Maxon CIC MX-V30 GSM/GPRS Handset User Manual mx v30 0621

Download:
Mirror Download [FCC.gov]
Document ID	464248
Application ID	aR8C/NKUbAbEsHizrEh5nw==
Document Description	User manual pt2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	240.99kB (3012435 bits)
Date Submitted	2004-08-31 00:00:00
Date Available	2004-08-31 00:00:00
Creation Date	2004-06-21 09:51:50
Producing Software	Acrobat Distiller 5.002001-01-22:00 for Macintosh
Document Lastmod	2004-08-25 14:13:02
Document Title	mx-v30(0621)
Document Creator	QuarkXPress¢â: LaserWriter 8 KH-8.7.1
Document Author:	5

mx-v30(0621)
2004.6.21
9:41 AM
Page 60
MOB.INTERNET
Security
1.Move the Cursor & Select a “Security”.
Input Security related information.
Certificates : To view Certificate necessary to setup Connection.
Contracts : To view Contracts necessary to setup Connection.
Browser Options
to select “Browser Options”.
To set up Browser function related Options.
MOB.INTERNET
Rename Profile
1.Press
to select “Rename Profile”.
To change the name of selected/setup Profile.
Cache
1.Press
to select “Cache”.
To select whether load Internet page or not from Cache.
1.Press
Enable CSS : To set up using CSS or not (On/Off).
Enable Refresh : To set up Refresh function (On/Off).
Enable Narrow Rend : To set up Narrow Rend function (On/Off).
Show Images : To select/setup printing Images function (Never/Ask/Always).
Play Sound : To select/setup Sound function (Never/Ask/Always).
Load Object With MIME : To select/setup Object Load function (Never/Ask/Always).
History size : Number of link you visited before.
60
Cache mode : To set up Cache mode (On/Off).
Clear cache : To clear contents of Cache.
Cookies
1.Press
to select “Cookie”.
Enable Cookies : To select which Cookie may remain.
Clear Cookies : To clear Cookies saved in the browser.
61
mx-v30(0621)
2004.6.21
9:41 AM
Page 62
MOB.INTERNET
MOB.INTERNET
OFFLINE PAGES
Push Settings
1.Press
to select “Push Settings”.
Push SL Settings : WAP Push Service Setup Function.
-Never: Set the selected Push message cannot be loaded through the browser.
-If On Same Host: Permit if currently visited page is the same host with it.
-Always: Always permitted.
Push Security : Security related setup function of WAP Push Service.
-Never Accept: Do not accept any push message.
-Accept authentication: Accept if certified host.
-Accept Non Wap: Accept push message from currently visited host.
-Accept Always: Accept all available messages.
1.Press
to select “Offline Pages”.
Change current accessing site into Offline.
2.Select Save Page Offline.
3.Enter Title for Save Page Offline.
4.Press
PUSH
1.Press
Clear Recent Pages
1.Press
to select “Clear Recent Pages”.
To delete URL List on History.
62
to save it.
Press
to select “Push”.
to select one of the following options.
Delete all
Sort : Sort by date / s ort by type / Sort by sender
63
mx-v30(0621)
2004.6.21
ORGANIZER
9:41 AM
Page 64
The Organizer is a practical tool that will help you to keep track of your appointments and alert
you of meetings, celebrations, events etc.
MONTH VIEW
1.Press
CALENDAR
To set and view appointments.
1.Press
DAY VIEW
1.Press
2.Use
and
to select “Calendar”.
to select “Day View”.
to select a schedule and press
ORGANIZER
to select “Month View”.
- A calendar is displayed with appointments. the date with an appointment is
shown in green color, while a selected date is in violet.
- The wallpaper for calendar changes as a new season is selected.
2.Use
to view it.
In Day view, you can check appointments for the day.
You can scroll through the entries and use [
] to view an appointment.
Press [
] to add an appointment and edit or delete it.
Press
to select a date and press
to select “Option”.
Day view : To move to ‘Day view’
New : To add a new appointment.
3.Select an appointment and press
Press
to view appointments on the particular date.
to do the following options.
to select “Option”.
Month : To move to ‘Month v iew’.
New : To add an appointment.
You are to select one of the following categories.
(Meeting/ Birthday / Memo)
Delete : To delete a selected appointment.
View : To display a selected appointment.
Press
to select “Option”.
New : To add an appointment.
You are to select one of the following categories. (Meeting/ Birthday / Memo).
Delete : To delete a selected appointment
View : To display a selected appointment.
64
65
mx-v30(0621)
2004.6.21
9:41 AM
Page 66
ORGANIZER
NEW
1.Press
ORGANIZER
to select “New”.
In ‘New’ you can enter a new appointment.
Define it as a Meeting, Birthday or a Memo.
Select one and enter the relevant
information in the text editor.
Use [
] to scroll through the entry fields:
DELETE
1.Press
to select “Delete”.
2.Select one of the following items and press
1. All : Delete all appointments.
2. Week Old : Delete the appointments that is a week old.
3. Month Old : Delete the appointments that is a month old.
.Subject
To enter a title for an appointment.
3.Press
to confirm it.
.Start and End date,
.Start and End time.
To set a date and a time to start or end an appointment
.Reminder time
To set a reminder to give you an alert to appointment.
66
67
mx-v30(0621)
2004.6.21
9:41 AM
Page 68
ORGANIZER
ORGANIZER
TASKS
ALARM
To put down things to remember.
1.Press
1.Press
to select “TASKS”.
The Tasks list is an electronic notepad that will help you to remember things to do.
The list is accessed in the Organizer folder.
TIME
1.Press
If no tasks are entered in the list, the screen will display “No entries”.
