Martec Access TTI-TX Garage Door Transmitter User Manual

Martec Access Products Inc Garage Door Transmitter

User Manual

60 K ingsb rid ge Road – P i s c at a w a y , NJ 08854 Phone: 908.233.0044 fax 908.233.2227 or 908.233.4111 www. marsi nt. c om January 19, 2016 Re: FCC Submission – FCC Compliance paragraph from Manual To Whom It May Concern: The device under test is manufactured by the grantee (Martec Access Products) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end- user. Martec Access Products will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information (in blue) must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual. ********************************************************************************* FCC ID: JCQTTI-TX IC ID: 1907A-TTITX This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. ********************************************************************************* Best Regards, Jason Manzi Martec Access Products

Navigation menu