Mattel Asia Pacific Sourcing K4386-06A1T HYPER SCAN User Manual users manual

Mattel asia Pacific Sourcing Ltd. HYPER SCAN users manual

Contents

users manual

SCAN BATTLE RESCAN
CONSOLEINSTRUCTIONSK4386-0920© 2006 Mattel, Inc. 333 Continental Blvd., El Segundo, CA 90245 U.S.A.  All Rights Reserved.Printed in ChinaTMCONSUMER INFORMATIONNeed Assistance?  In the US and Canada, service.mattel.com or 1-800-524-8697, M-F 8AM – 6PM, ET.  SCAN BATTLE RESCAN
Keep these instructions for future reference as they contain important information.Contents:1 HyperScan™ game console 1 HyperScan™ controller 1 A/C adapter (120v in/6v out) 3 RCA cables 1 X-Men game disc   6 X-Men game cards 1 Instruction ManualPlease remove all components and compare them to the content list. If any items are missing, please call 1-800-524-8697. Outside the U.S., please consult your telephone directory for a listing of your local Mattel office.SCAN BATTLE RESCANTable Of ContentsSetting Up Your SystemController ConfigurationUsing Intellicard™ Collectible  Game CardsDos And Don’tsTrouble ShootingSCAN BATTLE RESCAN
Setting Up Your System1   Set console on a flat, stable     surface.2   Open console and rest both    sides on the flat surface.3   With both your Hyper Scan™    console and your TV/VCR/   DVD player(s) in the off position,    locate the AV cable attached to    your Hyper Scan™ console;     there should be one yellow, one    red and one white connector.    These cables need to be plugged    into your TV or VCR/DVD    player. Plug the yellow connector    into the yellow “Video In” jack    on your TV or VCR/ DVD player.    Plug the white connector into the    white “Audio In” (L) jack on your    TV or VCR/DVD player and     plug the red connector into the    red “Audio In” (R) jack.  The video and audio inputs are    usually in the front or the    back of your TV, VCR or DVD.    However, depending on the type    of TV or VCR/DVD you have,    they could be in different places.   If you are plugging your game    console into your VCR or DVD    player, your VCR or DVD      player needs to be connected to    the TV and then turned ON or    your HyperScan™ console will    not work.  If you are connecting your game    console directly to your TV and    there is a cable box connected   to your television, you will need   to access the set up menu on  SCAN BATTLE RESCAN  your TV and change the source    of the input just as if you were    using a VCR or DVD player.     You will probably need to use    your television’s original remote    to access the menu. If you do   not have the original remote,    refer to your TV’s owner’s manual    for instructions on how to do this    without the remote control.  If you have an older TV set that    does not have audio or video    inputs you will need to purchase    an “RF Modulator”. These can    be purchased from most elec-   tronic stores. If your TV /VCR/   DVD player is mono, and not    stereo, you will need to use a Y    adaptor  (not included) to connect    the jacks to your television set.4   Plug Controller(s) into the    HyperScan™ console, as shown.    Align arrow on plug with notch    atop the Din socket on console,    as shown. Main controller should    be plugged into the left socket,    additional controller into the right    socket.5   Plug the DC jack of the AC    adaptor into your HyperScan™    console.6   Plug AC plug of the AC adaptor    into a 120 volt AC outlet.7   Turn ON your television.8   Turn on your HyperScan™   console. The LED should    illuminate momentarily.SCAN BATTLE RESCAN453Not for all TV sets.Red Yellow WhiteGame Disc Player Card ScannerPowerDisc Release Controller Plugs
SCAN BATTLE RESCANRight Shoulder – Action Left Shoulder – ActionRight Trigger – Action Left Trigger – Action IMPORTANT! Only HyperScan™  controllers are supported by this console, the use of other joysticks, paddles or peripherals may cause damage to your system and/or will cause it to not function properly.11  Follow instructions on your    TV screen.12  Use your controller to navigate    the menus. (see page tbd) Using Hyperscan™ ControllerNote: These instructions indicate general, non-specific functions.  Precise actions will be described in detail in the instruction manual of your game pack.SCAN BATTLE RESCANStart SelectForwardLeftBackRightRed – ActionBlue – ActionYellow – ActionGreen – Action9   Locate the Input/Video button on    your TV or the remote control.     Press the Input/Video button until    your reach a screen that displays    the HyperScan™ logo.10  Open the CD compartment and    place the game disc, printed side    up, into the compartment on the    center hub.  DO NOT TOUCH    THE LENS!  You may then close    the compartment cover.