NEW
1.Press
1.Press
to create a new task.
3.Move to each field to enter data.
Subject : Enter a title for a task.
Due Date : Enter a due date for a task.
Reminder : Mark it up and you are prompted to enter its date and time.
Reminder Date
Reminder Time
If one or more tasks are entered, you can choose among the following
options: Delete all, Delete, New
68
2.Enter a time.
to select “Time”.
to select “Sound”.
SOUND
to select “Options”.
2.Select a “New” item and press
1.
2.
3.
4.
5.
to select “Alarm”.
You can enter up to 10 different tasks, each with a maximum
20 characters, and set an alarm to remind you.
Sound - Alarm1~5.
ALARM ON
1.Press
to select “Alarm on”.
2.To mark up ‘Alarm on’ to enable the alarm.
69
mx-v30(0621)
2004.6.21
9:41 AM
Page 70
ORGANIZER
GAMES
MINI GOLF
CALCULATOR
To use the calculator.
1.Press
Press [
1.Press
to select “Calculator”.
] to clear a digit or press and hold [
] to clear all inputs.
Enter a figure and press a +, -, *, / as a assigned in navigation keys.
Enter another figure, then press
The result will be show on the bottom line.
Example
Enter 200.
Use
to moved to a ‘+’ and press
Enter 25 then press
select it.
to select “Minigolf”.
Let ’s play the simplified golf game using your handset.
This is a miniature golf.
Only putter is used.
Put the ball in the hole by avoiding walls and barriers.
There are holes with pars 3 to 5.A player with the least number of
hits,minus even par numbers in each hole,becomes a winner.
Regardless of total score,each hole has its winner for the hole and
gains 1 point.
Stroke(1P,2P),Match Play(2P)are available.
The result 225 will be show in bottom line.
If you want to continue the calculation, do not select =,
To finish the calculation, select
70
71
mx-v30(0621)
2004.6.21
9:41 AM
Page 72
GAMES
GAMES
MIRROR IN ACTION
1.Press
to select “Mirror In Action”.
The objective is to shoot down enemy ships using reflecting
mirrors to aim the lasers.
Be careful because when you use a laser you need to recharge it.
During this time your enemy has a chance to regroup and attack
you when you are not in a position to defend yourself.
As you move onto subsequent levels the mirrors are positioned at
different angles making your task harder.
72
PUSH MAN
1.Press
to select “Parking War”.
The objective is to unlock the traffic grid by carefully maneuvering
the cars and trucks around each other towards the exit.
The game is time based so there is no time to lose as you test
your wits moving the vehicles back and forth to smooth out the jam
as quickly as possible.
73
mx-v30(0621)
2004.6.21
MYPHONE
9:41 AM
Page 74
The default settings with regard to the sounds and display are easily changed.
SMS ALERT
AUDIO
1.Press
MYPHONE
1.Press
to select “Audio”.
to select “SMS Alert”.
Alert Tune - 10 different SMS alert tunes.
Alert Type - Select one of the available options. (1.Tone only / 2. Tone +Vib / 3.Vibration)
INCOMING CALL
1.Press
Volume - Volume can be controlled in 7 levels through [
Alert Tune - Select one among 10bells, 14melodies and some downloaded
melodies.
Alert Type - Select one of the available options .
(1.Tone only / 2.Tone+Vib / 3.Tone after Vib / 4.Vibration Only)
Volume - Volume can be controlled in 7 levels through [
74
] and [
].
to select“Incoming Call”.
] and [
KEYPAD TONE
1.Press
to select “Keypad tone”.
2.Select one of the available keypad tone type and press
to save it.
75
mx-v30(0621)
2004.6.21
9:42 AM
Page 76
MYPHONE
MYPHONE
INFO TONES
1.Press
WALLPAPER
to select “Info Tones”.
2.Select On or Off and press
1.Press
to save it.
to select “Wallpaper”.
2.Select the Image or Animations.
3.Select the desired Wallpaper using the
4.Press the
or
and
key.
, then the Idle screen is changed.
CONNECT TONE
1.Press
to select “Connect Tone”.
2.Select On or Off to set call connection tone.
Press
to save it.
FOLDER TUNE
1.Press
to select “Folder Tune”.
2.Select One of the available Slide Tune and press
76
to save it.
77
mx-v30(0621)
2004.6.21
9:42 AM
Page 78
MYPHONE
MYPHONE
SELECTIONS
GREETING
You can enter a greeting, set an animation for start-up or shutdown and set a greeting time.
1.Press
to select “Greeting”.
1.Press
to select “Selections”.
2.You are to set one of the following options for either start-up or shutdown.
1.Start-up : Greeting / Animation / None
2.Shutdown : Animation / None
TEXT
1.Press
to select “Text”.
2.Enter a greeting of your own and press
to save it.
GREETING TONE
1.Press
to select “Greeting tone”.
2.On or Off to set a greeting tone when the phone is turned on.
78
79
mx-v30(0621)
2004.6.21
9:42 AM
Page 80
MYPHONE
MYPHONE
CALLER GROUPS
TUNE
You can create Caller Groups from the contacts in your phone book to identify a caller by sound alone.
1.Press
1.Press
2.Select one of the available tunes and press
to select “Caller groups”.
to select “Tune”.
to save it.
You can designate a tune for a group.
2.Use
3.Press
to moved to a caller group.
to select it.
SMS
1.Press
to select “SMS”.
2.Select one of the available alerts and press
to save it.
You can designate a type of alert for a group.
