Medion Gopal X4545 Md97612 Operating Instructions X4x45 Generic EN 5.5 RC1

Medion-Gopal-X4345-Md97462-Operating-Instructions-789853 medion-gopal-x4345-md97462-operating-instructions-789853

GoPal X4545 (MD97612) - Operating Instructions GOPAL_X4545_M40_(MD_97612)_EN Free User Guide for Medion GOPAL Series GPS, Manual

GoPal X4345 (MD97462) - Operating Instructions GOPAL_X4345_M40_(MD_97462)_EN Free User Guide for Medion GOPAL Series GPS, Manual

2015-08-19

: Medion Medion-Gopal-X4545-Md97612-Operating-Instructions-789854 medion-gopal-x4545-md97612-operating-instructions-789854 medion pdf

Open the PDF directly: View PDF .
Page Count: 102

Download
Open PDF In Browser	View PDF

Notes on these Operating Instructions
The operating instructions and installation guidelines have been organized so that subjectrelated information can be easily found using the contents list.
Note
You will find comprehensive Operating Instructions for navigation on
relevant CDs/DVDs and at the online help of the device.
The section "Frequently Asked Questions" contains answers to questions that are frequently addressed to our customer service department.

Document Your Navigation Unit
It is important to record the details of your Navigation Unit and the purchase thereof. In
the event you require warranty support you may be asked for this information. The serial
number can be found on the back of the device:
Serial Number

....................................................................................

Password

....................................................................................

Information note

....................................................................................

SuperPIN

....................................................................................

UUID

....................................................................................

Date of Purchase

....................................................................................

Place of Purchase

....................................................................................

Please record the serial number into any appropriate guarantee documents.
You will enter your own password and information note using the Security Function.
The SuperPIN and the UUID will be provided following the activation of the Security Function. See Page 17.

Quality
The components used have been selected to provide a product that has a high level of
functionality and is user friendly, safe and reliable. A well-balanced hardware and software
design allows us to offer you a technologically advanced navigation system, which is both
practical and enjoyable to use.

Service
Our customer care is there to provide support and assistance whenever you have questions or are experiencing problems.
This manual contains a section specific to Customer Service starting on page 41.

Copyright © 2010, version 20/05/2010. All rights reserved. Microsoft , MS-DOS , and Windows are
®
registered trademarks of Microsoft Corporation in the U.S. and other countries. Pentium is a registered trademark of Intel Corporation. The names of actual companies and products mentioned herein
may be the trademarks of their respective owners. Information in this document is subject to change
without notice.

Contents
Safety and Maintenance .................................................................................. 1
Safety Instructions ......................................................................................................... 1
Data Security ................................................................................................................. 1
Operating Environment ................................................................................................. 2
Repair ............................................................................................................................ 2
Ambient temperature .................................................................................................... 2
Electromagnetic Compatibility ...................................................................................... 3
Connection ................................................................................................................... 3
Power supply through Car Adapter ............................................................................ 3
Cabling ......................................................................................................................... 3
Information about the Regulatory Compliance according to R&TTE .............................. 4
Battery Operation .......................................................................................................... 4
Maintenance ................................................................................................................. 4
Care of the Display ........................................................................................................ 5
Recycling and Disposal .................................................................................................. 5
Transport ...................................................................................................................... 6
Supplied Items ................................................................................................. 7
Views ............................................................................................................... 8
Front Components ........................................................................................................ 8
Back Components ......................................................................................................... 9
Top Components .......................................................................................................... 9
Bottom Components ................................................................................................... 10
Active holder ............................................................................................................... 10
Back components ........................................................................................................ 11
Initial Set up .................................................................................................. 12
I. Charging the Battery ................................................................................................ 12
II. Power Supply .......................................................................................................... 13
Car Adapter.............................................................................................................. 13
Alternative possibility of charging the battery........................................................... 13
III. Switching on the Device ......................................................................................... 14
IV. Installing the Navigation Software .......................................................................... 16
General Operating Instructions ..................................................................... 17
Switching on/off the device ......................................................................................... 17

iii

Security ......................................................................................................... 18
Storing the password and the information note .......................................................... 18
Making settings ........................................................................................................... 19
SuperPIN and UUID ..................................................................................................... 20
Fingerprint Sensor (optional) ...................................................................................... 21
Benefits of this technology ....................................................................................... 21
Storing a fingerprint ................................................................................................. 21
Making subsequent settings..................................................................................... 23
Password Request .................................................................................................... 24
Resetting the Navigation System ................................................................... 25
Reset ........................................................................................................................... 25
Switching the Device off Completely / Hard Reset ....................................................... 26
Navigation ..................................................................................................... 27
Safety Instructions for Navigation ................................................................................ 27
General Instructions ................................................................................................. 27
Notes for Use in a Vehicle ......................................................................................... 28
Aerial Orientation ........................................................................................................ 29
I. Mounting the Car Holder ......................................................................................... 29
II. Attaching the Navigation System ............................................................................. 30
III. Connecting the Car Adapter ................................................................................... 31
IV. Starting the Navigation Software ............................................................................ 32
Warning function for traffic monitoring points ............................................................ 33
Speech commands (optional) ........................................................................ 36
Handsfree Facility by means of Bluetooth (optional) .................................... 42
Starting the Bluetooth Application............................................................................... 42
Overview of the Main Screen ................................................................................... 43
Pairing the Navigation Device and the Mobile Phone ............................................... 44
Accepting incoming calls ......................................................................................... 45
Making Calls ............................................................................................................ 45
During a Call ............................................................................................................ 46
MP3 Player (optional) ................................................................................... 47
Overview of the Main Screen ....................................................................................... 47
Select a Title and Move it into the List of Favourites ..................................................... 48
List of Favourites ...................................................................................................... 49
List of the established bookmarks ................................................................................ 49
Picture Viewer (optional) .............................................................................. 50
Operating the Picture Viewer....................................................................................... 50
Main Screen ................................................................................................................ 50
Full Image View........................................................................................................ 51
iv

Travel Guide (optional) ................................................................................. 53
Overwiev of the Main Screen ....................................................................................... 53
Alarm Clock (waking function) (optional) .................................................... 55
Overview of the main screen ....................................................................................... 55
Description of the Interfaces ........................................................................................ 56
Setting the System Time........................................................................................... 57
Selecting an Alarm Signal ......................................................................................... 58
Setting the Volume .................................................................................................. 59
Snooze Function ...................................................................................................... 60
Ending the Alarm Clock Application ......................................................................... 60
Contact Manager (optional) .......................................................................... 61
Create the contacts database ....................................................................................... 61
Operating the Contact Manager .................................................................................. 62
Overview of the Main Screen ....................................................................................... 62
Storing and Processing Contacts ................................................................................. 62
Sudoku (optional) ......................................................................................... 64
Main Screen ................................................................................................................ 64
Description of the switch fields .................................................................................... 65
Overview of the game field.......................................................................................... 66
Description of the control buttons ........................................................................... 66
FAQ ................................................................................................................ 67
Customer Service ........................................................................................... 68
Faults and Possible Causes .......................................................................................... 68
Additional Support ...................................................................................................... 68
Appendix ....................................................................................................... 69
Special CleanUp Function............................................................................................ 69
Synchronisation with the PC .......................................................................... 72
I. Installing Microsoft® ActiveSync® ............................................................................ 72
II. Connecting with the PC........................................................................................... 73
Mass Storage mode.................................................................................................. 73
ActiveSync®-Mode..................................................................................................... 74
Alternative possibility of charging the battery........................................................... 74
III. Working with Microsoft® ActiveSync® .................................................................... 74
GPS (Global Positioning System) ................................................................... 75
Dead Reckoning (gyroscope) ......................................................................... 76
TMC (Traffic Message Channel) (optional) .................................................... 77
PayTMC / Trafficmaster (optional) ............................................................................... 77
Trafficmaster (optional) ............................................................................................... 77

Connecting the TMC Dipole Aerial (optional) .......................................................... 78
The Steering Wheel Remote (optional) ......................................................... 79
Safety Instructions ....................................................................................................... 79
Batteries and Proper Treatment ................................................................................... 79
Button Layout ............................................................................................................. 80
Installation .................................................................................................................. 81
Working with Memory Cards ......................................................................... 83
Inserting Memory Cards .............................................................................................. 83
Removing Memory Cards ............................................................................................ 83
Accessing Memory Cards ......................................................................................... 83
Data Exchange via Card Reader ................................................................................ 84
Additional Card Material .............................................................................................. 84
Transfer of card material to a memory card .............................................................. 84
Alternate method of installing Navigation Software (using a memory card) ............ 85
Transferring Installation Files and Map Material to the Internal Memory .................. 85
Specifications ................................................................................................ 86
Model Overview ............................................................................................. 87
FCC Compliance Statement ........................................................................................ 88
Conditions of Warranty for the United Kingdom ........................................... 89
Index ............................................................................................................. 95

Safety and Maintenance
Safety Instructions
Please read this section carefully and follow all the instructions provided. This will help
ensure reliable operation and prolong the life of your appliance.
Keep the packaging and the user instructions for future reference or enquiries at a later
date. If you pass the article on to another person, you should pass on these instructions.


Never allow children to play with electrical equipment unsupervised.



Keep the packaging materials, such as plastic bags away from children as there is a
danger of suffocation.



Never open up the housing of the appliance. This contains no user-serviceable
parts. If the housing is opened there is a danger of electric shock.



Please operate your navigation system with an approved power supply only.



