSDI/SDI Signal indication Lights for active format Screen aspect ratio switch 4:3 or 16:9 selector and indicators 16:9 Aspect 4:3 Aspect Note: Tapping any active input signal toggles BLUE GUN On/Off. Signal selection is active when Blue Gun is on. Tap active selection to turn off. 11 Warranty Marshall Electronics warranties to the first consumer, that this V-R70P-SD portable monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you. This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve products and product features, specifications may change without notice. © Marshall Electronics • 1910 East Maple Avenue • El Segundo, CA • Product and features subject to change Product Overview 1 Features 2 Standard Accessories 3 Optional Accessories 4 Electrical Specifications 5 Mechanical Specification 6 Faceplate Cleaning 7 Operational Setup 8 Input Connectors 9 Switch Settings, Functions and Indicators 10 Warranty 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2005:06:28 11:32:56-07:00 Create Date : 2005:06:28 11:32:11-07:00 Metadata Date : 2005:06:28 11:32:56-07:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : V-R70P-SD Users Guide.indd Creator : Elena Document ID : uuid:ccec310f-9236-4a06-8483-b6b5a6ce1716 Instance ID : uuid:df72d7d6-932d-443a-8d58-3749ebb4619c Producer : Acrobat Distiller 7.0 (Windows) Has XFA : No Page Count : 6 Author : ElenaEXIF Metadata provided by EXIF.tools