80
81
mx-v30(0621)
2004.6.21
9:42 AM
Page 82
MYPHONE
MYPHONE
FOLDER MANAGER
LCD & LED
Your phone has a backlight LCD display with full graphic capability.
You can set contrast, backlight time and led light.
1.Press
1.Press
to select “Folder manager”.
to select “LCD & LED”.
Press
BACKLIGHT TIME
1.Press
to select “Baclight time”.
2.Select one of the following backlight time and press
to select one of the following options.
Create new folder
Sort : Sort alphabetic / Sort by size / Sort by type / Sort by date
to save it.
You can adjust how long the Backlight stays on. (20/40/60 seconds)
LED LIGHT
1.Press
to select “LED light”.
2.mark it up to enable the LED service indicator.
82
83
mx-v30(0621)
SETTINGS
2004.6.21
9:42 AM
Page 84
The Settings menu is used to set basic parameters for the phone such as language,
time & date, data transfer, security, network and call settings.
SUMMER TIME
TIME & DATE
1.Press
SETTINGS
to select “Time & date”.
1.Press
to select “Summer Time”.
2.Mark up ‘Summer time’ through
to apply daylight saving time.
Box If you wish to apply daylight saving time
SET TIME / DATE
1.Press
to select “Set time / Date”.
2.You are to set the present time & date.
WORLD TIME
1.Press
2.Use
and
to select “World time”.
to select a timezone and press
to save it.
3.You are to select your current location.
DATE FORMAT
1.Press
to select “Date Format”.
2.Select one of the date formats and press
to save it.
84
85
mx-v30(0621)
2004.6.21
9:42 AM
Page 86
SETTINGS
SETTINGS
LANGUAGE
DATA
The display will change to the selected language.
You are set parameters for data transmission from your laptop or PC.
1.Press
1.Press
2.Use
to select “Language”.
to select a language.
3.Select one of the available languages and press
4.The display will change to the selected language.
to select “Data”.
to save it.
DATA CABLE
1.Press
to select “Data Cable”.
2.Set each parameter and press
to save it.
- Bit rate : (300 / 1200~ / 115200)
- Reset : You are to reset it.
GPRS
1.Press
to select “GPRS”.
2.Set each parameter and press
to save it.
1. Attach on
2. Accept calls : You are to mark this up to enable it.
86
87
mx-v30(0621)
2004.6.21
9:42 AM
Page 88
SETTINGS
SETTINGS
SECURITY
1.Press
to select “Security”.
CHANGE PIN1
1.Press
to select “Change PIN 1”.
2.Enter your old pin code followed by the new code.
ENABLE PIN 1
1.Press
to select “PIN code 1”.
2.Mark it up to enable PIN code 1 and press
to save it.
3.Confirm it when prompted. Press
That if you enter an incorrect PIN code three times in succession, your SIM card will lock and you
must enter the PUK code to unlock. PIN and PUK codes are either supplied with your phone or must
be obtained from your network provider or place of purchase.
88
89
mx-v30(0621)
2004.6.21
9:42 AM
Page 90
SETTINGS
CHANGE PIN2
1.Press
SETTINGS
to select “Change PIN 2”.
2.Enter your old pin code followed by the new code.
3.Confirm it when prompted. Press
90
NETWORK
1.Press
to select “Network”.
SELECTION
1.Press
to select “Select network”.
2.Select Automatic or Manual.
91
mx-v30(0621)
2004.6.21
9:42 AM
Page 92
SETTINGS
PREFERRED NET
1.Press
SETTINGS
to select “Preferred net”.
The phone will search this list from the top. Left softkey options roll-up enables you
to Add or Insert a new network. If you use Add, the new network will be added to
the end of the list (having the lowest priority). Insert will insert the network in the
list where the cursor is placed.
ADD NETWORK
1.Press
to select “Add network”.
To add a new network, start by selecting an empty network entry from the Add network menu. Press OK. A text editor will appear. Enter the name(input english) of
the network followed by the Mobile Country Code (MCC) and the Mobile Network
Code (MNC). This information is supplied by your network operator.
BAND
1.Press
to select “Band”.
2.Select one of the band and press
to save it.
92
CALL SETTINGS
1.Press
CALL FORWARD
1.Press
to select “Call settings”.
to select “Call forward”.
.Unconditional:
To forward all incoming calls to a specified number.
.All unanswered:
To forward all calls that you do not answer within a specified period of time.
.No reply:
To forward calls those are not replied.
.Not reachable:
To forward calls when you are out of network range.
.Busy:
To forward calls when your phone is busy.
.Status all:
To summarize the status of call forward options.
.Cancel all:
To cancel all call forward settings
A specific number can be designated for each option, and you can activate, view or
cancel the present status. Follow the on screen instructions.
93
mx-v30(0621)
2004.6.21
9:42 AM
Page 94
SETTINGS
CALL WAITING
1.Press
SETTINGS
to select “Call waiting”.
Redial
1.Press
to select “Redial”.
This function notifies you of another call during a telephone conversation. Enter the menu to
Activate or Cancel Call waiting or to see the Status. If Call waiting is active, and you are called
during a conversation, you will hear a faint ringing tone in the background. To answer the new
caller without losing contact with the original party:
Activates redialing of your last unsuccessful call. The number will be redialed after 5
seconds (1 time), after 1 minute (3 times) and after 3 minutes (10 times). If this
sequence is completed without connection established, the number must be manually dialed for a new attempt.
-Enter Options roll-up menu.
Select Switch calls.
-conduct the conversation with the new party and select Switch calls to return to the first caller.
Select Join calls to conduct a three-party conversation.
To manually abort the redial sequence, press [
To manually redial last number called, press [
OPTIONAL FUNCTION
1.Press
to select “Optional func.”.
