Mattel Asia Pacific Sourcing K4386-06A1T HYPER SCAN User Manual users manual

Mattel asia Pacific Sourcing Ltd. HYPER SCAN users manual

UserManual.wiki >

Mattel Asia Pacific Sourcing >

K4386-06A1T User Manual >

Contents

1. users manual
2. USERS MANUAL

users manual

SCAN BATTLE RESCAN

CONSOLEINSTRUCTIONSK4386-0920© 2006 Mattel, Inc. 333 Continental Blvd., El Segundo, CA 90245 U.S.A. All Rights Reserved.Printed in ChinaTMCONSUMER INFORMATIONNeed Assistance? In the US and Canada, service.mattel.com or 1-800-524-8697, M-F 8AM – 6PM, ET. SCAN BATTLE RESCAN

Keep these instructions for future reference as they contain important information.Contents:1 HyperScan™ game console 1 HyperScan™ controller 1 A/C adapter (120v in/6v out) 3 RCA cables 1 X-Men game disc 6 X-Men game cards 1 Instruction ManualPlease remove all components and compare them to the content list. If any items are missing, please call 1-800-524-8697. Outside the U.S., please consult your telephone directory for a listing of your local Mattel ofﬁce.SCAN BATTLE RESCANTable Of ContentsSetting Up Your SystemController ConﬁgurationUsing Intellicard™ Collectible Game CardsDos And Don’tsTrouble ShootingSCAN BATTLE RESCAN

Setting Up Your System1 Set console on a ﬂat, stable surface.2 Open console and rest both sides on the ﬂat surface.3 With both your Hyper Scan™ console and your TV/VCR/ DVD player(s) in the off position, locate the AV cable attached to your Hyper Scan™ console; there should be one yellow, one red and one white connector. These cables need to be plugged into your TV or VCR/DVD player. Plug the yellow connector into the yellow “Video In” jack on your TV or VCR/ DVD player. Plug the white connector into the white “Audio In” (L) jack on your TV or VCR/DVD player and plug the red connector into the red “Audio In” (R) jack. The video and audio inputs are usually in the front or the back of your TV, VCR or DVD. However, depending on the type of TV or VCR/DVD you have, they could be in different places. If you are plugging your game console into your VCR or DVD player, your VCR or DVD player needs to be connected to the TV and then turned ON or your HyperScan™ console will not work. If you are connecting your game console directly to your TV and there is a cable box connected to your television, you will need to access the set up menu on SCAN BATTLE RESCAN your TV and change the source of the input just as if you were using a VCR or DVD player. You will probably need to use your television’s original remote to access the menu. If you do not have the original remote, refer to your TV’s owner’s manual for instructions on how to do this without the remote control. If you have an older TV set that does not have audio or video inputs you will need to purchase an “RF Modulator”. These can be purchased from most elec- tronic stores. If your TV /VCR/ DVD player is mono, and not stereo, you will need to use a Y adaptor (not included) to connect the jacks to your television set.4 Plug Controller(s) into the HyperScan™ console, as shown. Align arrow on plug with notch atop the Din socket on console, as shown. Main controller should be plugged into the left socket, additional controller into the right socket.5 Plug the DC jack of the AC adaptor into your HyperScan™ console.6 Plug AC plug of the AC adaptor into a 120 volt AC outlet.7 Turn ON your television.8 Turn on your HyperScan™ console. The LED should illuminate momentarily.SCAN BATTLE RESCAN453Not for all TV sets.Red Yellow WhiteGame Disc Player Card ScannerPowerDisc Release Controller Plugs

Don’t drop, hit or otherwise abuse your console or its componentsDon’t disassemble or try to repair this device. If problems occur, press the Power button OFF and unplug the AC adapter from the wall power source. Restart your Hyper Scan™ console by plugging in the AC adaptor and turn-ing it ON. If problems persist, consult the warranty information located at the end of these instructions.Don’t rapidly and repeatedly turn the power ON and OFF.This product contains a magnet. Do not use around items that are sensitive to or affected by magnetic ﬁelds.NOTE: Changes or modiﬁcations not expressively approved by the manufac-turer responsible for compliance could void the user’s authority to operate the equipment.SCAN BATTLE RESCANUsing Intellicard™ Collectible Game CardsHold your game card by the lower right corner, with the character illustra-tion facing down. Slowly scan the upper section of your card within one half inch above the center of the glow-ing red panel on your game console. After being prompted, you will have ﬁve seconds to scan your card. You will hear a sound conﬁrming that the encrypted information has been deci-phered/accepted and your character will appear onscreen momentarily. During gameplay you may scan your modiﬁcation (MOD) cards to enhance and customize your character’s ﬁghting skills.Caring For Intellicard™ Game CardsAlthough the patented technology embedded in our IntelliCard™ Game Cards is quite durable, please do not mishandle or mistreat your cards, as abuse will adversely affect their performance. DOs and DON’TsDosDisconnect from power source when not in use.Always switch OFF the console before connecting it to your TV/VCR/DVDWhen disconnecting any plug from the console, ﬁrst turn the console OFF and then carefully pull out by the plug rather then pulling the cables.Handle this device carefully.Store in a secure, dry area. Clean with a dry cloth.Don’tsDon’t plug/unplug adaptor from the HyperScan™ console while adaptor is plugged into AC outlet.Don’t plug/unplug your controller from the console while power is on.Don’t leave adapter plugged into AC outlet while console is not in use.Don’t use your HyperScan™ console around water or liquids.SCAN BATTLE RESCAN

