Mattel Asia Pacific Sourcing B5117-04A4R Roll Cage User Manual B5115 0920 1L US

Mattel asia Pacific Sourcing Ltd. Roll Cage B5115 0920 1L US

users manual

TYCO R/C SUPPORTQuestions or problems with your product? DON’T RETURN IT TO THE STORE!Just call us for help. U.S. consumers may also register their products at this number.1 888 557-TYCO (8926)®tycorc.comB5115-0920VehicleThis manual contains important information about the use and maintenance of your vehicle. The included DRIVER’SGUIDE tells you how to drive your vehicle…and how to do the wildest stunts ever!Keep these instructions for future reference: they contain important information.IMPORTANT: Please read all “Consumer Information” (last page) before operating your vehicle.CONTENTS/FEATURESUSER’S MANUALqtrywq= Front = RearqWhen your vehicle starts to lose power, it may lose functions or performance. It's time for a recharge. For beststunt performance, always start with a fully-charged battery. Your vehicle's running time may change dependingon your driving style.wRadio interference can make your vehicle run badly. Interference can be caused by other R/C vehicles running onthe same frequency; electrical wires; large buildings; CB radios; or other wireless gear. Try to stay away fromthese!ePoint your transmitter antenna up - not down toward your vehicle. If your vehicle gets too far away, it won't workproperly. rDon’t drive your vehicle in sand or through water or snow. If your vehicle does get wet, wipe with a towel andallow to dry completely.tDon’t store your vehicle near heat or in direct sunlight. Always turn switches OFF and remove all batteries forstorage. We recommend that you store your vehicle with the super stunt arm retracted.BATTERY SAFETY INFORMATIONIn exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your toy(product). To avoid battery leakage:• Non-rechargeable batteries are not to be recharged.• Rechargeable batteries are to be removed from the toy before being charged (if designed to be removable).• Rechargeable batteries are only to be charged under adult supervision (if designed to be removable).• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.• Do not mix old and new batteries.• Only batteries of the same or equivalent type as recommended are to be used.• Batteries are to be inserted with the correct polarity.• Exhausted batteries are to be removed from the toy.• The supply terminals are not to be short-circuited.• Dispose of battery(ies) safely.• Do not dispose of this toy in a fire. The batteries inside may explode or leak.Battery Performance Note:For best performance use regular or high-performance alkaline batteries (where disposable batteries are called for).If your vehicle is supplied with standard (carbon-zinc) batteries for initial use and/or demonstration purposes, werecommend replacing them with alkaline batteries when necessary. Battery life may vary depending on batterybrand.SAFETY TIPS• NEVER drive your vehicle on streets! They’re for real cars!• DO NOT pick up vehicle while in motion.• Keep fingers, hair and loose clothing away from the tires and the wheel hubs while the vehicle is switched ON.XCAUTION: To prevent entanglement, keep hair away from wheels.• Adult supervision is recommended when this vehicle is being operated.• To avoid accidental operation, remove all batteries when not in use. Always turn the vehicle OFF before removingbatteries.ìCONSUMER INFORMATIONNote to Adults: To ensure that the child’s play is both safe and fun, please review all operating instructions andsafety rules with your child.QUICK TIPS©2004 Mattel, Inc., Mt. Laurel, NJ08054 U.S.A. PRINTED IN CHINA. AllRights Reserved. MATTEL, TYCO andassociated trademarks and tradedress are owned by Mattel, Inc.Retain this address for futurereference: Mattel U.K. Ltd., VanwallBusiness Park, Maidenhead SL6 4UB.Helpline 01628 500303. MattelAustralia Pty Ltd., Richmond, Victoria3121 - Consumer Advisory Service:1300 135 312. Mattel East Asia Ltd,Room 1106, South Tower, WorldFinance Centre, Harbour City,Tsimshatsui, HK, China. Diimport &Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, Menara Lien Hoe,Persiaran Tropicana Golf CountryResort, 47410 PJ. Tel: 03-78803817,Fax: 03-78803867.COMPLIANCE WITH FCCREGULATIONS (VALID IN U.S. ONLY))This device complies with part 15 ofthe FCC Rules. Operation is subject tothe following two conditions: (1) Thisdevice may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that maycause undesired operation.This device generates and uses radiofrequency energy and if not usedproperly may cause interference toradio and television reception. It hasbeen tested and found to comply withthe limits set by the FCC which aredesigned to provide reasonableprotection against such interference.NOTE: Changes or modifications notexpressively approved by themanufacturer responsible forcompliance could void the user’sauthority to operate the equipment.90-DAY LIMITED WARRANTY – TYCO® R/C PRODUCTSMattel, Inc. warrants to the original consumer purchaser that this product willbe free of defects in material and workmanship for ninety (90) days (unlessspecified in alternate warranties) from the date of purchase. Mattel willreplace the product in the event of such a defect within