This menu contains various settings to facilitate daily use.
].
] twice in a row.
Shortcut dial
1.Press
to select “Shortcut dial”.
If you activate Shortcut dial, you can dial phone numbers from the Shortcut list by
pressing just one or two digits.
Any key answer
1.Press
to select “Any key answer”.
Set the phone to answer a call with any key, (except), e.g. the earpiece
volume control on the side, to answer your calls.
94
95
mx-v30(0621)
2004.6.21
9:42 AM
Page 96
SETTINGS
CALL BARRING
1.Press
SETTINGS
to select “Call barring”.
You can lock the telephone to reject incoming calls or bar outgoing calls, domestic or international.
Call barring is a password protected network service, and details should be acquired from your network.
.Cancel all - To cancel all call barring settings.
CALL TIME
1.Press
to select “Call time”.
You can keep track of your calling expenses by setting the “Call time” feature. Scroll to Billing.
Press [
]. Enter the submenus:
.Total calls - To view the total amount of time and units used.
.Last call - To view the duration of the last call.
.Set max units - To set a maximum of units available for a call.
.Outgoing calls - To cancel all call barring features of outgoing calls, or decide what
type of outgoing calls is to be barred.
(1.Cancel all / 2.All calls / 3.All internat. / 4.Except to home)
.Units left - To view the number of units left on your account.
.Incoming calls - To cancel all call barring features of incoming calls or decide what
type of incoming calls is to be barred.
(1.Cancel all / 2.All incoming / 3.When abroad)
.Currency - Displayed if supported by your network.
.Password - To set a password.
.Price/unit - To enter a network price for the units.
DTMF TONE
1.Press
to select “DTMF tone”.
Enabling DTMF tones allows you to remote control various telephone connected
devices, e.g. listen to your home telephone answering machine, or charge your
SIM.
96
Activates key lock after 30 sec. of idleness.
97
mx-v30(0621)
2004.6.21
9:42 AM
Page 98
SETTINGS
RESET SETTINGS
1.Press
CHAPTER 4
to select “Reset settings”.
Return all settings to factory defaults.
The power goes off automatically.
PHONEBOOK
•Look up
•New
•PB Settings
•Voice mail no.
98
99
mx-v30(0621)
2004.6.21
9:42 AM
Page 100
PHONEBOOK
Your can use either the SIM card or the built-in Contacts database as your
Phonebook. The database can store up to 250 contacts, with three phone numbers per contact along with the contact’s complete postal address and email
address. Number of contacts on the SIM card depends on your network. Choice
of phonebook is the Options soft key menu in look up menu. (Select use SIM/Use
Phone)
PHONEBOOK
LOOK UP
When you select “Use SIM” in options. (Press
1.Press
Press [
]and you will see
the following items displayed.
New
Use phone
Delete
Edit
Search
View
Call
to select “SIM: Look up”.
2.Scroll to find the desired
contact and press
3.Press
to make a call.
When you select “Use Phone” in options (Press
1.Press
to select “Look up”.
2.Scroll to find the desired
contact and press
3.Press
100
to make a call.
Press [
]and you will see
the following items displayed.
New
Use SIM
Sorting
Delete
Edit
Search
View
Call
101
mx-v30(0621)
2004.6.21
9:42 AM
Page 102
PHONEBOOK
PHONEBOOK
When “Use Phone” is selected.
1.Move to each field and press
NEW
To add a contact to the SIM phonebook:
1.Press
When “Use SIM” is selected.
1.Move to each field and press
to enter its information accordingly.
- A text editor appears.
- Enter a name and press [
].
Scroll [
].
- Enter a phone number and press [
2.Press
to save it after entering information.
If you have chosen Phone as your phonebook, up to three numbers
can be entered along with address information for each contact.
102
to enter its information accordingly.
].
All the above data can be entered.
1.First name 2.Last name 3.Home 4.Mobile 5.Work 6.Calling group
7.Address 8.Zip code 9.City 10.Province 11.Country 12.E-mail
2.Press
to save it after entering information.
If a different SIM card is inserted in the phone, you will be alerted of the option to copy data from this.
You may also copy data to SIM cards, thus enabling you to share contact information with friends and
colleagues. Copy features are located in the PB Settings submenu. (Optional)
103
mx-v30(0621)
2004.6.21
9:42 AM
Page 104
PHONEBOOK
PB SETTINGS
To alter settings in the Phonebook:
1.Press
PHONEBOOK
FIXED LIST
1.Press
to select “Fixed list”.
Use this to create a list of allowed numbers. When Active
is ticked, the user can
only access the listed numbers. Requires PIN 2 (see p. 90).
SHORTCUT DIAL
1.Press
to select “Shortcut dial”.
Make calls using only one or two keys. Define a key combination (2-21) for your
most accessed contacts. To include or remove a contact in the shortcut dial list,
select a position and:
BARRED LIST
1.Press
to select “Barred list”.
Use this to create a list of barred numbers (if supported by network).
If activated, the user can not access barred numbers. Requires PIN 2.
-Select New or Delete in the Options softkey menu.
-Choose the appropriate contact from the phone book.
Press [
].
-Any previous contact on the selected position will be overwritten.
If you select SIM as your Phonebook, you will not be able to use Contacts database
features (three phone numbers, address information), but still allowed to use caller
groups or shortcut dial.
104
OWN NUMBER
1.Press
to select “Own number”.
Store your own number for future reference. Some SIM cards will install your phone
number automatically. If yours is not, simply enter it in the editor and press [
].
105
mx-v30(0621)
2004.6.21
9:42 AM
Page 106
PHONEBOOK
MEMORY STATUS
1.Press
to select “Memory status”.
