Mason America I3399A Tablet Computer User Manual
Mason America, Inc. Tablet Computer Users Manual
Users Manual
model: I3399A Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. SPECIFIC ABSORPTION RATE (SAR) CERTIFICATION INFORMATION This device meets international guidelines for exposure to radio waves. Your mobile device is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and includes a substantial safety margin designed to assure the safety of all persons regardless of age and health. The radio wave exposure guidelines uses a unit of measurement known as the Specific Absorption Rate, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SPECIFIC ABSORPTION RATE (SAR) INFORMATION: This tablet meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. USER INFO or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: This marking on the battery, manual, or packaging indicates the batteries in this product should not be disposed of with other household waste. SAFETY INFORMATION Read all safety information before using the device to ensure safe and proper use. Failure to follow safety and warning guidelines can result in injury and death. Do not expose the device to physical impact or damage. Only use manufacturer-approved batteries, chargers, and accessories. Prevent the multipurpose jack and battery terminals from contacting conductive elements such as metal or liquids. If any part of the device is cracked or broken, or if the device becomes very hot, stop using the device immediately. Do not turn on or use the device when the battery compartment is exposed. Do not bite or suck on the device and any accessories attached to the device. FCC CAUTION 15.19 Labeling requirements This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. 15.21 Information to user Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio BODY-WORN OPERATION This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm for body worn and 20cm for hotspot must be maintained between the user’s body and the handset, including the antenna. Third-party beltclips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Do not insert the device or any attached accessories into the ears, mouth, or eyes. CORRECT DISPOSAL Do not dispose your mobile and/or battery in fire or any flammable sources. Do not dispose your mobile and/or battery with regular household waste. For proper disposal please contact customer service. Do not use the camera flash close to the eyes of any animals or humans. Do not store your device in very hot or very cold ambient temperature areas. Recommended operating temperature range is between0 0 oC to 4 oC. 45 Do not store your device near high heat sources including heaters, microwaves, cooking equipment, or high pressure containers. Keep your device dry. Do not touch the device with wet hands. Avoid the use of the device in humid environments such as restrooms, and during water-based activities. Do not use your device outdoors during a thunderstorm. Keep the device at a minimum distance of 15cm away from any active electronic medical implanted device. 1.866.217.5164 bymason.com This marking on the product, manual, accessories or packaging indicates the product and its electronic accessories (e.g. charger, headset, and USB cable) should not be disposed of with other household waste. This product is RoHS compliant. Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle. A Slide left/right to open/close the camera cover ports magnified for viewing, located under technicians hood A: Camera Cover G: USB Port N: Power Jack B: VOIP Handset H: Universal Mounting Holes O: USB C: Button Bar (left to right: back, I: RFID Reader P: Ethernet home, recents, volume down, volume up, power) J: Opening for Cords Q: USB D: Speakers K: SD Card Slot R: Technician Service Access E: Audio Jack L: Mini USB F: Microphone M: USB Operating temperature:0-45°C Operating frequency range: 2.4G Frequency Range: 2400MHz~2483.5MHz NFC Frequency Range:13.56MHz Outputpower: Wifi:17.9dBm Declaration of Conformity Hereby, Mason America, Inc declares that the radio equipment type I3399A of Tablet Computer is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bymason.com This device may be used in each EU member state. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. DECLARATION OF CONFORMITY Responsible party details Company name: Mason America, Inc Address: 506 2nd Ave Suite 1400, Seattle WA, 98104 Contact Person: Alexander Klein Email: alex@bymason.com Phone No.: 206-486-4727 Fax No.: Product details Product: Tablet Computer Brand name: Mason Model name: I3399A Manufacturer: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Bld.2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China 518000 We hereby declare that the equipment bearing the trade name and model number specified above was tested confirming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements. Applied Standards Report No.: United States CFR 47 Part 15 Subpart B - Electromagnetic Emissions (Unintentional Radiators) BL-HK1860102-401 The product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Signature: Print name: Alexander Klein Date of issue: 6/27/2018
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2018:07:06 17:17:30+08:00 Creator : Adobe Acrobat Pro 10.0.0 Modify Date : 2018:07:06 17:17:30+08:00 Title : Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2018:07:06 17:17:30+08:00 Creator Tool : Adobe Acrobat Pro 10.0.0 Format : application/pdf Document ID : uuid:ff823f4c-f12f-4b73-be70-b96779352d55 Instance ID : uuid:a35c809b-a297-4290-a485-0579de7a498f Producer : Adobe Acrobat Pro 10.0.0 Page Count : 5EXIF Metadata provided by EXIF.tools