Marvel Industries 6Sbar Users Manual OWNER'S GUIDE Rev A.qxp

6SBAR to the manual 54b0dca1-90ef-44c4-9da9-f3bef90cd0ff

: Marvel-Industries Marvel-Industries-6Sbar-Users-Manual-358021 marvel-industries-6sbar-users-manual-358021 marvel-industries pdf

Open the PDF directly: View PDF .
Page Count: 8

Marvel 6SBAR Beverage Center

Installation

Operation &

Maintenance

Instructions

Part of AGA Foodservice Group

Inspection

Remove Packaging

Your beverage center has been packed for shipment

with all parts that could be damaged by movement

securely fastened. Before using, be sure all packing

materials and tape have been removed.

Important

Keep your carton packaging until your beverage center

has been thoroughly inspected and found to be in good

condition. If there is damage, the packaging will be

needed as proof of damage in transit.

Note to Customer

This merchandise was carefully packed and thoroughly

inspected before leaving our plant. Responsibility for its

safe delivery was assumed by the carrier upon accept-

ance of the shipment. As directed on the side of your

packing carton, claims for loss or damage sustained in

transit must be made on the carrier as follows:

Exterior Damage

Make thorough damage notation on your delivery receipt

and have driver acknowledge by signature and date.

Send a written request asking for an inspection report

from carrier. Include the name of carrier representative

and the date the inspection was requested. Retain

inspection report and receipt for filing of a claim.

Concealed Damage

This must be reported to the carrier within fifteen days.

Obtain inspection report from the carrier. Retain the

inspection report for filing the claim. DO NOT RETURN

DAMAGED MERCHANDISE TO MANUFACTURER -

FILE THE CLAIM WITH THE CARRIER.

How to Install Your

Refrigerated Beverage Center

Select Location: The proper location will ensure peak

performance of your appliance. Choose a location

where the unit will be out of direct sunlight and away

from heat sources. Best performance will be main-

tained when installed within the following parameters:

Cabinet Clearance: Ventilation is required from the

bottom front section of the unit. Keep this area open

and clear of any obstructions.

Electrical Connection: Use nominal 115 volt, 60

cycle AC only. DO NOT USE AN EXTENSION CORD

1

Ideal Ambient Temperature Range

Built-in 65° – 80°F

Free-Standing 65° – 90°F

Power Supply Cord

with 3-Prong

Grounding Plug*

Grounding Type

Wall Receptacle

Figure 1

Grounding Method: This product is factory

equipped with a power supply cord that has a three-

pronged grounded plug. It must be plugged into a

mating grounding type receptacle in accordance with

the National Electrical Code and applicable local

codes and ordinances (see figure 1). If the circuit

does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to

exchange the existing receptacle in accordance with

the National Electrical Code and applicable local

codes and ordinances. The third ground prong

should not, under any circumstances, be cut or

removed. All U.L. listed refrigerated products are

equipped with this type of plug.

How to Operate Your

Refrigerated Beverage Center

Set the Control: The total available temperature

range of the unit is from 39°F to the high sixties,

depending on the thermostat setting and location of

the cabinet. The middle range on the control is from

the mid-forties to the mid-fifties depending on ambient

temperature and location of

the cabinet. The tempera-

ture can be lowered or

raised by turning the control

clockwise or counterclock-

wise, respectively. As with

any refrigeration product,

there is a slight temperature variance at different loca-

tions within the cabinet. For example, the coolest area

will be in the rear of the middle of the cabinet.

Commodities on the top shelf will be 3° to 8° warmer.

This section and the bottom cabinet step section are

the warmest areas. Items in the front of the middle

shelves will be 1° to 4° warmer than the rear of the

shelves. Position your wine inventory accordingly on

your wine shelf.

The glass shelves and fixed position wire rack are for

general beverage storage, such as beer and soft

drinks. Opened wine bottles and tall beverage con-

tainers may be stored on the glass shelf closest to the

cabinet top. Just lift the hinged section of the fixed

position upper wire rack to provide clearance for the

bottles and/or containers to stand upright.

To start your appliance, use a screwdriver to turn the

control clockwise to the middle thermostat setting

(see figure 2). Once the beverage center is loaded,

allow at least 48 hours for the unit to stabilize before

making any adjustments to the initial setting.