Displays the used and free memory available in the respective phonebooks.
Reset Phone memory or SIM memory on left softkey.
Be advised that this will erase all entries in the Phonebook that is reset.
LOCATION
1.Press
to select “Location”.
PHONEBOOK
VOICE MAIL NO.
1.Press
2.Enter a Voice mail number.
- The options softkey allows you to do the following items.
(Lookup / Back / Save)
Service numbers.
This is a network service and the menu will only appear if your network operator supports this service.
The menu may contain various services, depending on the network.
2.Select Use Phone or Use SIM.
106
107
mx-v30(0621)
MEMO
2004.6.21
9:42 AM
Page 108
CHAPTER 5
MISCELLANEOUS
•Menu summary
•Cellular phone in brief
•Abbreviations and acronyms
•Questions and answers
•Technical data
108
109
mx-v30(0621)
2004.6.21
9:42 AM
Page 110
MENU SUMMURY
Messages
SMS
Write new SMS
SMS Inbox
SMS Outbox
Delete
Delete Inbox
Delete Outbox
Delete all
SMS Template
SMS Settings
Format
S.C. number
Validity
SMS Bearer
Selections
SMS class 0
Verify send
Use template
Reply path
110
MENU SUMMURY
MMS
New message
Inbox
Drafts
Sent
Templates
Outbox
Settings
Exit
Cell Broadcast
Read
CB Settings
CB Enabled
Channels
Languages
Internet
Wap
Homepage
Bookmarks
Recent pages
Enter address
Resume
Settings
Offline pages
PUSH
Inbox
Drafts
Sent
Templates
Friends
Fun
Important
Organizer
Calendar
Day view
Month view
New
Meeting
Birthday
Memo
Delete
All
Week old
Month old
Tasks
Alarm
Alarm 1~3
Select all
Cancel all
Calculator
Games
Mini Golf
Mirror in action
Parking war
111
mx-v30(0621)
2004.6.21
9:42 AM
Page 112
MENU SUMMURY
Myphone
Audio
Incoming call
Alert tune
Alert type
Volume
SMS Attention
Alert tune
Alert type
Volume
Duration
Keypad Type
Natural Tone
DTMF
Mute
Info Tones
On
Off
Connect Tone
On
Off
Folder tune
On
Off
112
Wallpaper
MENU SUMMURY
Greeting
Text edit
Selections
Greeting tone
Caller groups
Private
Business
Friends
Family
Others
LCD & LED
Contrast
Backlight time
LED light
Folder manager
Settings
Auto key lock
Time & Date
Set time/Date
Summer Time
Time zone
Date format
Language
Data
Data cable
Bitrate
Reset
GPRS
Attach on
Accept calls
Security
PIN Code 1
Change PIN 1
Change PIN 2
Network
Select Network
Automatic
Manual
Preferred net
Add network
Call settings
Call Forward
Unconditional
Activate
Cancel
Status
All Unanswered
Activate
Cancel
Status
No Reply
Activate
Cancel
Status
Not Reachable
Activate
Cancel
Status
Busy
Activate
Cancel
Status
Status All
Cancel All
Call waiting
Activate
Cancel
Status
Optional func.
Redial
Shortcut Dial
Any key answer
113
mx-v30(0621)
2004.6.21
9:42 AM
Page 114
MENU SUMMURY
Call Barring
Cancel All
Outgoing Calls
Cancel All
All Calls
All Internat.
Except to Home
Incoming Calls
Cancel All
All Incoming calls
when abroad
Password
Call time
Total calls
Last call
Set max units
Units left
Price/Unit
Currency
DTMF tones
Reset settings
114
MISCELLANEOUS
Phone Book
Look Up
New
Settings
Shortcut dial
Fixed list
Barred list
Own Number
Location
Memory status
Voice Mail no.
CELLULAR PHONE IN BRIEF
Your cellular phone is essentially a highly sophisticated radio, basically no different from any other
two-way radio system.
The ingenuity of the cellular system lies in the splitting of the broadcasting environment into a multitude
of relatively small cells with low-power transmitters.
This “Cellular approach” to radio communication allows for extensive frequency reuse so that
millions of people can use their mobile phones simultaneously although the number of frequencies are
limited. The broadcasting cells are commonly illustrated as hexagons, typically 10 square miles in area
with the base station in the center. This arrangement allows for non-adjacent cells to use the same
frequencies without risk of interference.
Your cellular phone is in constant contact with the nearest base station. As you move from cell to cell, e.g.
while driving in your car, the base station you are approaching takes over when you are within reach.
This happens within split seconds without your noticing it.
All you experience is a stable and clear connection.
However, not all network operators provide the same coverage in all areas. Hence, if you travel near the
limit of your network’s coverage, you may experience difficulties in maintaining the connection.
The same may hap pen if the radio signal is blocked by obstacles such as high trees, hills or buildings,
or if you are inside a heavily reinforced concrete building.
115
mx-v30(0621)
2004.6.21
9:42 AM
Page 116
MISCELLANEOUS
ABBREVIATIONS AND ACRONYMS
To remedy the situation move closer to the nearest mast if possible or seek higher ground. If you are
inside a building, try moving towards a window.
What is roaming? Roaming is the technique that allows subscribers to move from one cell to another or
from one network to another without affecting the call.
What is digital? Early cellular phones relied on analogue systems.
Analogue radio systems transmit the voice signal in its original form, whereas digital technology
transforms the microphone signal into number sequences (digits) and transmit these.
When received, the digital signal is decoded so that you can hear the sender’s voice.
