Max Deluxe R-6BT Multi Band Radio User Manual
Max Deluxe Limited Multi Band Radio
User Manual
R-6BT
OPERATION OF USB FUNCTION
1.Turn on the volume button open the power, press function
button to the USB insert the USB disk.
OPERATION OF BLUETOOTH FUNCTION:
CONTROLS
(1) HANDLE
(2) TELESCOPIC ANTENNA
(3) AM/FM/SW BAND SELECTOR
(4) DIAL SCALE
(5) TURNING KNOB
(6) POWER ON/OFF &VOLUME CONTROL KNOB
(7) RADIO/BLUETOOTH/USB (OPTIONAL)
(8) AC JACK
(9) HEAD PHONE JACK
(10) DC JACK
(11) F. FWD USB
(12) REW USB
(13) PLAY USB/PICK UP PHONE/CALL BACK
(14) USB JACK
(15) BASS KNOB
(16) MIC(FOR BLUETOOTH USE ONLY)
POWER SUPPLY
Battery operation open the battery door and insert 3pcs
UM-1 batteries
OPERATION FOR RADIO
1.Open the Volume, press the function button to Radio, then select
FM, AM or SW1-7 position.
2.Turn the turning knob to desired the channel.
3.Turn the Volume adjusted Sound level.
SPECIFICATIONS
Power Supply AC: 120V/60Hz-240V/50Hz
Speaker : 4 ohm 3w
Frequency : AM:530-1600KHz
SW:3.6-19MHz
FM:88-108MHz
1 6
2.Press to play the next songs. Press play the return
songs.
3.Long Press to increase the sound level. Long press
to reduce the sound level.
4.Press to play/pause the songs.
3.Long Press to increase the sound level. Long press
to reduce the sound level.
4.Press to play/pause the songs.
5.When the phone calling, press answer the call. Long
press hang up. Double fast press call back.
5.Long Press change to Bluetooth function.
6.Long Press change to USB function.
AM/FM/SW1-7 9 BAND RADIO
OPERATING INSTRUCTION
/
/
1.Turn on the volume button open the power, press function
button to the BT. Use the mobile phone to connect the radio.
2.Press play the next songs. Press to play the return
songs.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC Statement
Multi Band Radio