Do not place any objects on the appliance and do not exert any pressure on the
display. Otherwise there is a danger that the screen will break.



To avoid damage, do not touch the screen with sharp objects. We recommend using only the stylus provided or finger when using the touch-screen functionality of
the product.



There is a risk of injury if the display breaks. If this should occur, use protective
gloves to pack the broken parts and contact customer support to arrange for disposal. Then wash your hands with soap, since there is a possibility that chemicals
may have escaped.

Switch the appliance off immediately, or do not switch it on, and contact Customer Service.


If the housing of the appliance becomes damaged or liquid may have leaked into it
the components must be checked by Customer Service in order to avoid damage!

Data Security


Every time your data is updated or modified backup copies should be made on an
external storage medium. The supplier assumes NO liability for data loss or damage
to data storage units, and no claims can be accepted for damages resulting from
the loss of data or for consequential damages.

Operating Environment
Failure to follow these instructions may lead to your appliance being damaged. In cases
where products are damaged as a result of misuse or neglect the associated guarantee will
be considered void.


Keep your navigation System and all connected devices away from moisture and
avoid exposure to dust, heat and direct sunlight, especially in the car.



Make sure you prevent your appliance from getting wet, e.g. from rain and hail, at
all times. Please note that moisture can even build up inside a protective pouch as a
result of condensation.



Avoid heavy vibrations and shaking.



Please note the device should be installed vertically, this will ensure that the device
remains secure within its holder.

Repair


Please contact our Service Centre if you encounter technical problems with your
appliance.



In the event a repair becomes necessary, please use Medion authorised Service
Partners. The address can be found on the back of your guarantee card or online at
www.medion.co.uk

Ambient temperature



The appliance will operate effectively at an ambient temperature of between +32°F
and +95°F (0° C and 35° C) and at a relative humidity of between 10% and 90%
(non-condensing).



In the powered down state the appliance can be stored at between -4°F and
+140°F (-20° C + to 60° C).



Store the appliance in a safe location, away from high temperatures (e.g. when
parking or from direct sunlight).

Safety and Maintenance

Electromagnetic Compatibility


When connecting additional or other components the “Electromagnetic Compatibility Directive” (EMC) must be adhered to. Please note that only screened cable
(maximum 10ft) should be used with this appliance.



For optimal performance, maintain a distance of at least 10 ft. from sources of highfrequency and magnetic interference (televisions, loudspeaker systems, mobile
telephones etc.).This will help to avoid malfunctions and loss of data.



Electronic devices emit electromagnetic waves during operation.
These emissions are harmless, but can interfere with other devices operated in close
proximity.
While our devices are tested and optimised for electromagnetic compliance in our
laboratories, interference during operation may still occur in the device itself and
with other devices in its proximity.
Should such interference occur, try to eliminate it by adjusting the positions of and
the distances between the devices.
Before driving, please ensure that the electronic systems of the car are working
properly.

Connection
When connecting your appliance it is important to observe the following instructions:

Power supply through Car Adapter


The car adapter should only be connected to the lighter socket of a car
(car battery = DC 12V , truck battery = DC 24V ). If you are in any doubt about
the power source in your car, please contact your car manufacturer.

Cabling


Arrange cables so that they do not cause unnecessary obstruction or risk entanglement or snaring. E.g. ensure that the cables cannot be trod on, or tripped over.



Do not put any objects on the cable, because it could be damaged if you do so.



Do not use any force and pay attention to the correct orientation of the plug when
connecting the cables and plugs.



Do not permit any great forces to be exerted on the plug connections, from the
side, for example. This will lead to damage in and to your device if you do so.



Avoid short circuiting and broken cable by not crushing or bending it sharply.

Safety and Maintenance

Information about the Regulatory Compliance according
to R&TTE


Bluetooth (optional) (only for model X4545)

The company declares that this device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. Complete declarations of conformity
are available under www.medion.com/conformity.

Battery Operation
Your appliance is powered by an integrated battery. In order to prolong the life and efficiency of your battery and ensure safe operation, follow the instructions below:


Batteries cannot withstand excessive heat. Take care to avoid overheating of appliance and the integrated battery. Failure to comply with this instruction may lead to
damage to or, even explosion of the battery.



Only use the car adapter to charge the battery.



The batteries are special category waste. When disposing of the appliance ensure that this is done correctly. Contact Customer Service for more details.

Maintenance
Warning
There are no user-serviceable parts which require cleaning inside the housing of the appliance.
You can prolong the life of the appliance by taking the following simple steps:



Always remove the power plug and all connecting cables before cleaning.



Clean the appliance only with a damp, lint-free cloth.



Do not use solvents, caustic or gaseous cleaners.

Safety and Maintenance

Care of the Display


Avoid scratching the display surface as this may be easily damaged. We recommend
using a display protection film (mylar) to prevent scratching of the screen. Please
contact your nearest dealer for this accessory.
The plastic on the display at delivery is purely for protection during transportation!



Ensure that no traces of water remain on the screen. Water can cause irreversible
discoloration.



Use only a soft, lint-free cloth to clean the screen.



Do not expose the screen to strong sunlight or ultraviolet radiation.

Recycling and Disposal
The device and its packaging are recyclable.

Device
At the end of its life, the appliance must not be disposed of in household rubbish. Consult
your local waste disposal company to enquire about environmentally-friendly options for
disposal.
Packaging
To avoid damage during transport, the appliance was supplied in protective packaging.
The majority of packaging is manufactured from materials which can be disposed of in an
environmentally friendly manner and be recycled professionally.

Safety and Maintenance

Transport
When transporting the appliance please follow the instructions below:



After transporting the appliance wait until the unit has acclimatised and adjust to
surrounding conditions (e.g. room temperature and humidity) prior to use. In the
event of large fluctuations in temperature or humidity, condensation or moisture
may form inside the appliance. This can cause an electrical short-circuit.



In order to protect the appliance from dirt, knocks and scratching, please use an
appropriate protective case.



Before travelling ensure that you are aware of the power and communications provisions at your destination. Before travelling obtain any power or communications
adapters that may be required for the operation of your device.



When shipping your appliance we recommend using the original packaging. If the
original packaging isn’t available please contact customer service for advice.



When passing through baggage control at airports, it is recommended that you
pass the appliance and all magnetic storage media (external hard drives) through
the X-ray system (the machine on which your bags are placed). Avoid the magnetic
detector (the structure through which you yourself pass) or the magnetic wand
(the hand device that the security staff use), since this may corrupt your data.

Safety and Maintenance

Supplied Items
Please check the condition of items supplied and check for missing items using the list
below. If you find your package to be incomplete, please forward to us all claims for missing items within 14 days from the date of purchase.
The package should include the following:


Navigation system



Power cable for cigarette lighter



TMC dipole antenna



Car holder and cradle



USB cable



CDs/DVDs with navigation software



Instruction manual and warranty card

Optional


Memory card



Earphones



Steering wheel remote



Protective case

Supplied Items

Views
Front Components






Ref

Component

 Microphone
 Battery Charge
Indicator

Description

The LED will flash orange during the charging
process. It will shine constant green when the
accumulator is fully charged.

 Bluetooth indicator This LED will blink at different speeds, according
to the connection status, if Bluetooth has been
activated (only for model X4545).

 Touch Screen

Displays the output of your appliance. Tap on
the screen with your finger, a stylus or a "blunt"
tip to select menu commands or enter data.

Views

Back Components
GPS
Antenna



Ref

Component

Description



Loudspeaker

Plays back music, language statements and
warnings.

Top Components




Ref

Component

Description



On-/ Off button Turn the device on or off by pressing and holding
the On/Off button. You will switch to the stand-by
mode or reactivate the device by quickly pressing
the button.



Fingerprint
sensor

See page 21

Views

Bottom Components






Ref

Component

Description



Memory card
insertion slot

Accepts an optional memory card for removable
storage.



Mini-USBConnector

Connection to external power supply as well as
connection for connecting to a PC by means of the
USB cable (for data matching)



Earphones

(see also holder with extension socket)
Connects to a pair of stereo earphones
Using this appliance at full
volume for extended periods
of time may cause damage to
the hearing capacity of the
listener.
You also have the possibility to connect a TMC
dipole antenna here.

Active holder
This holding tray offers extended possible connections and has an integrated TMC aerial
and a receiver for the optional steering wheel remote control in addition.
Proceed as described on Page 30 to connect your navigation system by means of the holding tray supplied with it.
Attention !
Please pay attention to the fact that the steering wheel remote will only be
available in the case that an electricity supply has been connected.

Views

Back components
stylus in
holder

integrated
TMC antenna

  
Ref Component

 Earphones

Description
Connects to a pair of stereo earphones
Using this appliance at full
volume for extended periods
of time may cause damage to
the hearing capacity of the
listener.

 TMC connector

You also have the possibility to connect a TMC dipole
antenna here.

 Mini-USB-

Connection to external power supply (no USB connection for data matching).

Connector

Note
A TMC aerial is integrated into your active holder, so that operation should
be guaranteed in conurbations and in strong transmission regions, even
without an additional projecting aerial. This will also depend on the area
and the vehicle.
The connection of an external projecting aerial is recommended to improve reception, if
no reception or only permanently insufficient reception is possible through the integrated
aerial.

Views

Initial Set up
The following is a step by step guide to assist in the initial Set-up of the navigation system.
Start by removing the protective plastic from the display.