Digital signals do not degrade in quality as long as the data is received, and they can be
compressed to take up less memory.
What is Tri Band? A tri band cell phone has the capability to automatically switch between
frequencies and can thus operate on two or more frequency bands, e.g. 900,1800, and 1900 Mhz.
What is GSM? Global System for Mobile communications is the most widespread standard for
digital communication in Europe, Australia and in large parts of Asia and Africa.
GSM uses frequencies in the 900 and 1800 Mhz bands.
What is APN? APN stands for Access Point Name and is basically an URL address on the Mobile
Internet.
What is GPRS? General Packet Radio System is a service protocol built on GSM technology.
GPRS allows several mobile phone users to share the same connection. Charges may thus be based on
the amount of transferred data rather than on airtime.
116
MISCELLANEOUS
What is CSD? A wireless service protocol used for WAP. CSD stands for Circuit Switched Data and will
enable continuous connection and payment by the amount of data transferred.
What is SIM? Subscriber Identity Module or SIM is the little gold-plated plastic card that you get from your
network operator and which holds the unique data the network needs to identify your phone.
What is PIN and what is PUK? Access to use a cell phone is most often protected by a code known as
“PIN” - Personal Identification Number. Your SIM card comes with a default PIN that you can change to
any code you prefer. See p. 88 for details. If you forget your code, or by mistake enter a faulty code three
times in a row, the SIM card will lock. To unlock, you must enter the Personal Unblocking Key or “PUK”
code that came with your SIM card.
What is IMEI? IMEI stands for International Mobile Equipment Identifier and is an identification system
that can recognize every mobile phone by a specific number. If a phone is stolen, the IMEI system is
capable of blocking it on all network operators that support the system.
What are MCC and MNC? Mobile Country Code is a code that identifies the country in which the
subscriber lives. Mobile Network Code identifies the network operator.
What is DTMF? Dual Tone Multi Frequency or DTMF is a paging and remote control protocol that allows
you to control certain functions via your phone, e.g. listening to your answering machine.
117
mx-v30(0621)
2004.6.21
9:42 AM
Page 118
MISCELLANEOUS
MISCELLANEOUS
What is Cell Broadcast?
Cell Broadcast is a service from your network provider. With CB, you will be alerted when
entering a “cheap zone” or you can obtain traffic information, weather reports and other important information sent to you as text messages. Some providers also offer sports results, news bulletins or even
commercials. If offering CB services, your network will forward a list of services and the relevant channels to enter.
Q:My phone does not switch on when I press the key ?
A:The keypress has been too short or the phone has shut down because the battery power
level is too low to make calls. Recharge the battery fully.
What is WAP?
Wireless Application Protocol or WAP is a standard that allows you to access parts of the Internet, known
as “Mobile Internet” via your cell phone. Using WAP will open many services to you, i.e. news and weather forecasts, ordering services and goods, accessing databases and more.
What is an URL?
Uniform Resource Locator or URL is an address system used on the Internet. All WAP homepages have
a unique address, allowing browsers to distinguish one from the other. An URL always start with the text
string: http://wap followed by the address.
What is ISP?
ISP stands for Internet Service Provider.
QUESTIONS AND ANSWERS
Q:Stand-by time seems too short ?
A:You have made excessive use of the games or the Organizer or display light has been on
continously due to unintentional key activation. Apply Keypad lock in left softkey menu.
Q:My phone displays: ‘PLEASE INSERT SIM’?
A:You must insert the SIM before you can use the phone. If it is already installed, remove and
clean the blank area with a dry cloth, then reinsert.
Q:My phone displays: ‘INVALID SIM’?
A:The phone is SIM-locked and will not accept the inserted SIM. Insert the correct SIM or
contact your dealer.
Q:My phone displays: “EMERGENCY CALLS ONLY”?
A:Your SIM card is not properly installed or configured, or you are out of network range.
Q:My phone displays: “NO NETWORK” ?
A:You are outside network range or there is no clear path to the transmitter.
If you are inside a building, try moving towards a window.
118
119
mx-v30(0621)
2004.6.21
9:42 AM
Page 120
MISCELLANEOUS
MISCELLANEOUS
Q:Some calls are not processed. What is wrong?
A:A call bar has been set to restrict phone usage. Check call barring and cancel as necessary.
Q:Can I use my phone inside a car?
A:Road safety comes first. Always keep your eyes on the road if you are driving.
You can install a “Hands free” set (see. p. 8) if you need to drive and talk at the same time.
Always comply with local legislation.
If your car is equipped with airbags, check safety precautions with your car dealer.
See also “Warnings” .
Q:Someone else is receiving my calls. What is wrong?
A:The phone has been set to forward your calls to another number.
Cancel call forwarding as necessary.
Q:Can I send and receive emails and surf the Mobile Internet on my phone?
A:Yes. Your phone has WAP capability, which means that you can access the Mobile Internet
from your phone.
For sending and receiving emails, please contact your network operator.
Q:What type of networks are supported?
A:Check the technical specifications on p. 122.
Q:How do I clean my phone if it becomes soiled?
A:See “Cell phone care” on p. 126.
Q:Are cellular phones dangerous to my health?
A:No unambiguous scientific evidence exists at this point of time. We recommend that you keep
abreast with the advice given by your domestic health authorities. See also “Warnings” .
Q:My phone has been lost or stolen. What do I do?
A:Contact your network operator immediately to close your account and prevent misuse.
Report your phone stolen to local police.
Q:How do I reset my phone to factory defaults?
A:Enter the Settings menu and scroll to “Reset all”.