Insert Wine Bottles: The wine rack roll-out shelf

holds eight bottles. See figure 3 for typical wine

bottle orientation.

Note: Wine rack can be located at the middle or

bottom part of the cabinet interior. For red wines,

place wine shelf at bottom shelf position in the

cabinet. Then put a glass shelf in the next higher

position. For white and sparkling wines, put the

wine shelf on the middle shelf position in the cab-

inet. Place the remaining shelves as desired.

Also, there is a fixed, wooden, bottle cradle in the

bottom, step section of the cabinet. Six bottles of

wine may be stored there.

Loading Tips and

Suggestions for Wine Rack

The wooden, bottom bottle cradle may be removed for

storing "jug" wines. Just remove the two screws that

secure the cradle to the cabinet floor.

You can store magnum bottles and other large bottles

on any of the shelves (except for the top shelf) by

removing the shelf directly above them or placing the

shelf at a position allowing for proper clearance.

Commodities on the top rack directly under the light will

be exposed to a slightly higher temperature when the

light is on. REMEMBER TO TURN OFF THE LIGHT

WHEN IT IS NO LONGER NEEDED.

Keep wines that you plan to use for everyday drinking

and entertaining on the front half of the racks where

labels are completely visible. Place wines for aging or

longer term storing in rear.

2

Figure 2

Control Knob

(At bottom right

section of grille)

Front Bottles (Necks Facing Rear)

Rear Bottles (Necks Facing Front)

Figure 3

Do not pull out upper glass shelf when tall bottles are placed

upright through the opening in the hinged wire shelf. Doing

so may cause the tall, upright bottles to fall backwards.

How to Clean and

Maintain Your beverage center

Condenser: The condenser tubing inside the cabinet

does not require frequent cleaning; however, satis-

factory cooling depends on adequate ventilation over

the coils. Be sure that nothing obstructs the required

air flow openings in front of the cabinet. At least once

or twice a year brush or vacuum lint and dirt from the

condenser for efficient performance by unscrewing

the grille on the bottom front of the cabinet.

Cabinet: The painted cabinet can be washed with

mild soap and water and thoroughly rinsed with clear

water. Never use abrasive scouring powders.

Interior: Wash interior compartment with mild soap

and water. Do not use an abrasive powder, solvent,

polish cleaner or undiluted detergent.

Glass Door: Use a glass cleaner or mild soap and

water and soft cloth to clean the glass door model.

Do not use any abrasive powders.

Door Gasket: The vinyl gasket may be cleaned with

mild soap and water, a baking soda solution or a mild

scouring powder.

Light Tube Replacement: WARNING! DISCONNECT

THE POWER CORD BEFORE ATTEMPTING LIGHT

TUBE HOUSING ASSEMBLY REPLACEMENT.

Failure to do so may result in an electrical shock that

could severely injure you.

This product uses one, 6 watt light tube to illuminate

the interior of the beverage center. The light tube is a

very reliable electrical component, but should it not

function properly, please call the dealer you pur-

chased your beverage center from for a replacement

light tube housing assembly. Use only an original

equipment light tube housing assembly from your

dealer or manufacturer.

Using a 5/16” hex-head driver, remove the two hex-

head screws holding the old light tube housing

assembly in place. Disconnect the electrical plug

from the cabinet’s electrical receptacle and discard

the old light tube housing assembly. Reconnect the

electrical plug of the new light tube housing assem-

bly to the cabinet’s electrical receptacle. Make sure

it is secure and fully inserted.

Using the 5/16” hex-head driver, resecure the two

hex-head screws back into their original positions to

fasten the light tube housing assembly to the top of

the cabinet.

Re-use the original two screws to secure the light tube

housing in place. Plug the beverage center into the

electrical socket. Check to see if the light tubes oper-

ate properly. Your light tube’s replacement is complete.

The light tubes are not covered by your guarantee. A

replacement light tube housing can be obtained from

your service provider or from Marvel Industries.