I. Charging the Battery
The battery of your navigation system can be charged in the following ways:


Using the supplied car adapter or



using a suitable USB cable.
Attention!
It may be necessary to initially charge the battery for a considerable period
of time prior to commencing and running through the initial installation,
this is dependent on the level of charge held at the time by the internal
battery.

Please observe the following notes relating to the battery:



The charging status display LED will flash orange until the navigation system is
charged. If possible, do not interrupt the charging process until the
battery is fully charged. This may take a few hours. The charging status LED will
shine constant green if the battery has a high level of charge. Leave the device
charging for 20 further minutes, to ensure the battery is fully charged.



The navigation system can be used during the charging process, but the power
supply must not be interrupted during initial set-up.



Leave the external power supply connected to the navigation system for around 24
hours, so that the backup battery also charges-up fully.



The external power supply can remain connected; this is recommended for continuous operation. However, the mains adapter (optional) must remain switched on
whenever it is connected to the navigation system.



Even after a power source has been connected to the device it may take several minutes until the device is once again ready to operate again, this occurs if the charging state of the battery is exceptionally low. The battery will continue to be charged
if the power supply is connected and the device is switched off.



The battery will be charged, even if the device is switched off completely.

Initial Set up

II. Power Supply
Car Adapter





(similar picture)

Alternative possibility of charging the battery
The battery will charge as soon as you connect your navigation device to a switched-on PC
or notebook by means of a USB cable. No additional software or updates is required for
your PC to perform this function. Do not interrupt the charging process if possible during
the initial charge.
Note
The brightness will be adjusted downwards, if necessary, if a USB connection is being set up when the device is switched on.
It is recommended to set the device to the stand-by mode, in order to
shorten the charging time by USB.

Initial Set up

III. Switching on the Device
You will switch your navigation device on or off again completely by pressing the On/Off
key for a long time (> 3 sec.).
The navigation system will start the first setting up automatically. Select the language that
you require first. The brand logo will appear and your device will display the entry screen
after a few seconds.

Initial Set up

Button

Description

Main Screen

Viewing maps
Navigation menu

Extras

Settings

Note
You will not be able to select the Navigation menu or the settings if the
navigation software does not find any map files in the device or on a
memory device. Then the ‘Extras’ menu will appear automatically.

Initial Set up

Note
Brief pressure on the on/off button will be enough to switch the device
on or off, provided that your navigation system is connected to an external
source of electricity or is running in battery operation (standby mode).
You can adjust the period of operation to suit your needs using the
Settings button on the main screen of your device. Your device is delivered in a status in which it will not switch off independently.
Press and hold the On/Off key (> 3 sec.), to completely switch off the
device.
No data will be lost as data is stored in the internal memory. The starting
process will only last slightly longer.
Your navigation system will use a low amount of electricity and the batteries will be discharged, even when in standby mode.

IV. Installing the Navigation Software
The final installation of the navigation software will take place automatically from the internal memory, during the initial set up, if your device has already been equipped with the
basic data of the navigation software at the factory. Follow the instructions on the screen.
An optional memory card must always be inserted in the device while the navigation system is being used.
It will be necessary to carry out a Reset to restart the navigation system if the memory card
has been removed (see page 25).
Please also read the chapter Navigation starting on page 27.

Initial Set up

General Operating Instructions
Switching on/off the device
Your device will be in its normal operating state after the initial set up. You can activate
and deactivate your device with the On-/Off switch.
1. To start your navigation system press briefly the On-/Off switch.
Note
Your device is delivered in a status in which it will not switch off independently. You can adjust the period of operation to suit your needs using the
Settings button on the main screen of your device.
Your navigation system will use a low amount of electricity and the batteries will be discharged, even when it is in the standby mode.
2. To switch off your navigation system briefly press the On-/Off switch .
The following screen will appear:

You have three possible choices:
Button Description
Cancel/Back
Return to previous view with this key, if you have accidently called
up this screen.
Standby Mode (Energy saving mode)
The device will go into Standby Mode if this key is clicked.
Reset
You can carry out a reset by clicking this key.
The device will go into the Standby mode automatically after a few seconds if you do not
want to select any of these three possibilities.
For further settings within the Standby mode also see the chapter on “Special CleanUp
Function”, page 69, point 8.

General Operating Instructions

This display will also appear after the delay period of a few seconds has expired, if you
have activated the DC AutoSuspend Comfort Function.

Security
You have the possibility of protecting your device against external access by means of this
function. Some one-off settings will have to be made before you will be able to use this
function. Proceed as follows to do this:

Storing the password and the information note
1. Go to Settings and then to Device settings by means of the main display.
2. Click on Security, in order to start the respective function. The following display
will appear:

3. Click on

, in order to enter a password.

4. A keyboard will appear. Enter a password with it.
Note
The password must consist of at least 4 symbols. Use a combination of
letters (A – Z) and numbers (0 - 9). Keep the password in a safe place.

5. Confirm the password with the

symbol after you have entered it.

6. Enter the password in the second field to reconfirm it and in order to avoid potential careless mistakes.
Note
The password will be displayed in the form of small stars (****).
7. An additional text field will appear after you have entered the password. Enter an
information note here that will serve as a support for remembering your password.
You will be able to call up this information if you have forgotten or mislaid the
password.
18

Security

Making settings
The following selection window, through which you will make the settings for the Security
Function, will appear after you have entered the password and the information note
successfully.

Button

Description
Set here whether the device should request the password
after a hard reset.
Set here whether the device should request the password
after a restart.
Set here whether the device should request the password
after the device has been switched on from the Standby
mode.

Confirm your settings with

during the set-up. The following screen will appear:

Security

SuperPIN and UUID
The SuperPIN and the UUID (Universally Unique IDentifier = definite device identification)
will appear on the display after you have confirmed the settings.

Note
Record this data in your Operating Instructions (see Page 1) and keep
them in a safe place.
You will need this information if you have entered the password incorrectly 3 times. The navigation device can then only be released with this
information.

Security

Fingerprint Sensor (optional)
Your new navigation system is equipped with a fingerprint sensor.

Benefits of this technology
First of all, it provides extra comfort. You will not have to memorize passwords, because
the software manages those for you.
Note
Store your passwords and access data in a safe place. If you cannot identify
yourself by your fingerprint (e.g., when working on someone else's computer), you can log in with your access data in the usual way.

Storing a fingerprint
1.

Go to the
sub-menu and select the
point there, to store your fingerprint.

You will be requested to stroke your finger slowly across the sensor several times:

Security

The following screen will appear if the scanning process of the fingerprint has
been successful:

Repeat this process until the fingerprint has been scanned in successfully several
times.

You will be requested whether you want to store the fingerprint that has been
scanned in the following screen:

Confirm with

Now, you will be able to log into your device with the stored fingerprint.

Security

Making subsequent settings
Start the Security Function if you have already entered a password or stored a fingerprint
and would like to make a subsequent setting or to change the password. The following
display will appear:

Button

Description
Change the password or the information text;
Store /change a fingerprint
Authentication settings(see Page 19, Making settings)
Display SuperPIN and UUID (see Page 20)
Reverses the complete security function. All security settings and passwords will have been deleted after this function has been carried out. You will have to enter and confirm your password again to be able to carry out the security function.

Security

Password Request
A password request will appear at the restarting of the device, according to the setting, if
you have established a password by means of the Security Function.

1. Enter the password stored by you by means of the keyboard or draw the finger
(fingerprint) previously chosen by you across the sensor. The symbol
you if you have stored a fingerprint.

shows

Note
The password will be displayed in the form of small stars (****).
2. Click on the question symbol to have the information note displayed, if you have
forgotten the password and need the Help setting.
3. Click on

to confirm the entry.

Note
You will have to enter the SuperPIN if you have entered the password
incorrectly 3 times. Contact your Service Center, giving the UUID, if you
have also mislaid it. The UUID will be faded out in the lower display.

Security

Resetting the Navigation System
You can reset your navigation system if it is no longer reacting or working properly.
This option restarts the navigation system, without reinstallation being necessary. A reset is
often used in order to reorganise the memory. In doing so all programs that are running
are interrupted and the working memory is reinitialised.
You can carry out two different Reset procedures with your device.

Reset
The following screen will appear if you press the On/Off switch for a short time:

If you want to carry out a Reset, tap on

You will find further information in the chapter “Switching on/off the device”, page 17.

Resetting the Navigation System

Switching the Device off Completely / Hard Reset
Attention!
A hard reset will delete all data in the temporary memory.
Your navigation system will normally be in the Standby Mode, if you have switched it off
by pressing the on/off button briefly. In addition, the system can be switched off completely; the consumption of energy can be kept as low as possible through this. All the
data in the temporary memory will be lost if the device is switched off completely (hard reset).
To switch your navigation system off completely:
1. Press and hold the On/Off key (> 3 sec.), to switch off the device.
2. Press and hold the On/Off key (> 3 sec.), to switch the device on again.
A reinstallation will not be necessary after a hard reset if your device has already been
equipped with the basic data of the navigation software in the permanent memory.

Resetting the Navigation System

Navigation
Safety Instructions for Navigation
The bundled product CD/DVD contains a comprehensive instruction manual.

General Instructions


Do not adjust or configure the navigation system whilst driving, this is to protect
yourself and others from accidents!