120
121
mx-v30(0621)
2004.6.21
9:42 AM
Page 122
MISCELLANEOUS
CHAPTER 6
TECHNICAL DATA
Physical properties
Size : W-43.5 H-81.5 D-22 (mm)
Weight : 75g
Display : 65K Color (128X160 pixels)
Performance
EGSM : 900 DCS :1800 PCS : 1900
GPRS : Class 10
Standby : Standard-72h
Talk time : Standard-5h
Charging time : Standard-100
30min,
Radiation (SAR) : 2 w/kg averaged over a
10g cube
Communication features
Long SMS (459 latin chr.)
EMS (Sound & Picture attachment)
Call wait & Call hold
Conference call (Up to 5 participants)
Call forwarding & Call barring
Billing (AoC)
WAP
122
Personalizing features
Greeting
Wallpaper
40 Polyphonic ring tones
5 Caller groups
Organizing features
Calendar
Tasks
Alarm
Calculator
Leisure
3 games
Accessories
Contact local retailer
Woman software
SAFETY
•Safety Information for Wireless Handheld Phones
•Cell Phone Care
•Driving Safety
•Electronic Devices
•Other Safety Guidelines
•Cautions
•Warning
•FCC RF exposure
123
mx-v30(0621)
2004.6.21
9:42 AM
Page 124
SAFETY
SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES
Read This Information Before Using Your Handheld Portable Cellular Telephone.
EXPOSURE TO RADIO FREQUENCY SIGNALS
Your wireless handheld portable telephone is a low power radio transmitter and receiver. when it is ON,
it receives and also sends out radio frequency (RF) signals.
In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with
safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards
previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986) *
ICNIRP (1996) *
SAFETY
The design of your phone complies with the FCC guidelines (and those standards).
˙;
American National Standards Institute;
National Council on Radiation protection and measurements; International Commission on Nonionizing
Radiation Protection.
ANTENNA CARE
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate FCC regulations.
Those standards were based on comprehensive and periodic evaluations of the relevant scientific
literature.
For example, over 120 scientists, engineers, and physicians from universities, government health
agencies, and industry reviewed the available body of research to develop the ANSI Standard (C951).
124
125
mx-v30(0621)
2004.6.21
9:42 AM
Page 126
SAFETY
CELL PHONE CARE
Your phone is a state-of-the-art electronic device that will serve you well for many years provided it gets
a minimum of attention and care from you. You should never attempt to open the phone casing.There are
no user-serviceable parts inside,and you might damage sensitive electronic circuits and components.
Unauthorized disassembly will void the warranty. You should never leave your phone in the window of
your car or otherwise expose it to strong sunlight or excessive heat for a prolonged period of time as this
may damage it. You should never handle your phone with wet hands or expose it to moisture or liquids of
any kind.Continuous changes from a cold to a warm environment may lead to condensation inside the
phone,resulting in corrosion and possible damage. If you pack your cell phone in your suitcase during
travel,beware not to damage it.Cramming a suitcase may crack the LCD display.Remember to switch off
your phone during air travel. Like with all other radio devices,touching the built-in antenna area during
telephone conversation may impair the quality and lead to shorter stand-by time due to increased power
consumption.
The battery.Your phone is equipped with a high-performance Li-Ion battery. Optional battery types may
be available, check with your local retailer. Observe the maintenance guidelines and your battery should
give you a long service life.
- At the beginning of the battery’s life, fully charge and discharge (let it go flat)three times.
- Avoid repeated short charging.It is preferable to let the battery go flat and then recharge it
completely.
- Avoid charging in strong heat or extreme cold.Ambient room temperature is preferable.
- Don’t keep a battery near a fire and attempt to disassemble it.
- Use only the battery approved by manufacturer
- Never replace battery by an incorrect type.
126
SAFETY
- Never try to open the battery as it contains substances that might be harmful if swallowed or
allowed to contact unprotected skin.
- Never short-circuit the battery,as it may overheat and course a fire.Keep away from jewelry and
other metal objects.
- Never dispose of the battery by burning it.It could explode and release harmful substances into
the environment.
- Never dispose of the battery with your regular household waste.Take it to a hazardous material
collection point.
The charger.Use only the charger supplied with the phone.Newer pull charger cord to release it from
mains,pull the charge itself.
Cleaning & storing.Your phone should always be handled with care,protected from dirt,dust and
damp.To avoid scratches,never place the phone face down.
If cleaning is necessary,switch the phone off and wipe carefully with a a soft,slightly damp (not wet)cloth.
Allow the phone to dry completely before switching it on.Never use solvents for cleaning.
If you wont use your phone for some time,fully charge the battery and store the phone in a dry place away
from direct sunlight.The phone should be switched off during storage.
Point store member:
-Never disassemble the phone or battery.
-Never expose the phone to heat or strong sunlight.
-Never expose the phone to moisture or liquids of any kind.
-Do not paint the phone or otherwise block keypad,microphone or earpiece function,i.e.with
stickers
-The battery has its optimum performance in an ambient temperature of +5 °C to +50 °C
127
mx-v30(0621)
2004.6.21
9:42 AM
Page 128
SAFETY
DRIVING SAFETY
Talking on the phone while driving is extremely dangerous and is illegal in some states. Remember,
safety comes first. Check the laws and regulations on the use of phones in the areas where you drive.
Always obey them.
Also, if using your phone while driving please:
Give full attention to driving. Driving safely is your first responsibility.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call, if driving conditions require.
If you must use the phone while driving, please use one-touch, speed dialing, and auto answer
modes.
An airbag inflates with great force. DO NOT place objects, including both installed or portable
wireless equipment, in the area over the airbag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
WARNING:
Failure to follow these instructions may lead to serious personal injury and possible
property damage.