the warranty period.In the event of a defect covered under this warranty, first call the toll-freenumber listed below. Many problems can be solved in this manner. Ifnecessary, you will be instructed to return the product, postage prepaid andinsured, to the address below. Enclose your name, address, dated salesreceipt, and a brief explanation of the defect. Replacement and returnshipment will be free of charge.This warranty does not cover damage resulting from unauthorizedmodification, accident, misuse or abuse. If the product is returned without adated sales receipt the product may be excluded from coverage under thiswarranty.Mattel’s liability for defects in material and workmanship under this warrantyshall be limited to replacement, and in no event shall we be responsible forincidental, consequential, or contingent damages (except in those states thatdo not allow this exclusion or limitation). This warranty is exclusive, and ismade in lieu of any express or implied warranty. Valid only in U.S.A. Thiswarranty gives you specific legal rights and you may have other rights, whichvary from state to state. Some states do not allow the exclusion of incidentalor consequential damages, so the above exclusions or limitations may notapply to you.TOLL-FREE NUMBER: 1-888-557-TYCO (8926) (valid only in U.S.A.)Hours: 8:00A.M. - 5:00 P.M. Eastern Time; Monday - Friday. Expect some delay in Januaryfollowing the holiday season. Please be patient and keep trying the toll-freenumber.ADDRESS FOR RETURNS: CONSUMER RELATIONS, 636 GIRARDAVENUE, EAST AURORA, NY 14052eNOTE: When you take your vehicle out of the box, you will need to perform a few simple steps to get it ready for action:1. Attach 1 front wheel and 1 back wheel. This is a simple, one-time process. Each wheel is marked with its own symbolfor easy identification, and the chassis is marked with a corresponding symbol.(Shown with all 4 wheels attached – please see Note below)qBattery doorwLED IndicatoreBattery door latches (x2) rRear wingtON/OFF switchySuper stunt armCAUTION:Surfaces may become hot and cause burns ifelectronics get wet. Do not operate vehicle through water or snow.
TransmitterqDriving controlswStunt buttoneAntennaNOTE: Your transmitter is equipped with a special automatic ONbattery-saving feature. Just turn your vehicle ON. Then activatethe transmitter controls and you will be able to run and controlyour vehicle.BATTERY INSTALLATIONVehicleTransmitterPROTECTION SYSTEMSYour vehicle is equipped with advanced systems toprotect its electronic components.SMART CIRCUITRYSpecial “Smart Circuitry” is designed to cut yourvehicle’s power in the event it stalls or gets stuck. Thisdoes not indicate a problem with the vehicle! Simplyrelease the transmitter controls for a few seconds, thenresume normal operation.LED INDICATORThe LED indicator can give you important informationabout your vehicle’s status. In normal operation, the LEDis OFF.• If the LED indicator comes on and glows steadily(typically under extreme operating conditions), thevehicle will stop running temporarily. This does notindicate a problem with the vehicle! Simply release thetransmitter controls and wait until the LED indicatorgoes off (this could take a couple of minutes). Don’tremove or touch the vehicle battery while the LEDindicator is glowing steadily – the battery may be warmto the touch.• If the LED indicator comes on and flashes, you need torecharge your vehicle’s battery. Simply turn the vehicleswitch OFF, remove the battery and recharge it. (Youmay want to consider purchasing a spare battery fornon-stop driving action.)1. To install the transmitter batteries, open battery door asshown.2. Install two LR6 (AA) batteries with polarity (+/-) as showninside battery compartment.3. Close battery door.BATTERY CHARGING/CAREFor detailed information regarding NiMH vehicle battery charging and safety, please follow the specific instructionsthat came with your battery pack and charger.2 x 1.5V d.c.7.2V d.c.12qqew1. Rotate the 2 latches outward, as shown, to unlock the battery door.2. Make sure the TMH® FlexPak® battery pack is fully flat, so that the labels marked 1 and 2 are facing up, asshown. 3. Swing the battery door up and push to close. Rotate the 2 latches inward, as shown, to lock the battery door.NOTE: The super stunt arm must be in the retracted position in order to access the vehicle’s battery compartment.Swing the battery door down.Insert the battery pack into the battery compartment as shown and slide it all the way into the battery compartment.Press down to snap the battery pack into place.First, match the symbol on the inside of the tire to the corresponding symbol on the chassis, as shown. Then slideeach wheel onto the axle and tighten the screw as shown (screwdriver not included).RearFront2. Snap the shock absorber onto the super stunt arm as shown. Carefully align the shock absorber with the steel bar,and push to snap it into place.NOTE: If the super stunt arm ever gets stuck in the extended position, simply turn the vehicle’s power switch OFF andpull the arm away from the vehicle body until it unsnaps from the shock absorber. Before operating the vehicleagain, reattach the shock absorber as described in Number 2.q

Navigation menu