In the event that you do not understand the voice instruction or if you are in any
doubt about what to do at the next intersection, then the map or arrow displayed
on the screen will provide you with a quick orientation. Only look at the display
when it is safe to do so and driving conditions allow!
Legal remark
The use of devices that warn for traffic monitoring systems (like „speed
traps”) is prohibited in some countries, like Germany, Ireland and Switzerland. Please obtain information about the legal situation and apply the
waning function only where allowed. We cannot be held liable for damages caused by the use of the warning function.
Attention!
The road layout and driving rules take precedence over the instructions of
the navigation system. Only follow the instructions when circumstances
and driving rules permit it! The navigation system will guide you to your
destination even when you have to deviate from your planned route.



The direction statements of the navigation system given do not release the driver
of the vehicle from his or her duty of care or personal responsibility.



Plan routes before you leave. If you want to plan a new route whilst on the road
pull over and stop driving.



In order to receive the GPS signal correctly, keep away from metal objects as they
may hinder reception. Attach the navigation system onto the inside of the windscreen or near the windscreen with the suction cup. Try out different positions in
your vehicle in order to find the best reception.

Navigation

Notes for Use in a Vehicle


Take care that the holder does not present any risk to safety, even in the case of an
accident, when installing it.



Take care that the cable does not impede any safety components.



The display of your navigation system may show “light reflections”. Please take
care of not being “blinded” during operation.



Do not mount the components within the operating range of any airbags.



Check the secure adherence of the suction cup at regular intervals.



The power plug will consume power, even if no device is connected. Remove it
when not in use to avoid draining the car battery.



Check all safety equipment in your car after installation.
Note
Do not leave your navigation software in the vehicle when you leave it
unattended. You should also uninstall the holder for security reasons.

Navigation

Aerial Orientation
The aerial must have unrestricted access to the sky to receive GPS satellite signals. Place the
aerial as horizontally as possible for this reason. Try out aerial and installation possibilities
in the vehicle if the reception is inadequate.

I. Mounting the Car Holder
Attention!
Only fix the holder for the navigation system to the windscreen, if it does
not impede the view.

Snap-in lever

(similar picture)

Note
Your navigation device can also be equipped with a different but similar
vehicle attachment as an alternative, according to the version.

Note
Clean the windscreen thoroughly with a glass cleaner. Warm the disk and
the nipple slightly at temperatures below 15° C.

Navigation

Place the holder with the suction head directly onto the wind screen and press the lever on
the suction head downwards. The sucker will attach itself to the background firmly.

II. Attaching the Navigation System
You will find a detailed illustration of the holding tray on Pages 10 and 11. Proceed as
follows to attach your navigation system by means of this holding tray:
1. Connect the car adapter (see page 13) and, if necessary, the TMC aerial to your
navigation system and insert the memory card.
2. Push the device straight from above to below in the holder as shown in image .
Note
The device must be pushed straight into the holder under all circumstances. Avoid any tilting. Do not push the device into the holder with
force.



(similar picture)

3. You will see the insertion of the device in images  and .
4. Place the holder on the fixing catches of the car holder.
5. Now, push the unit to the bottom until it engages audibly.
6. Now you will be able to place the complete unit on the cleaned windscreen or the
suction plate.

Navigation

III. Connecting the Car Adapter






(similar picture)

1. Plug the jack () of the connection cable into the corresponding receptor at the
rear of the active holder.
2. Insert the power adapter () into the cigar lighter socket ensuring, that it will
not lose contact while driving. This could cause a malfunction.
Note
Remove the power adapter from the cigarette lighter socket when ending a trip or when parking the car for a extended period of time. Otherwise the car battery could be drained. In this case use the power switch
to turn off the navigation system.

Navigation

IV. Starting the Navigation Software
Note
Your memory card will always have to be inserted into the device during
the use of the navigation system, if the card contains (additional) mapping
material.
It will be necessary to carry out a reset to restart the navigation system if
the memory card has been removed while the system was being used (see
page 25). According to the navigation system the reset is carried out
automatically.
1. Switch on your navigation system.
2. The Navigation software will start automatically or after tapping on the navigation control button on the main screen, according to the version.
3. Tap on Navigation on the screen for entering the destination. Enter the destination address. Confirm your entry by clicking the
symbol to start the navigation. After a short time, if the satellite reception is adequate you will receive
augmented language statements.
Further information regarding the navigation software can be found in the comprehensive manual on your navigation CD/DVD. This is a pdf-file you can read and print with
Acrobat Reader.
Note
The GPS-receiver will require some minutes for initialisation when deployed for the first time. Even when GPS signal reception is indicated the
navigation could be imprecise. In all future instances it will take about 3060 seconds until a correct GPS-signal is available, sufficient “sight” of the
satellite is a prerequisite.

Navigation

Warning function for traffic monitoring points
The following display will appear if the warning function for traffic monitoring points
(optional) has been installed:

Confirm with
, if you want to use navigation with the warning function for traffic
monitoring points.
Tap on the Configure special functions interface in the Settings Menu, in order to configure the warning function.

The following screen appears. Tap on POI-Warner:

Navigation

Tap on Speed cam (stationary) here, in order to make the settings for the ‘radar fixes’:

Here, you have the option of having the traffic monitoring points represented on a map or
faded out. You can also set whether you would like to be informed by acoustic signals
before reaching a traffic monitoring point.

Acoustic information about a traffic monitoring point will be given by a warning sound
approx. 15 seconds before it is reached. Then, another double warning sound will be
given approx. 7 seconds before it is reached. Four warning sounds will give information
that the speed is too high. In addition, the distance to a monitoring point will be indicated
by a bar indicating closeness (left lower edge of the display).
Sample view if map presentation has been activated:

Navigation

Note
Please pay attention to the fact that traffic monitoring points are not preset
in all countries.
* Legal remark
The use of devices that warn about traffic monitoring systems (like “speed
traps”) is prohibited in some countries, i. e. Germany, Ireland and Switzerland. Please obtain information about the legal situation and apply the
warning function only where allowed. We cannot be held liable for damages caused by the warning function.

Navigation

Speech commands (optional)
The Speech Entry mode can be activated by means of the function during navigation. A
short information sound will indicate that the navigation system is ready for the speech
entry.
Explanation of the symbol:


( ) optional words;



[ ] Fillers



„|“Alternatives;



< > Content displayed can be spoken

The following commands will be possible here according to the current view:
Range of validity

Command

Always applicable

abort | cancel | stop
back | go back | reverse
help

Speech commands (optional)

List commands

next page | scroll down
previous page | scroll up

Main menu
Advanced mode

Main menu
Simple mode

Destination entry
Advanced mode
Town entry
Destination entry
Advanced mode
(Change to post code
entry) post code entry

Speech commands (optional)

Destination entry
Advanced mode
(Change to town entry)
Street entry
(If the town has been
entered)
Destination entry
Advanced mode
(Change to town entry)
Street entry
(If the post code has been
entered)

Destination entry
Advanced mode
House number entry

Destination entry
Advanced mode
Multiple routes

Speech commands (optional)

Destination entry
Simple mode
Town entry
(Change to post code
entry) post code entry

Destination entry
Simple mode
(Change to town entry)
Street entry

Destination entry
Beginner mode
Street entry
(If the town has been
entered)

Destination entry
Simple mode
Street entry
(If the post code has been
entered)

Speech commands (optional)

Destination entry
Simple mode
House number entry

Route information/
Overview map
(not in the beginner
mode)

directions
[show] destination information | [go to] information
about destination | Destination information
[Go to] route information | Route information
current position
destination [area]

Volume settings

Map
Advanced mode

Speech commands (optional)

Note
Speak the commands loudly and clearly in the direction of the navigation
system. No incidental noises (radio, ventilation or loud conversation)
should arise during the speech entry.

Speech commands (optional)

Handsfree Facility by means of Bluetooth (optional)
The Bluetooth technology serves to bridge short distances wirelessly. Bluetooth devices
transmit data wirelessly, so that other devices that also support this technology can communicate with each other without cables.
Both devices will have to be adjusted to each other (pairing), before you will be able to use
your navigation system as handsfree equipment with your Bluetooth mobile phone.
Note
Please read how you switch on the Bluetooth function in the Operating
Instructions of your mobile phone.

Starting the Bluetooth Application
Tap on Bluetooth Dialer.
Note
The function for active use will have to be reactivated first if Bluetooth has
been deactivated manually.
1. Now the main Bluetooth screen will appear on your navigation device.

Handsfree Facility by means of Bluetooth (optional)

Overview of the Main Screen

Button Name

Description

Course of
call

Displays the course of calls put through and received.

News

View the postbox of your mobile phone through this
symbol. You will be able to receive, write and send
messages.

Telephone Call the contacts stored in the mobile phone through
Book
this symbol. The support of this function depends on
the respective mobile.
Back

Previous Page of the main display.

Delete

Delete the number entered by means of the keyboard
with this field.

Calling

Select the number entered by means of the keyboard
with this field.

Keypad

Enter the digits of the telephone number to be called
by means of the keyboard.

Volume

Set the volume of the microphone and the loudspeaker by means of this symbol.

Settings of
the handsfree facility

New message – Options for displaying new
messages
Pairing – Link the navigation device to the mobile
Settings for automatic synchronization between
the navigation device and the mobile phone
Bluetooth – Activate or deactivate the Bluetooth
function

Handsfree Facility by means of Bluetooth (optional)

Synchronous telephone book – Settings for the
automatic synchronisation between the navigation device and a mobile phone telephone
Setting of the basic volume of the microphone
and the loudspeaker.

