Mattel Asia Pacific Sourcing FFN33-17A1T Fisher-Price Laugh & Learn First Words Smart Puppy User Manual FFN33 0970 G1 1101367843 DOM indd
Mattel Asia Pacific Sourcing Ltd. Fisher-Price Laugh & Learn First Words Smart Puppy FFN33 0970 G1 1101367843 DOM indd
User Manual
FFN33 Keep this instruction sheet for future reference, as it contains important information. Requires four AA batteries (included). Batteries included are for demonstration purposes only. Adult assembly is required. Tool required: Phillips screwdriver (not included). Wipe this toy with a clean, damp cloth. Do not immerse. This toy has no consumer serviceable parts. Do not take apart. This product emits flashing lights at 5 - 30 cycles per second. Frequency: 13,56 MHz. Rated power: 0,75 Watt. H-field: 15.66dBuA/m at 10m fisher-price.com Assembly CAUTION Battery Replacement 1,5V x 4 AA (LR6) This package contains small parts. For adult assembly only. M4,0 x 12mm Screw - 4 Shown Actual Size • For longer life, use alkaline batteries. • Loosen the screw in the battery compartment door and remove the door. Remove the exhausted batteries and properly dispose. • Insert four, new AA (LR6) alkaline batteries. • Replace the battery compartment door and tighten the screw. • If this toy begins to operate erratically, you may need to reset the electronics. Slide the power/volume switch off and back on. • When sounds/lights becomes faint or stop, it’s time for an adult to change the batteries. • Turn the toy so that the bottom is facing you. • Fit the feet to the base of the toy. • Insert two screws into each foot and tighten with a Phillips screwdriver. Do not overtighten the screws. Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbonzinc) or rechargeable. • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak. • Never short-circuit the battery terminals. • Use only batteries of the same or equivalent type, as recommended. • Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the product before charging. • If removable, rechargeable batteries are used, they are only to be charged under adult supervision. The “Magic” of First Words! Press for fun lights and music! ic! Press a button • Slide Swipe a block over or press a block on the “magical” reader. the power/volume switch on the bottom side of the toy to ON with low volume , ON or OFF . with high volume the Smart StagesTM mode switch to: Explore - Press a button or swipe a block over the “magical” reader for first words identifying colors, shapes, objects and animals. Encourage - Press a button or swipe a block over the “magical” reader to identify shapes and objects. Listen for prompts and get a fun reward when baby presses the correct button! Pretend - Press a button or swipe a block over the “magical” reader for words, songs and phrases that encourage pretend play! Hint: After about one minute of inactivity, the “magical” reader enters sleep mode. Press any button to wake up! • Slide Consumer Information CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland. Industry Canada (IC) Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d’Industry Canada (IC) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Protect the environment by not disposing of this product or any batteries with household waste. This symbol indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities. ©2017 Mattel. All Rights Reserved. PRINTED IN CHINA FCC STATEMENT (UNITED STATES ONLY) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help. NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FFN33-0970-G1 1101367843-DOM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Producer : Acrobat Distiller 15.0 (Macintosh) Creator Tool : Adobe InDesign CC 2014 (Macintosh) Create Date : 2017:04:05 15:27:21+08:00 Modify Date : 2017:04:05 15:28:03+08:00 Metadata Date : 2017:04:05 15:28:03+08:00 Format : application/pdf Creator : qiujeff1 Title : FFN33-0970-G1-1101367843-DOM.indd Document ID : uuid:af036315-d037-f54a-aa92-3248ee861428 Instance ID : uuid:53b7e932-9e7e-a540-9588-25d35065a90a Page Count : 4 Author : qiujeff1EXIF Metadata provided by EXIF.tools