Matsunichi Communication R and D DM189 MOBILE HARD DRIVE User Manual DM189 User Guide
Matsunichi Communication Holdings R&D; (Shenzhen) Co., Ltd. MOBILE HARD DRIVE DM189 User Guide
Users Manual
![](/img.php?id=1319426&img=bg1.png)
2010.07.06
100g书写纸
正反面单黑印刷,中间对折
V1.0
物料名称:DM189 User Guide
成品尺寸:80x105mm
Introduction
Thank you for using Matsunichi mobile hard drives.
Notes
1. In the course of the preparation of this user manual, we are trying
to put the contents as accurate and correct as possible. But it could
include technical inaccuracies or typographical errors.
2. Matsunichi warrants that this hard drive is manufactured from new
parts; is free from defects in material and workmanship; conforms to
Matsunichi’ s specifications. And Matsunichi provides repair and
replacement free of charge for 12 months from the date of its sales.
Matsunichi does not warrant and repair of failures caused by: misuse;
unsuitable physical or operating environment; maintenance by anyone
other than Matsunichi technicians or authorized personnel. And any
losses of data and any direct and indirect losses caused by the above
mentioned conditions are not warrant by Matsunichi and Matsunichi
is not responsible for such losses.
3. Matsunichi reserves the right to make changes or modifications to
software, hardware and user manual. Matsunichi has the final right to
interpret.
Product Features
1. Shock absorber design to ensure the physical security of hard
drive.
2. High-speed USB2.0 interface, transfer rate up to 480Mbps.
3. No driver installation needed for Windows 2000 OS or newer, plug
and play.
4. Low power consumption, no external power needed.
5. Large-capacity cache 2Mb, 4200 rps high-speed to ensure
high-speed data transmission.
6. Full service: 1 year warranty.
System Requirements
1. Hardware system
USB2.0 interface with Desktop computers or Notebook.
2. Software system
Windows 2000/ XP/ Vista/ 7 and Mac OS 9.2 or newer;
No driver installation required for compatible hardware, turn on the
computer, connecting hard drive, the computer will be prompted to
find and automatically install new hardware drivers.
Connecting Introduction
Please plug one end of USB line to Mini-USB2.0 port of hard drive,
connect the other end to computer.
Matsunichi Mobile Hard Drive User Manual
DM189
简介
感谢您使用松日1.8寸移动存储设备。
注意事项
1.在编写本说明书过程中力求内容正缺与完整,但并不保证本说明书
没有任何错误和漏失。
2.松日只对机器本身存在问题负有保修和维修责任,对于因软件误操
作、产品维修或者其他意外情况等所引起个人数据资料删改或丢失,
不负任何责任,也不对因此造成其他间接损失负责。
3.本产品软件及硬件或者说明书有任何修改,如不另行通知,松日拥
有最终解释权。
产品特色
1.减震设计,保证存储设备的物理安全
2.高速USB2.0接口,传输速率高达480Mbps
3.Windows 2000以上系统无需驱动,即插即用
4.低功耗设计,无需外接电源
5.大容量2M缓存,4200转高速硬盘,保证数据高速传输
6.全程服务:一年质保
系统要求
1.硬件系统
带USB接口的台式电脑、笔记本电脑等。
2.软件系统
Windows 2000/ XP/ Vista/ 7 and Mac OS 9.2及以上操作系统;
无需驱动程序,启动计算机后,连接好移动硬盘,计算机会提示找
到新硬件并自动安装驱动程序。
连接说明
请将USB线一端插入硬盘Mini-USB2.0接口,USB一端插入电脑,即可
使用。
松日移动硬盘说明书
DM189
R
R
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’ S AUTHORITY TO OPERATE
THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules.Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and,if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
1 2
4 3