Pairing the Navigation Device and the Mobile Phone
1. Activate the Bluetooth function on your mobile phone.
Note
Each mobile phone uses different paths to do this. Read the instructions of
your mobile phone under all circumstances for this reason.
2. Select the
option (Pairing – link the navigation device to the mobile phone) under the settings of the open speech facility of your navigation device. The search for
a Bluetooth-enabled device will start.
3. Select the corresponding mobile phone from the list.
Start the link by operating the Pair field.
4. Your mobile phone will recognize the navigation device. You will be requested to
enter a 4-digit PIN code. This is 1 2 3 4 for your navigation device.
5. Your mobile phone will be recognized and the open speech facility through the
navigation system will now be available to you.
Note
This procedure will have to be repeated as soon as you have switched off
the navigation system or a spatial separation between your mobile phone
and the navigation device arises.

Handsfree Facility by means of Bluetooth (optional)

Accepting incoming calls

Button

Description

Accept calls

Reject/terminate calls

Making Calls
1. Tap on the keypad in the main Bluetooth screen and enter the number that you
wish to call.
2. Start the call with

Handsfree Facility by means of Bluetooth (optional)

During a Call

Button

Description
End call

Volume settings for microphone and loudspeaker

Return the conversation to your mobile

Handsfree Facility by means of Bluetooth (optional)

MP3 Player (optional)
Depending on the software equipment your navigation system is equipped with a
MP3- Player. Start the MP3 player from the menu Extras by tapping the ‘MP3 Player’
switch area. All the MP3 files located on a memory card can be taken into a List of Favourites and will be available for replay. (The memory card must not be write-protected in this
case.)

Overview of the Main Screen

Button

Description
Reduces the screen brightness to a minimum, to save electricity.
Determine/add bookmarks.
Increase or decrease the volume.

The display in the upper right corner of the screen will show the
current level of the volume.
Break off action / back to the previous menu

Move to the previous or next file. It will be possible to skip
backwards or forwards within the title playing while it is being
played.
Play the playback.
Stop the playback.
Opens the List of Favourites.

MP3 Player (optional)

Displays the files stored on the flash disk and/or on the memory
card.
You will make the settings of the MP3 player here.

Select a Title and Move it into the List of Favourites
Tap on
and select the title that you would like to move into the List of Favourites, in
order to select a title.

will have three possibilities of marking the title here:


Tap on

in order to mark all the titles, including all sub-directories.



Tap on

in order to mark all titles currently in view.



Tap on

to delete all marks within a directory.

The selected titles will be indicated by a

, in order to confirm your selection. The titles marked will not be moved into
Tap on
the List of Favourites until then.
Tap the file required and select the requisite title, in order to select a title in the subdirectories.
The

symbol will be shown if not all the titles in a directory have not been selected.

MP3 Player (optional)

List of Favourites
You will reach the List of Favourites by tapping on the

You will delete all titles with

You will delete individual titles with
Confirm with

, in order to take over the new selection into the List of Favourites.

List of the established bookmarks
You will reach the list of the established bookmarks by clicking on the

You will delete all bookmarks with the

symbol.

You will delete an individual bookmark with the
Operation with the

symbol :

symbol.

symbol to take over a new selection into the list of bookmarks.

MP3 Player (optional)

Picture Viewer (optional)
Depending on the software equipment your navigation system is equipped with a
Picture Viewer.
You can view the jpg format images on your memory card on your navigation system,
with the Picture Viewer. All the images on the memory card will be available immediately.

Operating the Picture Viewer
Start the Picture Viewer from the menu Extras / Other Applications by tapping on the
Picture Viewer button. Alternatively, the Picture Viewer can also be started from the navigation software itself.

Main Screen

Fig.: Miniature view

Move the miniature view to the left or to the right with the arrow keys. Tap on a specific
images to display it in the Full Image Mode.
Return to the start in miniature view by tapping on
You can end the application by tapping on the
Start the slide show by tapping the

.
symbol.

symbol.

Picture Viewer (optional)

Full Image View

Fig.: Full image view without service strip

Tap in the lower area of the screen in the full image view, in order to activate the service
strip:

Fig.: Full image view with service strip

Button

Description
Previous picture
Turn it clockwise by 90°
in stages
Fade in grid
Start the slide show
Pause the slide show
Turn it counter-clockwise by 90° in stages
Next picture

Picture Viewer (optional)

You will return to the miniature view by tapping in the centre of the image.
The image displayed will be subdivided into 6 fields by tapping on the
in grid).

Fig.: Full image mode with grid

Tap on a square in the grid to zoom in on that area of the picture:

Fig.: Zoom-in Mode

Tap on the centre of the image to go back to viewing the full picture.

Picture Viewer (optional)

symbol (fade

Travel Guide (optional)
Depending on the software equipment your navigation system is equipped with a Travel
Guide. The Travel Guide will supply general information about the different areas of individual towns and cities or regions in Europe, such as sights, restaurants, culture and travel
information. Start the Travel Guide from the menu Extras by tapping on the Travel Guide
button.

Overwiev of the Main Screen

Select initially the Country through the Place and then Category, if you want to find any
information. Then select the category, for example. You will be able to filter the search
results by entering a Price class and/or an Assessment, if required.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Travel Guide (optional)

Fig. 5

Fig. 6

Fig. 7

Confirm with
, if you want to navigate to the destination displayed. The address will then be available to the navigation software as the destination.
Button

Description
Previous image
Shows the address of the selected category
Shows the available images in the selected category.
Tap on this control button to navigate directly to the selected
address.

Note
The possible selections within the Travel Guide can vary according to the
software available.

Travel Guide (optional)

Alarm Clock (waking function) (optional)
Depending on the software equipment your navigation system is equipped with a
Alarm Clock/waking function.
Start this function from the menu Extras / Other Applications by tapping on the Alarm
Clock button.
The waking function can work when the device is switched off (Standby Mode / Power
Saving Mode) as well as a reminder during the current navigation.

Overview of the main screen

This view will appear if you have not yet set up a waking time. Enter an alarm time in the
24-hour format and confirm your entry with

Alarm Clock (waking function) (optional)

Description of the Interfaces
Button

Description
Current system time
Setting-up mode (Setting volumes, system time and
alarm)
Night mode (Standby mode)
Reset/deactivate the waking function
Setting the alarm time
Delete the entry
Confirmation interface
Increase the volume / Reduce the volume
Back to the previous menu
Close the application

Alarm Clock (waking function) (optional)

Setting the System Time
The display of the current time will be located in the upper right corner of the screen. You
can adjust it as follows:
1. Tap on

2. Tap on

in the main screen. The following screen will appear:

to change the time setting:

Note
The system time is updated by GPS reception. Pay attention to the time
zone settings.

Alarm Clock (waking function) (optional)

Selecting an Alarm Signal
1. To select an alarm signal touch the

symbol.

2. Select the desired alarm sound and confirm the selection with

3. Tap on the corresponding file in the Memory Card directory if you would like to select an alarm tone from the storage card and confirm again with

4. Select the desired alarm sound and confirm with

5. The selected alarm signal is marked by a
6. Close the application with

Alarm Clock (waking function) (optional)

Setting the Volume
You can adjust the volume of the alarm signal by tapping on the

interface.

Note
The volume configured here only relates to the alarm signal and will not
change the volume of the language output of the navigation system or
other functions of the system.

Alarm Clock (waking function) (optional)

Snooze Function
You will have the possibility of making the waking signal repeat at regular intervals by
means of the Snooze function, once it has sounded at the alarm time set.
3. Tap on

to activate the Snooze function.
Current
system time
Waking time set

4. To be wakened again at the same time on the following day tap on the
5. Tap on

to return to the screen before the alarm signal started.

Ending the Alarm Clock Application
1. Tap on

to deactivate the alarm time set.

2. You will find yourself in the Setting-up mode.
3. Tap on

in order to leave the application. An alarm time is not set.

Alarm Clock (waking function) (optional)

button.

Contact Manager (optional)
Depending on the software equipment your navigation system is equipped with a Contact Manager. You will be able to create the contacts database (from Outlook) or administrate your contacts with the Contact Manager.

Create the contacts database
The Contact Manager will search for the contact database in the internal device memory
(under ‘My Flash Disc’), in order to store your contacts. The contacts.db file must be
present in the contacts sub-directory for this purpose:


\My Flash Disk\settings\0\contacts\contacts.db

The more recent contact database will be used, if one is found in My Flash Disk.
You will be able to export contacts from Microsoft Outlook with the Medion GoPal Assistant. Proceed as follows to do this:
1. Connect your navigation system tot he computer.
2. Select the destination for the synchronisation (internal memory of the device) in
Gopal Assistant.
3. Select Synchronize.
4. Select Export Outlook contacts.
5. Confirm your choice with Synchronize.
6. The contacts database will be transferred to your navigation system.

The following screen will appear, if no database has been found:

Contact Manager (optional)

Confirm the storage of a new contact database with

Operating the Contact Manager
Start the Contact Manager from the menu Extras / Other Applications by tapping on the
Contact Manager button.

Overview of the Main Screen

Storing and Processing Contacts
Select
in the main screen and follow the instructions on the screen, in order to
store a new contact:

Fig. 1

Fig. 2

Contact Manager (optional)

Fig. 3

Fig. 4

Tap on
and select the required image from the memory card, to allocate an image to the contact:

Fig. 5

Fig. 6

Fig. 7

Contact Manager (optional)

Sudoku (optional)
Depending on the software equipment your navigation system is equipped with the game
Sudoku.
Start the game from the menu Extras / Other Applications by tapping on the Sudoku
switch field.
Sudoku is a number puzzle. The puzzle area is square and subdivided into nine sections.
Each section consists of 9 smaller squares.
When playing Sudoku, the aim is to fill all the 81 number fields using the numbers 1-9.
Each number must only appear once in each section at the same time. Each number must
only appear once in each row and column.
Some number fields will already have been populated prior to the start of the game.

