Matrix Product Development TP1000 BASE STATION TRANSCEIVER User Manual Matrix Product Development
Matrix Product Development, Inc. BASE STATION TRANSCEIVER Matrix Product Development
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 907982 |
| Application ID | +LUIYWwybFbUIkutyUnEsQ== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 4.26kB (53224 bits) |
| Date Submitted | 2008-02-29 00:00:00 |
| Date Available | 2008-02-29 00:00:00 |
| Creation Date | 2008-02-22 14:53:44 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2008-02-22 14:54:00 |
| Document Title | Matrix Product Development |
| Document Creator | Acrobat PDFMaker 7.0.7 for Word |
Matrix Product Development 10-2-07 djp User Manual TP1000 Introduction: The TP1000 is an industrial transceiver. It is designed to operate in conjunction with a TP550 Temperature Probe. Technical Specifications: Power: 9-24 VDC input, 12VDC Nominal Temp Range: -20C to +85C Frequency: 433MHz Case Material: ABS Antenna: ANT-433-CW-HD from Linx Technologies. Basic Operation: If the TP1000 is not operated with a control interface connected then the only necessary connections to the unit is the power cable and the external antenna. Those connections are described below. The TP1000 (Base) operates in Receive mode unless it gets a request for acknowledge from a TP550 (Probe). The Base, once it receives a legitimate packet, will send an acknowledge back to the Probe, process the information and store it. The Base will only send Probe data to an outside user when asked for it (ex: If an industrial control requests data via the RS485 port). The packet the Base receives is roughly 16.66ms long. The acknowledge packet sent out, after receiving a legitimate message, is also roughly 16.6ms in length. The whip antenna will attach via a bulkhead RPSMA connector located on the side of the TP1000 case. The standard cable length is approximately 36â. The whip antenna is designed to be mounted on a ground plane at least four inches square. Reliable communications cannot be guaranteed when a smaller ground plane is used. A larger ground plane, if possible, is preferred. The Base is powered via the 5 pin, green connector located on the side of the case. The pinout is as follows: Pin 1: Pin 2: Pin 3: Pin 4: Pin 5: RS485A RS485B 9-24VDC GND GND Care should be taken not to connect up power to any pin besides Pin 3. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Company : Source Modified : D:20071113132300 Create Date : 2008:02:22 14:53:44-05:00 Creator Tool : Acrobat PDFMaker 7.0.7 for Word Modify Date : 2008:02:22 14:54-05:00 Metadata Date : 2008:02:22 14:54-05:00 Document ID : uuid:272454c5-47f1-4ad4-99ef-c3a7a87c5616 Instance ID : uuid:feda314d-6059-4a8d-87ae-de4e5e9e0a59 Version ID : 17 Format : application/pdf Title : Matrix Product Development Creator : Subject : Headline : Page Count : 2 Page Layout : OneColumn Language : EN-US Author :EXIF Metadata provided by EXIF.tools