Users Manual
MC-11 USER MANUAL Title MC-11 Intercom User Manual Version V1.0 Release 2015.10. CONTENTS 1. MC-11 INTERCOM FEATURES ..................................................................................... 3 1.1. BUTTONS................................................................................................................................. 4 1.2. VOLUME CONTROL .................................................................................................................. 4 1.3. GROUP SETTING ...................................................................................................................... 4 1.4. ID SETTING ............................................................................................................................. 5 1.5. TALK FUNCTION ..................................................................................................................... 5 1.6. SPECIFICATIONS .................................................................................................................. 7 Title MC-11 Intercom user Manual Version Release 1. MC-11 intercom Features Antenna LED LCD MODE Mode Button Talk Button UP Button Power Button Down Button USB Jack Headset Jack AUX Jack V1.0 2015.10. Title MC-11 Intercom User Manual Version V1.0 Release 2015.10. 1.1. Buttons Button Function Description Power Power ON/OFF Talk Talk channel On/Off Mode To set group mode or ID mode Up VOL : To set volume level higher Down VOL: To set volume level lower 1.2. Volume Control MC-11 intercom has volume control function that serves user to change volume level wanted. How to set VOL is displayed right after power is turned on. The default mode is volume control mode In Volume mode, volume can be set with UP/DOWN button in the range of 0 ~ 6. 1.3. Group setting MC-11 intercom has group setting function that serves user to change group to communicate. How to set After turned on, phone is in volume control mode. To change volume mode into group mode, press Mode buttons Long. Title MC-11 Intercom user Manual Version Release V1.0 2015.10. In Group mode, group can be set with UP/DOWN button in the range of 0 ~ 51. 1.4. ID Setting MC-11 intercom has ID setting function to communicate with each other. Each intercom has to have an unique Identification number in the same group and Master’s ID must be set “00” . How to set After turned on, phone is in volume control mode. To change volume mode into group mode, press Mode Button Long Press Function button to move ID change mode as below. In ID change mode, ID can be set with UP/DOWN button in the range of 0 ~ 99. 1.5. TALK Function MC-11 intercom serves TALK function to let users start to talk with others. In case of Master, the default talk mode in ON, and in case of Slaves the default talk mode is in inactive state. Therefore Master can start to talk after power is turned on, Slaves are required to press Mode button then Talk function is activated. Talk function is available in 5 phones including Master at the same time. While 4 slaves are using Talk, if another slave tries to talk by pressing mode button, Master release one of 5 slaves that accessed first and allows the latest one to use Talk. In this way 5 Title persons can keep talking. MC-11 Intercom User Manual Version V1.0 Release 2015.10. Title MC-11 Intercom user Manual Version Release V1.0 2015.10. 1.6. SPECIFICATIONS ITEM SPECIFICATION Radio Frequency Type Type ISM 903MHz ~ 926.5MHz Wireless Intercom Unit Radio Interface ISM 2.4GHz: GFSK Modulation with Frequency Hopping Voice Codec Rx Sensitivity 16bit/8KHz -95dBm < 100ms 250Kbps Li-ion Battery @3.7V/ TBD 1100mA Helical Antenna 10hr Typ. Avg. 100mA 300M @ Class 1 50 Hz ~ 4 kHz Voice Latency Data Rate Battery Antenna Talk Time for Microphone Power Consumption(Microphone) Distance Range(LOS) Frequency response MC-11 Channel Table Frequency range : 903MHz ~926.5MHz Channel Frequency Channel Frequency Channel Frequency 903 20 913 40 923 903.5 21 913.5 41 923.5 904 22 914 42 924 904.5 23 914.5 43 924.5 905 24 915 44 925 905.5 25 915.5 45 925.5 906 26 916 46 926 906.5 27 916.5 47 926.5 907 28 917 907.5 29 917.5 10 908 30 918 11 908.5 31 918.5 12 909 32 919 13 909.5 33 919.5 14 910 34 920 15 910.5 35 920.5 16 911 36 921 17 911.5 37 921.5 18 912 38 922 19 912.5 39 922.5 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antennas used for this transmitter must be installed to provide a separation distance of at least 5mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. European CE notice to users and product statements This product is CE marked according to the provisions of the R&TTE Directive(99/5/EC). Hereby, Maytel Co., Ltd declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please contact http:// swmaytel@naver.com Maytel Co., Ltd 417 Doosan Venture Digm 126-1, Pyeongchon-dong, Dongan-gu, Anyang-si, 431-070, South Korea Tel: +82-31-487-5508 Fax: +82-31-440-9331 URL: swmaytel@naver.com CONTACT INFORMATION Manufacturer Address : 417 Doosan Venture Digm 126-1, Pyeongchon-dong, Dongan-gu, Anyang-si, 431-070, South Korea To locate in-country Maytel Co., Ltd, distributors of the Multicom please refer to the Maytel Co., Ltd Website http://swmaytel@naver.com These distributor(s) represent local contacts for this product. CORPORATE HEADQUARTERS: Maytel Co., Ltd 417 Doosan Venture Digm 126-1, Pyeongchon-dong, Dongan-gu, Anyang-si, 431-070, South Korea Tel: +82-31-487-5508 Fax: +82-31-440-9331 Web: http://swmaytel@naver.com This device complies with Industry Canada license-exempt RSS standard(s). Operation is Subject to the following two condition: (1) this device may not cause interference ,and (2) this device must accept any interference, including interference that may cause undesired operation of the device. EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY Maytel Co., Ltd 417 Doosan Venture Digm 126-1, Pyeongchon-dong, Dongan-gu, Anyang-si, 431-070, South Korea declare under our sole responsibility that the product(s) Multicom – MC-11 to which this declaration relate(s) is in conformance with the following standards: EN 301 489-1 V1.9.2:2011 EN 301 489-17 V2.2.1:2012 EN 60950-1:2006/A2:2013 EN 300 328 V1.8.1:2012 following the provisions of the 1999/5/EC Directives.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:01:15 09:14:23+09:00 Modify Date : 2016:01:19 11:25:41+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2016:01:19 11:25:41+09:00 Producer : doPDF Ver 7.3 Build 394 (Windows 7 Home Premium Edition (SP 1) - Version: 6.1.7601 (x64)) Format : application/pdf Document ID : uuid:c9ad1e75-2263-44be-89e6-ca6dd33ca218 Instance ID : uuid:4f8904c2-b86f-4cc6-8a6c-f0f35d635826 Page Layout : OneColumn Page Mode : UseNone Page Count : 12EXIF Metadata provided by EXIF.tools