Main Screen

Sudoku (optional)

Description of the switch fields
Button

Description
Start the game

You will receive notes about a solution by tapping on
this control button. Tap on the control button again to
hide the notes about a solution.
You will receive the solutions of the number fields by
tapping on this control button. Tap on the control
button again to hide the solutions.
A new Sudoku will be opened by tapping on this control button.
Settings
You have the following possibilities in the Settings
menu:
The current game will be
stored by tapping on this
control button.
You will load a game
that you have started
onto the screen by tapping on this control
button.
Delete a stored game
status.
You can set the level of
difficulty here.
Back to the current
game.

Sudoku (optional)

Overview of the game field

Description of the control buttons
Button

Description
Strip of numbers to be entered
Strip for the selection of the numbers to be entered in
the number fields. The selected number will stand out
and it will now be possible to enter it into a number
field.
Entry mode
First, tap on the number in the strip of numbers to be
entered that should appear in particular number field
and then on the corresponding number field.
Deletion mode
Tap on the number to be deleted.
Leave the application by means of this.

Sudoku (optional)

FAQ
Where can I find more information on the navigation
system?
Detailed operating instructions for navigation can be found on the
corresponding CD/DVD, which accompany your navigation system.
Also use the additional Help functions that are available with a single
touch of a button (usually F1 on the PC), or by selecting the Help
option, as additional assistance. These aids will be provided to you
while you are using the computer or the device.
What do I need the accompanied CD/DVD for?
The CD/DVD contains:


®
the ActiveSync program for balancing data between the navigation system and the PC.



Additional programs (optional).



This User manual in digital form.



digital maps



PC-application for rapidly resetting the data material



Manual of the navigation software

The navigation system is no longer responding. What should I do?
Carry out a reset (see page 25).
How can I adjust the lighting?
Under Settings.

FAQ

Customer Service
Faults and Possible Causes
The navigation system no longer reacts or is behaving atypically.


Carry out a reset (see page 25).

The navigation system is recognised only as a guest by ActiveSync®.


See information on page 73.

The GPS receiver cannot be initialised or found.
If a GPS signal continues not to be reported on the screen, in spite of the correct installation of the system, this can be caused by the following factors:


Sufficient satellite reception is not possible.
Solution:
Change the position of your navigation system and ensure that unrestricted
“sight” of the aerial is not impaired.

No language statements can be heard.


Check the volume setting.

Additional Support
If the suggestions in the above section have not solved your problem, please contact our
customer service hotline. However, before you contact your customer service hotline,
please have the following information available:



How is your navigation unit configured?



What additional peripherals do you use?



What messages, if any, appear on your screen?



What software were you using when the error occurred?



What steps have you already undertaken to solve the problem?



If you have been given a customer number previously, please give this number to
the technician.

Customer Service

Appendix
Special CleanUp Function
The CleanUp function serves the targeted deletion of data, without using a PC.
Note
Please use this function very carefully, because it is possible for data to be
deleted that can only be entered again manually afterwards.
The CleanUp function is activated when the ‘o’ is pressed in the Gopal lettering of the
Main Menu, immediately after the start tone following a reset.
The CleanUp function offers different options:

1. Remove Installation Only
Removes the software installed from the ‘My Flash Disk’
memory [= part of the permanent memory in which the executable parts of the navigation
software will be located following the initial alignment (\My Flash Disk\Navigation)].
2. Remove MAP Only
Removes the digital maps from the ‘My Flash Disk’ memory (\My Flash
Disk\MapRegions).
3. Remove Preload Only
Removes the data needed for the installation of the navigation software from the permanent memory (\My Flash Disk\Install).
4. Remove All
Deletes the whole contents of the ‘My Flash Disk’ memory. It will not be necessary to
recalibrate the screen after this function has been carried out.
5. Factoryreset
Sets the device back to the delivery status in the case of an intact main installation.

Appendix

6. Format Flash
Formats the internal ‘My Flash Disk’ memory. This formatting can be necessary in the case
of a prolonged removal of errors. It will be necessary to recalibrate the screen after the
formatting function has been carried out. All data will be deleted from the internal ‘My
Flash Disk’ memory irrevocably.
7. GPS Factory Reset
Performs a factory reset of the GPS receiver. When using the GPS function after having
performed a factory reset, the GPS receiver must orientate itself again. This process may
take a while.
8. DC AutoSuspend/Wakeup
You can select here when your navigation system should go into Standby mode automatically after the withdrawal of the external power supply. For example, this function is useful
in the case of vehicles where the cigarette lighter also switches off when the ignition is
switched off.
The AutoSuspend function will be activated several seconds after the discontinuation of
the external power supply and the Standby display will appear for the time set (see
Page 17).
The DC AutoSuspend function will be deactivated again if the power has been reconnected within the total period (in the case that the engine has been switched off for a short
time, for example). Otherwise, the navigation system will go into the Standby mode after
the expiry of the time set.
Set the required time by clicking on it and confirm your selection with OK.

Note
This function is deactivated and can be set individually in the status at
delivery and after a hard reset (see Page 25)

Appendix

9. DRControl
Here you can switch on/off the Dead Reckoning (see page 76).

Exit
Leaving the CleanUp function and restarting the device (like reset).
Note
The deletion of the data must be confirmed before the action actually takes
place. To do this, press on YES. There will be a corresponding report if the
data to be deleted is no longer available.
Please read the “Transferring Installation Files and Map Material to the
Internal Memory“ chapter on Page 85, in order to recreate the files (installation files and map material) in the internal memory.

Appendix

Synchronisation with the PC
I. Installing Microsoft® ActiveSync®
In order to transfer data between your PC and your navigation system you need the Microsoft® ActiveSync® program.
The cost of the navigation system includes a license for this program which can be found
on the CD/DVD.
Hinweis
You will not need the ActiveSync® communications software, if you are a
user of the Windows Vista® / Windows® 7 operating system. The system
files necessary for the simple data transfer are already integrated into your
operating system.
Attention!
Important files can be overwritten or changed during the installation of
software. You should create a hard disk backup, in order to be able to have
access to the original files in the case of possible problems following the
installation.
You must have administrator rights to install the software under Windows® 2000 or XP.
Important
You should not connect the navigation system to your computer yet.
1. Insert the CD/DVD and wait until the program starts automatically.
Note
If it does not function, the Auto Run function is probably deactivated. The
Setup program on the CD/DVD must be started, to start installation
manually.
2. Choose the language, click then Install ActiveSync® and follow the instructions on
the screen.
Note
When installing the GoPal Assistant, ActiveSync® will be installed automatically.

Synchronisation with the PC

II. Connecting with the PC
1. Press the On/Off button to start your navigation system.
2. Connect the USB cable to your navigation system.
3. Push the USB connector into a free USB port on your computer.
4. The following screen will appear after the navigation system has been connected:

ActiveSync
mode

Mass storage mode

Note
The ActivSync® mode will be loaded automatically after a few seconds, if
no mode has been selected.

5. Select the desired mode:

Mass Storage mode
You will be able to use your navigation device as a detachable device (e.g. a USB stick) in
the Mass Storage mode. Two drives, the internal memory of the navigation system itself
and the (optional) memory card, if it has been inserted into the device, will be connected
to do this.
Note
No further entries can be made on the device at the same time if you are in
this mode. Use the ‘Remove hardware safely’ function of your operating
system to protect yourself against data loss. Now, remove the cable from
your navigation system.
The Hardware Installation Assistant will now recognize a new device and will install a suitable driver. This can take several minutes.

Synchronisation with the PC

ActiveSync®-Mode
Repeat the attempt to connect, if it has failed the first time, if you have selected the ActiveSync® mode.
Follow the instructions on your screen. The program will now set up a partnership between your PC and navigation system.
Note
The navigation system must have been recognized when setting up the
ActiveSync® mode, in order to be able to work with the GoPal Assistant.

Alternative possibility of charging the battery
The battery will charge as soon as you connect your navigation device to a switched-on PC
or notebook by means of a USB cable (optional). No type of software or driver installation
will be necessary for this. Do not interrupt the charging process if possible during the
initial charge.

III. Working with Microsoft® ActiveSync®
ActiveSync® will be started automatically if you connect your navigation system to the PC.
The program will check whether the device is one with which a partnership has been entered. If this is the case, the changes that have taken place on the PC and on the navigation
system since the last synchronisation will be compared and adjusted to each other. You
will be able to define exactly which data will have priority during the synchronisation in
®
the settings of the ActiveSync Program. Call up the Help of the Program (with the F1 Button), in order to become familiar with the effects of the respective settings. A restricted
Guest Access, with which you will be able to exchange data, for example, will become
active automatically if the navigation system has not been recognised as a partner. If this is
the case, although the process concerns the registered partner device, separate your navigation system from the PC and switch it off and on again. Now connect your navigation
system to the PC, to restart the recognition process. Repeat the process and, restart your
PC in addition, if your device continues to be recognised as a guest.
Note
Make sure that you always connect your navigation system to your PC
with the same USB connection, otherwise your PC will allocate an
additional ID and reinstall the device.