What to do in

the Event of a Power Failure

Most power failures are corrected within two hours

and will not affect the unit’s temperature providing you

minimize the number of door openings while the

power is off. A gradual rise in temperature should not

have any adverse effect on your wine if power is out

for a longer period. If it is extremely hot, you may

want to move your wines to the coolest location you

can find until power is restored.

Appliance Features

Adjustable Temperature Control: Please see “how

to Operate Your Refrigerated Beverage Center” on

page two.

Interior Light and Switch: The interior light makes it

easy to view the contents of your beverage center.

When the switch is in the

“OFF” position, the light

will come on when the

door is opened. When

the switch is pushed such

that the “red” portion of

the rocker is showing, the

switch is in the “on” position and the interior light will

stay on continuously. Remember to turn the off the light

when it is no longer needed.

3

4

Roll-out Shelves: The roll-out shelves may be pulled

out approximately 14 inches to facilitate product loading

and retrieval. Do not lean on or press down heavily on

the shelves, doing so may damage the shelves or their

content. Pull out shelves gently to minimize any possible

item shifting. To maintain stability, avoid pulling out more

than one shelf at any time.

The roll-out shelves are equipped with a removable

center section that allows you to customize the stor-

age capability of your beverage center. Your unit is

shipped with two glass shelves,one wine rack, one

wooden bottle cradle, and one fixed wire shelf. For

added versatility, additional center sections are avail-

able. Please contact dealer or see Marvel’s website at

www.marvelindustries.com for ordering.

Single Bottle Racks: Because bottles are not stacked

on top of each other, you can easily view and access

your inventory without disturbing other bottles.

Before Calling for Service

Before calling for service, check the trouble shooting

table on this page. This table lists possible problems

that you can remedy without difficulty to avoid an unnec-

essary service call.

If you do need service, contact your dealer or the manu-

facturer. In any correspondence, refer to the model

number and serial number of your unit which is located

on the lower front cabinet flange. Retain you proof of

purchase. You may want to record these numbers in the

space provided on this page. Follow the procedure out-

lined on page 5.

Problem

Odor in cabinet

Noisy operation

Cabinet vibrates

Cabinet light not working

Appliance will not run

Appliance runs too long

Moisture collects inside

Moisture collects on outside

surface

Interior too hot/too cold

Possible

Causes/Solutions

•Interior needs cleaning

•Cabinet not level

•Weak floor

•Cabinet not level

•Weak floor

•Tube burned out

•No power at outlet

•Temperature control turned

to “OFF”

•Line cord not plugged in

•No power at electrical outlet

•House fuse blown

•Prolonged door openings

•Control set too cold

•Condenser needs cleaning

•Too many door openings

•Prolonged door openings

•Hot, humid weather

increases condensation

•Hot, humid weather

increases condensation. As

humidity decreases,

moisture will disappear.

•Control improperly set.

•Control improperly set

•Faulty thermometer

•Relocate thermometer to

center of cabinet and

recheck

If You Do Need Service

In the event that you do need service, be sure to report the

model number, serial number and proof of purchase to your

service representative. Model number and serial number

are found on the serial plate which is located on the lower

front cabinet flange. For your convenience you may want to

record the following information for your records.

Date of purchase

Dealer’s Name

Dealer’s Address

Dealer’s City

Dealer’s State Zip

Appliance Serial Number

Model Number

Date Warranty Card Sent (Must be within 10 Days of Purchase)

How to Obtain Service

Your refrigerated beverage center requires little service

because the best and most up to date materials, equip-

ment and quality methods are employed throughout the

manufacturing process.

If trouble occurs during normal operation, first check the

troubleshooting chart on page 4 to see if any of these

simple steps may correct the problem. If service

becomes necessary:

Contact the dealer where your appliance was purchased

or the manufacturer for the name of your nearest

authorized service representative. The service represen-

tatives will have full authority tom make any repair

deemed necessary.

If you are in an area where there is no service repre-

sentative, write or call the manufacturer directly. We

will make recommendations as to the proper proce-

dure for correction. Service work and replacement -

parts, if required, will be provided as covered by your

limited warranty.

IT IS IMPORTANT THAT YOU SEND IN YOUR WAR-

RANTY RECORD CARD IMMEDIATELY AFTER TAKING

DELIVERY OF YOUR REFRIGERATION APPLIANCE.