Trouble ShootingProblem:There is not picture on your TV Screen.Solution(s): • Make sure the HyperScan™ Console, TV and VCR/DVD Player (if used) are plugged into power outlets. • Make sure that the DC Jack on the AC Adapter is ﬁrmly plugged into the DC Input Connector on the back of the console.• Make sure the power switches on the HyperScan™ Console, TV, and VCR/DVD Player (if used) are on.• Check the connections between the console and the TV or VCR/DVD Player (if used) and review the appropriate Setting Up Your System section in this booklet to be sure the system is set up correctly.• Make sure all cable connectors are securely plugged into the appropriate sockets.• Make sure that the INPUT settings are correct for your particular setup. (Review Setting Up Your System, point 3)• If you are using an RF Switch connection, make sure that the Channel Switch and TV are set to the same channel (3 or 4)• Check to be sure that the Game Disc is placed correctly into the console.• Make sure that the Game Disc is clean and in good condition. If dirty, wipe with a soft cloth from the center to the outside.SCAN BATTLE RESCANProblem:There is no sound or sound quality if poor.Solution(s): • Check if the TV volume is turned off or muted. • Check the audio connections between the HyperScan™ console and the TV or VCR/DVD Player (if used) and review pages 5 and 6 to be sure the system is set up correctly.• Make sure the AV cable is plugged into the “Input” connectors on the TV or VCR/DVD Player (if used) and not the “Output” connectors.• If you have a mono TV or VCR/DVD Player (if used) and left one of the audio cables uncon nected you may not get all game sounds. Use a “Y” adapter to get both left and right sound channels.• If your TV or VCR/DVD Player (if used) has both mono and stereo options, make sure it is set to match your setup.• Make sure that the input settings are correct for your particular setup. (Review page 5 point 3 on input select information)SCAN BATTLE RESCAN

Problem:The controller will not work properlySolution(s)• Make sure the power is off before plugging any controllers into the console.• Insert the Controller plug completely into the Controller socket on the front of the console.• Read the instruction booklet for the game you are playing to make sure you are using the correct Controller socket.• Make sure that no control buttons are depressed and the control stick is in the neutral position when you turn the power on.• Make sure you are using a HyperScan™ controller.SCAN BATTLE RESCANProblem:Game disc does not play.Solution(s)• Make sure you are playing a HyperScan™ game disc.• Check that the game disc label is facing up in the game disc player and that the game disc player lid is closed. Do not touch the laser lens.• Make sure the disc is clean. See page 6 for cleaning instructions.SCAN BATTLE RESCANProblem:The HyperScan™ console is not reading a HyperScan™ game card.Solution(s)• Make sure you place the game card at least 1/2 inch from the Hyper Scan™ sensor on the console. The card might not scan if it is held too far away. You will hear a sound conﬁrming that the card has been deciphered/accepted.• Make sure the character picture on your Hyper Scan™ Game Card is facing down when you scan it.• Check the Hyper Scan™ Game Card for damage. Bending a card may cause damage, preventing it from functioning correctly.• Read the game instructions and make sure you are scanning the Hyper Scan™ Game Card for that game.If you are experiencing additional problems or difﬁculties with your Hyper Scan™ system, please visit our web site at www.HyperScanGamer.com and go to the Trouble Shooting section.

FCC COMPLIANCE AND ADVI-SORY STATEMENT: This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interfer-ence, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna, 2) increase the separation between the equipment and the receiver, 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected, 4) consult the dealer or an experi-enced radio/TV technician for help. Mattel Inc. Consumer Relations, 636 Girard Ave East Aurora, NY (800) 524-8697. Any changes or modi-ﬁcation not expressly approved by the party responsible for the compli-ance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or speciﬁed additional components or accessories elsewhere deﬁned to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.NOTE: Changes or modiﬁcations not expressively approved by the manufac-turer responsible for compliance could void the user’s authority to operate the equipment.IMPORTANT ERGONOMIC INFOR-MATION: Long periods of repetitive motions using an improperly set-up workspace, incorrect body position, and poor work habits may be associ-SCAN BATTLE RESCANated with physical discomfort and injury to nerves, tendons, and muscles. If you feel pain, numbness, weakness, swelling, burning, cramping or stiffness in you hands, wrists, arms, shoulders, neck or back, see a qualiﬁed health care professional.Caution! Photosensitivity And SeizuresVideo games may cause a small per-centage of individuals to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of ﬂashing lights or pat-terns on a television screen. Certain conditions may induce epileptic symptoms even in persons who have no history or seizures or epilepsy.If you or anyone in your family has an epileptic condition, consult your physi-cian prior to game play.It is recommended that parent observe their children when their children play video games. If you or your child experiences any of the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disori-entation, or convulsions, discontinue use immediately and consult your physician.To Reduce The Likelihood Of A Seizure While Playing Video Games:Sit at least two feet from the screen in a well-lit room.Reduce the brightness of the screen.Do not play videogames if you are tired.Take frequent breaks from the games and look away from the screen every once in a while.Turn the game off if strange or unusual feeling or body jerks develop. Caution! Owners Of Plasma Screen And Projection Televisons To prevent potential permanent dam-age to your projection television, do not connect your HYPERSCAN™ console to a projection TV without ﬁrst reviewing your projection television instruction manual.Although Screensavers are built into our HYPERSCAN™ system, please remember to turn off your console and television when not in use to avoid the possibility of a burning a lasting image on screen.SCAN BATTLE RESCAN