128
SAFETY
ELECTRONIC DEVICES
Most modern electronic equipment is shielded from RF energy.
However, certain electronic equipment may not be shielded against the RF signals from your wireless
phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of six (6”)
inches be maintained between a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with the independent research
by and recommendations of Wireless Technology Research.
If you have a pacemaker:
ALWAYS keep the phone more than six inches from your pacemaker when the phone is
turned on.
Do not carry the phone in a breast pocket.
Use the ear opposite the pacemaker to minimize the potential for interference.
If you have any reason to suspect that interference is taking place, turn your phone OFF
immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference,
you may want to consult your service provider (or call the customer service line to discuss alternatives).
129
mx-v30(0621)
2004.6.21
9:42 AM
Page 130
SAFETY
SAFETY
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if they
are adequately shielded from external RF energy Your physician may be able to assist you in obtaining
this information.
Turn your phone OFF in healthcare facilities when any regulations posted in these areas instruct you to
do so. Hospitals or healthcare facilities may be using equipment that could be sensitive to external RF
energy.
Aircraft
FCC Regulations prohibit using your phone while in the air. Switch OFF your phone before
boarding an aircraft.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.
Check with the manufacturer or its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF where posted notices so require.
130
OTHER SAFETY GUIDELINES
Blasting Areas
To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas
posted: “Turn off two-way radio.” Obey all signs and instructions.
Potentially Explosive Atmospheres
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include
fueling areas such as gas stations; below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air
contains chemicals or articles, such as grain, dust, or metal powders; and any other area where you would
normally be advised to turn off your vehicle’s engine.
131
mx-v30(0621)
2004.6.21
9:42 AM
Page 132
SAFETY
CAUTION
Your Handheld Portable Telephone is a high quality piece of equipment.Before operating the
equipment,read all instructions and cautionary markings on (1)AC Adaptor (2)Battery and (3)Product
Using Battery.
1.DO NOT use this equipment in an extreme environment where high temperature or
high humidity exists.
2.DO NOT abuse the equipment.Avoid striking,shaking or shocking.When not using
the unit,lay down the unit to avoid possible damage due to instability.
3.DO NOT expose this equipment to rain or spilled beverages.
4.DO NOT use unauthorized accessories.
5.DO NOT disassemble the phone or its accessories.If service or repair is required,
return unit to an authorized Audiovox cellular service center.If unit is
disassembled,the risk of electric shock or fire may result.
6.DO NOT short -circuit the battery terminals with metal items etc.
7. Use only the battery approved by manufacturer
8. DO NOT replace battery by an incorrect type.
132
SAFETY
WARNING
The following offenses are punishable by fine, imprisonment, or both:
Using obscene, indecent, or profane language.
Using the unit to give off false distress calls.
Wiretapping or otherwise intercepting a telephone call, unless that person has first obtained the
consent of the parties participating in the call.
Making anonymous calls to annoy, harass, or molest other people.
Charging to an account without authorization to avoid payment for service.
Refusing to yield a party line when informed that it is needed for an emergency call
(It is also unlawful to take over a party line by stating falsely that it is needed for an emergency).
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: -- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
133
mx-v30(0621)
2004.6.21
9:42 AM
Page 134
SAFETY
SAFETY
FCC RF EXPOSURE
WARNING! Read this Information before using your phone.
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in
Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated transmitters.
Those guidelines are consistent with the safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC guidelines and these international standards.
Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or
attachments could impair call quality, damage the phone, or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin,
a minor burn may result. Please contact your local dealer for replacement antenna.
134
Body-worn Operation
This device was tested for typical body-worn operation with the back of the phone kept 0.5 inches
(1.27cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance
of 0.5 inches (1.27cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. All belt-clips, holsters and similar accessories used by
this device must not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with FCC RF exposure limits and should be avoided.
Vehicle Mounted External Antenna(optional, if available)
A minimum separation distance of 7.9 inches (20cm) must be maintained between the user/bystander and
the vehicle mounted external antenna to satisfy FCC RF exposure
requirements.
Note: For more information about RF exposure, please visit the FCC website at www.fcc.gov
135
mx-v30(0621)
2004.6.21
9:42 AM
Page 136
DECLARATION OF CONFORMITY
Conformity Assessment Principles
Complies with the essential requirements of Article 3 of the R&TTE Directive 1999/5/EC,
if used for its intended use and that the following standards has been applied:
1. Health (Article 3.1.a of the R&TTE Directive)
Applied standard(s) : EN50360:2001
2. Safety (Article 3.1.a of the R&TTE Directive)
Applied standard(s): EN 60950:2000
3. Electromagnetic compatibility (Article 3.1b. of the R&TTE Directive)
Applied standard(s): EN 301 489-1: v1.4.1 and EN 301 489-7: v1.2.1
4. Efficient use of the radio frequency spectrum (Article 3.2 of the R&TTE Directive)
Applied standard(s): EN 301 511: v 9.0.2
We hereby declare that all essential radio test suites have been carried out and that
the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC.
136

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:06:21 09:51:50Z
Modify Date                     : 2004:08:25 14:13:02+01:00
Page Count                      : 39
Creation Date                   : 2004:06:21 09:51:50Z
Mod Date                        : 2004:08:25 14:13:02+01:00
Author                          : 5
Producer                        : Acrobat Distiller 5.002001-01-22:00 for Macintosh
Metadata Date                   : 2004:08:25 14:13:02+01:00
Creator                         : 5
Title                           : mx-v30(0621)
Has XFA                         : No

EXIF Metadata provided by EXIF.tools