Every new refrigeration appliance that leaves the factory

contains this Owner's Guide in a safe place for conven-

ient reference.

Normal Responsibilities

of the Owner Include

All freight charges.

Damage sustained in transit (see page 1)

Mileage charge(s) for service calls.

Proper installation.

Alterations to original equipment.

Removal or installation of additional equipment.

5

Under Counter Beverage Center Specifications

Dimensions W x H x D (in.) 237/8 x 34 x 241/4

Weight 145 lbs.

Temperature 39-69°F

Power Supply 115V

supplied with a 15 amp plug

Marvel Household Refrigeration

Products Limited Warranty

Entire Product - Limited One Year Parts and Labor

Warranty. MARVEL warrants that it will supply all neces-

sary parts and labor to repair or replace in the end

user's home or office, any component which proves to

be defective in materials or workmanship, subject to the

condition and exclusions stated below, for period of one

year from date of purchase by the end user.

Additional Second Through Fifth Year Limited Parts Only

Warranty. During the four years following expiration of

the One Year Limited Warranty, MARVEL will supply

replacement parts for the hermetically sealed refrigera-

tion system which consists of the compressor, condens-

er, drier, connecting tubing and the evaporator that are

proven to be defective due to workmanship or materials

subject to the conditions and exclusions below.

The above warranties do not cover:

- Shipping costs of replacement parts or returned

defective parts.

- Customer education or instructions on how to use

the refrigerator/freezer.

- Any content loss due to product failure. - Removal

or installation.

Nor do the above warranties cover failure of this product

or its components due to:

- Transportation or subsequent damages.

- Use commercially or use other than normal house-

hold or office.

- Improper installation, misuse, abuse, accident or

alteration, use on wiring not confirming to electrical

codes, low voltage, failure to provide necessary

maintenance, or other unreasonable use.

- Parts or service not supplied or designated by MARVEL.

The above warranties also do not apply if:

- The original Bill of Sale, deliver date or serial num-

ber cannot be verified.

- Defective parts are not returned for inspection if so

requested by MARVEL.

- The refrigeration equipment is not in the posses-

sion of the original end use purchaser.

THE WARRANTIES SET FORTH HEREIN ARE THE

ONLY WARRANTIES EXTENDED BY MARVEL INDUS-

TRIES. ANY IMPLIED WARRANTIES, INCLUDING THE

IMPLIED WARRANTY OF MERCHANTABILITY, ARE

LIMITED TO THE DURATION OF THESE EXPRESS

WARRANTIES. IN NO EVENT SHALL MARVEL INDUS-

TRIES BE LIABLE FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES OR EXPENSES RESULTING

FROM BREACH OF THESE OR ANY OTHER WAR-

RANTIES, WHETHER EXPRESSED OR IMPLIED.

Some states do not allow the exclusion or limitation of

consequential damages or limitations on how long an

implied warranty lasts, so the above exclusion or limita-

tion may not apply to you. This warranty gives you spe-

cific legal rights, and you may also have other rights

which may vary from state to state.

No person, firm or corporation is authorized to make

any other warranty or assume any other obligation for

MARVEL INDUSTRIES. These warranties apply only to

products used in any of the fifty states of the United

States and the District of Columbia.

To obtain performance of this warranty, report any

defects to:

MARVEL INDUSTRIES

P.O. Box 997

Richmond, Indiana 47375-0997

Phone: 765-962-2521

IN NO EVENT SHALL THE COMPANY BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

INCLUDING, BUT NOT LIMITED TO, CONTENT LOSS.

Some states do not allow limitations on length of time

implied warranty may last, so the above limitations may

not apply to you.

This warranty gives you specific legal rights. You may

also have other rights which very from state to state.

Help prevent tragedies

Each year children die because they climb inside a

discarded refrigeration product, get trapped inside

and suffocate. Take precautions to prevent such

tragedies by removing the door, taping or chaining it

shut before discarding.

6

41008927 Rev A

WWW.MARVELINDUSTRIES.COM

Phone: (765) 962-2521 Fax: (765) 962-2493

Marvel Industries

Part of AGA Foodservice Group

233 Industrial Parkway

P.O. Box 997

Richmond, IN 47375-0997