Marsk T M6 Bluetooth speaker User Manual M6

Marsk T Co., limited Bluetooth speaker M6

User manual

Bluetooth Speaker1.Specifications1) Micro USB Charging Port2) On/Off Switch3) AUX Port2.Instructions1) Slide the power switch to "On" to turn on the speaker.2) Go to your device settings and activate the Bluetooth® feature, then search for devices. Find this speaker, which appears as "BT-CUP" on the device list, and pair. The voice prompt will alert you if the pairing is successful. (If pass-code is requested, enter "0000.")3) Press the Play/Pause button on your device to play sound. 4) For Volume, adjust using your device's volume control.5) You can use the included 3.5mm to 3.5mm audio cable to connect directly to your device from the speaker without using Bluetooth®. Plug the audio cable into your device, and plug the other end of the cable into the speaker's AUX port.M6 Bluetooth Speaker
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by Marsk T Co., limited may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu