Marsk T M7 Bluetooth earphone User Manual M2 IM singel
Marsk T Co., limited Bluetooth earphone M2 IM singel
Marsk T >
15_M7 UserMan
![](/img.php?id=4083377&img=bg1.png)
Package contains:
a.
Two earphones
b.
Two USB charging cables
c.1 pair middle size ear gel 1 pair large size ear gel
d.User manual
1. Specifications
1) Micro USB Charging Port
2)Multifunctional power button
3) Volume+/Next song
4) Volume-/Previous song
5) LED Indicator
2.Instructions
1)
TWS setting in first use. Press both earphones’ power button to
turn on the earphones until the blue and red lights flashing
alternately. then double click either of the earphone to set the TWS
function. The beep voice will come out after seconds to show two
earphones connected with each other. And one of the earphone will
turn to solid blue light.
2)
Go to your device settings and activate the Bluetooth®feature,
then search for devices. Find the earphones, which appears as
"M7" on the device list, and pair. The voice prompt will alert you if
the pairing is successful.
3)
After first use, the earphones will connect with each other
automatically after power on
Button Function
1)Power on/off: Press the “ Power” button for few seconds
2)Answer/End a call: Short press the “ Power” button
3)Previous song: Short press either of the “-“ button
4)
Next song: Short press either of the ”+”button
5)
Volume: Long press either of the “ +” button to turn the volume up
6)Volume: Long press either of the”-“ button to turn the volume
down
Bluetooth earphone
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can b
e used in portable exposure condition without restriction
FCC ID: 2APOP-M7