Don’t drop, hit or otherwise abuse your console or its componentsDon’t disassemble or try to repair this device. If problems occur, press the Power button OFF and unplug the AC adapter from the wall power source. Restart your Hyper Scan™ console by plugging in the AC adaptor and turn-ing it ON. If problems persist, consult the warranty information located at the end of these instructions.Don’t rapidly and repeatedly turn the power ON and OFF.This product contains a magnet.  Do not use around items that are sensitive to or affected by magnetic fields.NOTE: Changes or modifications not expressively approved by the manufac-turer responsible for compliance could void the user’s authority to operate  the equipment.SCAN BATTLE RESCANUsing Intellicard™ Collectible Game CardsHold your game card by the lower right corner, with the character illustra-tion facing down. Slowly scan the upper section of your card within one half inch above the center of the glow-ing red panel on your game console.  After being prompted, you will have five seconds to scan your card. You will hear a sound confirming that the encrypted information has been deci-phered/accepted and your character will appear onscreen momentarily.  During gameplay you may scan your modification (MOD) cards to enhance and customize your character’s fighting skills.Caring For Intellicard™ Game CardsAlthough the patented technology embedded in our IntelliCard™ Game Cards is quite durable, please do not mishandle or mistreat your cards, as abuse will adversely affect their performance. DOs and DON’TsDosDisconnect from power source when not in use.Always switch OFF the console before connecting it to your TV/VCR/DVDWhen disconnecting any plug from the console, first turn the console OFF and   then carefully pull out by the plug rather then pulling the cables.Handle this device carefully.Store in a secure, dry area. Clean with a dry cloth.Don’tsDon’t plug/unplug adaptor from the HyperScan™ console while adaptor is plugged into AC outlet.Don’t plug/unplug your controller from the console while power is on.Don’t leave adapter plugged into AC outlet while console is not in use.Don’t use your HyperScan™ console around water or liquids.SCAN BATTLE RESCAN
Trouble ShootingProblem:There is not picture on your TV Screen.Solution(s):  • Make sure the HyperScan™ Console, TV and    VCR/DVD Player (if used) are plugged into    power outlets. • Make sure that the DC Jack on the AC Adapter is    firmly plugged into the DC Input Connector on the    back of the console.• Make sure the power switches on the    HyperScan™ Console, TV, and VCR/DVD Player    (if used) are on.• Check the connections between the console and    the TV or VCR/DVD Player (if used) and review    the appropriate Setting Up Your System section    in this booklet to be sure the system is set up    correctly.• Make sure all cable connectors are securely    plugged into the appropriate sockets.• Make sure that the INPUT settings are correct    for your particular setup. (Review Setting Up Your    System, point 3)• If you are using an RF Switch connection, make    sure that the Channel Switch and TV are set to the    same channel (3 or 4)• Check to be sure that the Game Disc is placed    correctly into the console.• Make sure that the Game Disc is clean and in    good condition. If dirty, wipe with a soft cloth    from the center to the outside.SCAN BATTLE RESCANProblem:There is no sound or sound quality if poor.Solution(s): • Check if the TV volume is turned off or muted. • Check the audio connections between the    HyperScan™ console and the TV or VCR/DVD    Player (if used) and review pages 5 and 6 to be    sure the system is set up correctly.• Make sure the AV cable is plugged into the    “Input” connectors on the TV or VCR/DVD Player    (if used) and not the “Output” connectors.• If you have a mono TV or VCR/DVD Player (if    used) and left one of the audio cables uncon   nected you may not get all game sounds. Use    a “Y” adapter to get both left and right sound    channels.• If your TV or VCR/DVD Player (if used) has both    mono and stereo options, make sure it is set to    match your setup.• Make sure that the input settings are correct for    your particular setup. (Review  page 5 point 3 on    input select information)SCAN BATTLE RESCAN
