Matrix Design Group MDG-T1000 RFID Personnel Safety Tag User Manual Operator Manual
Matrix Design Group, LLC RFID Personnel Safety Tag Operator Manual
Operator Manual
1
Title: T1000 TAG Rev02 Operators Manual
Number: P00046
Rev: 1.0
Date: 11/10/2006
Sheet: 1 of 2
DO NOT CHANGE WITHOUT APPROVAL OF MSHA
MATRIX DESIGN GROUP, LLC
5741 Prospect Drive,
Newburgh, IN 47630
v-812-490-1527
f-812-490-1582
Table of Contents:
Pg.1 Summary
Pg. 2 Installation, Use, Maintenance, Return or Replacement
Summary:
This manual describes the installation, use, and maintenance of the T1000
TAG Rev02.
2
DO NOT CHANGE WITHOUT APPROVAL OF MSHA
Installation:
Permanently attach the T1000 TAG to your helmet using adhesive, or other
MSHA-approved permanent mounting hardware.
Use:
The T1000 TAG will periodically send a digital radio message containing a
unique ID code that can be received by networked receivers installed in a
mine. The tag is intended to be worn at all times while in the mine.
Maintenance:
The T1000 TAG is not user replaceable or serviceable. If the tag is damaged
or inoperative, please return the unit to the distributor for replacement.
Return or Replacement:
If a T1000 TAG is damaged or inoperative, please return the unit to the
distributor for replacement.