Synchronisation with the PC

GPS (Global Positioning System)
GPS is a satellite-backed system for determining your position. With the help of 24 satellites revolving around the earth, it is possible to determine your position on earth with the
accuracy of a few meters. The satellite signals are received by the antenna of the built-in
GPS receiver, which must have a "line of sight" to at least 4 of these.
Note
When the line of sight is interrupted (e.g. in tunnels, between houses, in
woods or also in vehicles with metal-coated windows) it is not possible to
determine the position. The satellite reception however automatically picks
up again as soon as the obstacle has been passed and the line of sight is reestablished. Moving slowly (e.g. slow walking) also limits the accuracy of
the navigation.
The GPS receiver consumes additional power. This is especially of concern when running
on batteries. To conserve power do not turn on the GPS receiver unnecessarily. Also terminate the navigation software if it is not needed or satellite reception is not possible for a
longer period. You can also switch the device off by means of the On/Off switch if you
experience a short interruption in your journey, pressing the same switch again will reactivate a restart. The GPS receiver will also be reactivated at the same time, if the navigation
software is still active. There may be a delay for the position to be updated again, this is
dependent on the reception situation.
Note
Please note that your appliance is preset to not shut down automatically
after a few minutes without activity. You can change this preset in the
Settings mode. If the GPS receiver has not been active for some hours, it
must orientate itself again. This process may take a while.

GPS (Global Positioning System)

Dead Reckoning (gyroscope)
The current position can be established momentarily, for driving through a tunnel, for
example, with the aid of this function, even without a valid GPS signal.
The navigation system will receive the necessary information during the absence of the
GPS signal for a short time, to continue to establish the position through an installed magnetic field and acceleration sensor.
The methods for establishing the position by means of the sensor described represents
merely one device, so that deviations can arise. Sufficient GPS reception must be available
before the transfer to establishment of the position by means of dead reckoning because of
the system.
Dead reckoning is not a complete replacement for GPS-supported navigation.

Dead Reckoning (gyroscope)

TMC (Traffic Message Channel) (optional)
The Traffic Message Channel (TMC) is a digital radio data service that functions in a similar way to RDS and is used to transmit disruptions to traffic to a suitable reception device.
The traffic information is continuously transmitted across FM.
The user is less dependent on the half-hourly broadcast traffic information, because the
signal is continuously transmitted. Apart from this, important information, as in the case of
an accident in the road ahead, can be passed on immediately.
The transmission is planned for the whole of Europe and is already offered by radio transmitters in many countries. The precision of the TMC messages can deviate greatly according to the country. At time of printing a TMC service is not available in Ireland.
The evaluation of TMC messages is not supported by every type of navigation software.
Enquire whether your system supports TMC before the possible purchase of a TMC receiver.
In Austria, the TMC traffic messages are made available by the TMCplus service. TMCplus
stands for an even faster and more efficient passing on of traffic messages. It is a cooperation between ASFINAG and the Hitradio Ö3 radio broadcaster.

PayTMC / Trafficmaster (optional)
TMCpro (a service of T-Systems Traffic GmbH) mainly uses an automatic system to record
the traffic situation, while the normal TMC relies on information from the police, ADAC
and reports of traffic jams. Sensors on autobahn bridges, strips of sensors set into the carriageway and a large number of vehicles equipped with ‘Floating Car Data’ technology
quickly supply a precise and more current image of the traffic situation on German autobahns, including predictions of possibilities.
Your navigation system will support both services and is set for the reception of both of
them in the status at delivery.

Trafficmaster (optional)
The Trafficmaster is a premium TMC service for the UK. It is supported by a network of
7,500 sensors constantly monitoring traffic flow over 8,000 miles of motorways and Aroads.

TMC (Traffic Message Channel) (optional)

Connecting the TMC Dipole Aerial (optional)
A TMC receiver is integrated into your navigation system, to receive traffic information.
However, reception will only be guaranteed if the TMC angled aerial supplied with the
device has been connected.
A TMC aerial is integrated into your active holder, so that operation should be guaranteed
in conurbations and strong transmission regions, even without an additional projecting
aerial. This will depend on the area and the vehicle.
The connection of an external projecting aerial is recommended to improve reception, if
no reception or only permanently insufficient reception is possible through the integrated
aerial.
1. Push the jack connector of the TMC aerial into the TMC connection of the active
holder.
2. Attach the aerial, on the edge or your windscreen, for example, with the help of the
sucker.
3. Place the aerial so that a distance of approx. 10 cm from the metal frame of the
screen is maintained.

(similar pictures)
Your navigation system will now be able to receive traffic information through the TMC
receiver and thus direct you away from disruptions to traffic.

TMC (Traffic Message Channel) (optional)

The Steering Wheel Remote (optional)
Operation with the steering wheel remote can only be used in connection with the optional holding casing with expansion plugs.

Safety Instructions


Always pay attention to the road traffic and never make settings while driving.



Installation within the steering wheel, in order not to impair driving.



Pay attention to the safety information related to your navigation system.

Batteries and Proper Treatment


KEEP CHILDREN AWAY from batteries. If by any chance, the batteries are swallowed,
consult a doctor immediately.



DO NOT CHARGE batteries (except rechargeable batteries).



DO NOT FORCIBLY DISCHARGE batteries.



DO NOT SHORT-CIRCUIT batteries.



DO NOT HEAT or DISPOSE OFF IN FIRE.



DO NOT DISASSEMBLE or DEFORM batteries. Your hands and fingers may be injured, or the liquid of the battery may get into your eyes or adhere to your skin. If
this happens, rinse with a large quantity of water immediately and consult a doctor.



DO NOT expose batteries to strong impact by dropping or throwing the batteries.



DO NOT reverse the positive (+) and negative (-) terminals to avoid short-circuit.



Do NOT MIX used and new or different types of batteries together.
Your equipment may not operate properly. In addition, the battery exhausted first
may be excessively drained (over-discharged).



REMOVE PROMPTLY the used batteries from the device.



REPLACE ALL BATTERIES with new batteries of the same type at the same time.



INSULATE THE TERMINAL parts with tape or the like at the storage or disposal of the
batteries.



DO NOT throw rundown batteries in the domestic refuses! Respect the environment and throw them in the specific containers for separate collection. If necessary,
turn to your reseller or to our service assistance. Thank you!

The Steering Wheel Remote (optional)

Button Layout


Replay and Pause in the case of the use of an
MP3-player



Previous title



Next title



Navigation button



Navigation button



Navigation button; this button is always occupied by the function on the right under the
display in Navigation Mode



Navigation button; this button is always occupied by the function on the left under the
display

Confirm your selection
Accept a call
Terminate a call
Readiness mode - Power off if the button is
pressed for a long time

+VOL

Increase the volume

-VOL

Decrease the volume

The Steering Wheel Remote (optional)

Installation
1. Open the battery compartment of the
steering wheel remote.
2. Place two button batteries (type: LR44,
3V) into the battery compartment. Pay
attention that the polarity corresponds
to the illustration engraved in the battery compartment (+ and + and – and
– must agree).
3. Place the belt around the steering
wheel as illustrated.
Note
Select a position on the steering wheel
where the remote control will not interfere with your normal grip on the
steering wheel, while doing this.

4. Close the belt so that it sits firmly
around the steering wheel.
Attention!
Pay attention that the four holding
lugs of the band lie exactly as shown
on the illustration.

The Steering Wheel Remote (optional)

5. Now, cut the belt off shortly below the
point of attachment.

6. Push the remote control onto the two
upper holding lugs initially.

7. Press the remote control down gently
into the two lower holding lugs, until
it engages audibly.

Note
Do not apply any force, in order to
avoid damage to the support and/or
the steering wheel remote.

The Steering Wheel Remote (optional)

Working with Memory Cards
Inserting Memory Cards
1. Carefully take the optional memory card out of its packing (if included). Take care
not to touch or dirty the contacts.

2. Insert the memory card carefully into the card bay with contacts pointing forward.
The card must lock easily.

Removing Memory Cards
Note
Only remove the memory card if the navigation software has been closed
and the device has been switched off by means of the On/Off button beforehand. Otherwise you will risk a loss of data.
1. To remove the card press lightly onto the upper edge until it ejects.
2. Pull the card out without touching the contacts.
3. Store the memory card in the packaging or in another safe location.
Note
Memory cards are very fragile. Take care not to dirty the contacts and not
to force the card.

Accessing Memory Cards


The appliance only supports memory cards in the FAT16/32 file format. If you
insert a card prepared with a different format (e.g. in cameras, MP3 players),
your navigation system may not recognise it and will ask you to format it
again.
Attention!
Formatting the memory card irretrievably wipes out all data.

Working with Memory Cards

Data Exchange via Card Reader
If you wish to copy large quantities of data (MP3 files, navigation maps) to the memory
card, these can also be stored directly to the memory card.
Many computers already have memory card devices. Insert the card into your computer
and copy the data directly to the card.
Because of the direct access you can achieve a much higher transfer rate compared to
using ActiveSync®.

Additional Card Material
Your navigation system is already equipped with digitalised map material in the internal
memory and/or memory card at the factory. Depending on the configuration, additional
maps may be included on your navigation CD/DVD. You will be able to transfer these
cards to a memory card immediately. It is recommended that you use an external card
reader (see also page 84). The GoPal Assistant supplied with the device enables a simple
and individual compilation of the map material to be transferred.
Depending on the amount of map data on the navigation CD/DVD, memory cards with
capacities of 256 MB, 512 MB, 1.024 MB or more may be required.
You can obtain additional memory cards in specialist stores.