Problem:The controller will not work properlySolution(s)• Make sure the power is off before plugging any    controllers into the console.• Insert the Controller plug completely into the    Controller socket on the front of the console.• Read the instruction booklet for the game you    are playing to make sure you are using the    correct Controller socket.• Make sure that no control buttons are depressed    and the control stick is in the neutral position    when you turn the power on.• Make sure you are using a HyperScan™   controller.SCAN BATTLE RESCANProblem:Game disc does not play.Solution(s)• Make sure you are playing a HyperScan™    game disc.• Check that the game disc label is facing up in    the game disc player and that the game disc    player lid is closed. Do not touch the laser lens.• Make sure the disc is clean. See page 6 for    cleaning instructions.SCAN BATTLE RESCANProblem:The HyperScan™ console is not reading a  HyperScan™ game card.Solution(s)• Make sure you place the game card at least    1/2 inch from the Hyper Scan™ sensor on the    console. The card might not scan if it is held too    far away. You will hear a sound confirming that    the card has been deciphered/accepted.• Make sure the character picture on your    Hyper Scan™ Game Card is facing down when    you scan it.• Check the Hyper Scan™ Game Card for    damage. Bending a card may cause damage,    preventing it from functioning correctly.• Read the game instructions and make sure you    are scanning the Hyper Scan™ Game Card for    that game.If you are experiencing additional problems or difficulties with your  Hyper Scan™ system, please visit our web site at  www.HyperScanGamer.com and go to the Trouble Shooting section.
FCC COMPLIANCE AND ADVI-SORY STATEMENT: This hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interfer-ence, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna,  2) increase the separation between the equipment and the receiver,  3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected,  4) consult the dealer or an experi-enced radio/TV technician for help. Mattel Inc. Consumer Relations, 636 Girard Ave East Aurora, NY (800) 524-8697. Any changes or modi-fication not expressly approved by the party responsible for the compli-ance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.NOTE: Changes or modifications not expressively approved by the manufac-turer responsible for compliance could void the user’s authority to operate the equipment.IMPORTANT ERGONOMIC INFOR-MATION: Long periods of repetitive motions using an improperly set-up workspace, incorrect body position, and poor work habits may be associ-SCAN BATTLE RESCANated with physical discomfort and injury to nerves, tendons, and muscles.  If you feel pain, numbness, weakness, swelling, burning, cramping or stiffness in you hands, wrists, arms, shoulders, neck or back, see a qualified health care professional.Caution! Photosensitivity  And SeizuresVideo games may cause a small per-centage of individuals to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or pat-terns on a television screen.  Certain conditions may induce epileptic symptoms even in persons who have no history or seizures or epilepsy.If you or anyone in your family has an epileptic condition, consult your physi-cian prior to game play.It is recommended that parent observe their children when their children play video games. If you or your child experiences any of the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disori-entation, or convulsions, discontinue use immediately and consult your physician.To Reduce The Likelihood Of A Seizure While Playing Video Games:Sit at least two feet from the screen in a well-lit room.Reduce the brightness of the screen.Do not play videogames if you  are tired.Take frequent breaks from the games and look away from the screen every once in a while.Turn the game off if strange or unusual feeling or body jerks develop.  Caution! Owners Of Plasma Screen And Projection Televisons To prevent potential permanent dam-age to your projection television, do not connect your HYPERSCAN™ console to a projection TV without first reviewing your projection television instruction manual.Although Screensavers are built into our HYPERSCAN™ system, please remember to turn off your console and television when not in use to avoid the possibility of a burning a lasting image on screen.SCAN BATTLE RESCAN

Navigation menu