Transfer of card material to a memory card
The transfer of additional card material to a memory card can take place through Explorer
on your PC via the following steps:

1. Insert the CD/DVD with the card material required.
2. Start your workstation and select your CD/DVD Drive.
3. Copy the file with the .psf ending out of the Directory of the region that you require to the MapRegions Directory on your memory card, from the CD/DVD.
You can transfer several files with map material to your memory card, depending on the
capacity of the memory card.
If you have copied digitized maps of several countries or country groups onto your memory card, you will be required to select the desired map in the navigation
application of your device.

Working with Memory Cards

Alternate method of installing Navigation Software (using a
memory card)
The software for your navigation system can be installed directly from a memory card.
The pre-installed software may have to be uninstalled beforehand (see special Clean Up
function, Page 69).
You will be requested to install the navigation software during the initial adjustment.
Please proceed as follows:
1. Remove the memory card from the packaging carefully. Ensure the contacts are not
touched or soiled.
2. Push the memory card into the corresponding slot until it engages.
3. Click on OK, in order to install the application.
The main screen, through which you will now be able to carry out the navigation settings,
will appear after all data has been copied to your navigation system.

Transferring Installation Files and Map Material to the Internal
Memory
Note
The navigation system must be connected to a computer by means of
ActiveSync® for the transfer of the data.
Your device has an internal, permanent memory, which is located in the \My Flash Disk
directory.
®

You will be able to make this directory, and others, visible with ActiveSync , by means of
the Search option. Directories and files can be manipulated as in Windows Explorer.
The required directory must have been stored, in order to make the installation files and
the map material for the device available.
Deposit the INSTALL directory for the installation files at (\My Flash Disk\INSTALL). Deposit
the map material in the MapRegions directory (\My Flash Disk\MapRegions). Please pay
attention to the modes of lettering given above when naming the directories.
Pay attention to the fact that sufficient drive capacity must be available, if you have stored
additional data on your navigation device. Remove files not needed if sufficient drive capacity is not available.

Working with Memory Cards

Specifications
Parameter

Information

Power supply

CA-051-00U-00 / CA-0511MH-2F
(Mitac)

Power supply cable for a cigarette
lighter
Input
Output

12-24V DC, 800mA / Sicherung 2A
(T2AL/250V)
5V / 1A (max.)

Battery

Li-Ion, 3.7 V

Earphones

Stereo earphones (3.5 mm)

Memory card type

Micro-SD

Bluetooth (optional)

Class 2

USB interface

USB 2.0

Dimensions

approx. 133 mm x 90 mm x 16 mm

Weight incl. battery

approx. 185 g (without packaging)

Temperatures

Operating
Storage

Humidity (without condensation)

10 – 90 %

Specifications

+41 °F – +95° F
(+5° C - +35° C)
+32 °F – +140 °F
-0° C - +60° C

Model Overview
TMC via
integrated
TMC
receiver and
TMC dipole
antenna

Dead
Reckoning

Model

Microphone

Bluetooth

X4345







X4545



 = Equipment available
 = Equipment not available

Model Overview

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Shielded interface cables, if any,
must be used in order to comply with the emission limits.

Model Overview

Conditions of Warranty for the United
Kingdom
Restricted Warranty
I. General Conditions of Warranty
1. General
This warranty covers defects relating to workmanship and manufacture in MEDION products. The period during which this warranty is valid and during which claims against the
warranty can be made to MEDION must be in accordance with the following terms in
order to be considered eligible:


Is effective from the date of purchase or receipt of the MEDION product from an
authorised seller of MEDION products; and



expires at the end of the warranty period specified on the warranty card provided
with the product.

For the warranty to be valid, you must:


provide suitable evidence of purchase, a copy of the original purchase receipt from
an authorised seller of MEDION products is preferred; or



register your product within 28 days of purchase either online at
www.MEDION.co.uk or by completing and returning the pre-paid registration card
included with the product.

Please keep the original purchase receipt and the warranty card in a safe place. MEDION
and its authorised sellers reserve the right to refuse a repair under warranty or a warranty
confirmation if a proof of purchase [or registration of purchase] cannot be established, or
has not been, submitted.
When it is necessary to return your product for repair please ensure that your product is
suitably packed for transportation.
Provided that your product is still within warranty (please check the duration of the warranty period as described above) and is eligible for repair or replacement under the terms
of the warranty, to return your product, please telephone MEDION on the service hotline
number. You will be sent a pre-paid transportation box suitable for returning your product
to MEDION. PLEASE MAKE SURE THAT YOU HAVE A BACKUP COPY OF ALL DATA ON THE
PRODUCT BEFORE RETURNING THE PRODUCT TO MEDION. MEDION shall bear the costs
of postage and packaging for returning the product and the transportation risk. However,
if following examination of the defective product in question, MEDION, in its reasonable
opinion, considers that the defect has been caused by:

Conditions of Warranty for the United Kingdom



your operating and/or using the product other than as instructed in the accompanying documentation;



damage caused in transit as a result of your negligence in packaging of the product; and/or



otherwise than in accordance with the terms of this warranty;

This warranty shall be void and you may be required by MEDION to reimburse MEDION
for the reasonable costs of postage and packaging before MEDION will return the product
to you. If so and you would still like MEDION to repair or replace the product, MEDION
may do so but you will be charged MEDION’s standard rates for repair and replacement
for this service.
Before returning the product, please contact MEDION via the service hotline or via the
internet (www.MEDION.co.uk). You will receive a reference number (RMA No.) on the
warranty card. Please mark the outside of your package to ensure that this reference number is clearly visible. Please submit a letter containing as much detailed information as
possible and, a full description of the defect or fault.
This should include:


a description of the fault;



when it occurred, how long it has been evident and how frequently it occurs;



any errors message(s) displayed when using the product;



a description of the circumstance(s) and conditions in which the fault occurs; and



whether it is an intermittent or persistent fault;

This will greatly assist MEDION in identifying the defect, when submitted together with the
defective product.
Unless otherwise instructed by a MEDION representative in all cases, the product must be
returned complete with all parts which were included with the original product. Incomplete contents of the returned package may lead to a delay in the repair or replacement.
MEDION does not accept any liability for any additionally submitted material(s) which
were not supplied with the original MEDION product.
This warranty does not affect your statutory rights in any way and is subject to the applicable legal statutes of the country where the product was sold to you by an authorised
MEDION seller.

Conditions of Warranty for the United Kingdom

2. Scope
Subject to any exclusions set out within this warranty, where there is a defect in your
MEDION product covered by this warranty, MEDION will repair or replace the MEDION
product. The decision whether to repair or replace the product will be made solely at the
discretion of MEDION. MEDION may, in its own discretion, replace the product returned
for repair under warranty with a replacement product that is either identical or, in the
event that such product(s) are no longer available, a product of equal or superior specification and quality.
No warranty is given for batteries or rechargeable batteries or for consumable materials
subject to wear and tear, i.e. for parts which have to be replaced periodically during the
normal use of the product, such as video-projector lamp.
Non critical failures that fall within industry specified tolerances e.g. noise, LCD pixels are
not covered by this warranty. Please consult the appropriate section in your user or instruction manual for this product for exact specifications and tolerances.
To the extent which is permitted under law, MEDION will accept no liability for burnt-in
images on plasma or LCD products as a result of normal wear and tear during the operation of the product. Please refer to your user or instruction manual for this product for
detailed operating instructions for your plasma or LCD product.
The warranty does not cover errors relating to the playback of data media in an incompatible format or created with unsuitable software.
If it is found during repair or assessment that the defect concerned is not covered under
warranty, MEDION reserves the right to invoice you for all reasonable costs incurred by
MEDION. These costs will be in relation to the return of the product, including reasonable
administration costs, plus reasonable costs for materials used and labour provided when
repairing or replacing the product. This is subject to MEDION providing you with an estimate for carrying out such work prior to costs being incurred and that you have accepted
the estimate.
You are entitled to seek independent advice or consultation relating to your product or
any of MEDION’s findings. MEDION will not be liable for any costs incurred to you when
doing so.

Conditions of Warranty for the United Kingdom

3. Exclusion from warranty
To the extent permitted by law, this warranty shall be void in the event that defects or loss
caused by:
a. failure and damage resulting from the operation of the product in an environment
other than that recommended in the accompanying user or instruction manual
(e.g. in direct sunlight or in a damp room);
b. accidental damage;
c. use other than in accordance with the accompanying user or instruction manual;
d. modifications, conversions, expansions, maintenance and/or repairs made to the
MEDION product by unauthorised repairers or use of unauthorised third party
parts;
e. negligence;
f. virus attack or software errors; or
g. improper transportation or packaging during return of the product.
This warranty will also be considered void if labels or serial numbers of the product or of a
component of the product are modified or made illegible.
To the extent permitted by law, MEDION shall; only be responsible for losses which are a
reasonably foreseeable consequence of the relevant defect in the product; MEDION will
not be responsible for any costs incurred in relation to software configuration; economic
loss; loss of opportunity; loss of income; or loss of data or software arising out of its repair
or replacement of a MEDION product under this warranty.

4. Service Hotline
Before returning the product to MEDION you must contact us using the service hotline or
via the internet (www.MEDION.co.uk). You will receive further instructions for making
your claim under warranty when you call.
The service hotline is available on 362 days in the year, including Sundays and bank holidays but excluding Christmas day, New Years Day and Easter day. The service hotline is
subject to [national rate] telephone call charges. These charges are subject to change. The
price of your call will be stated at the beginning of the call.

Conditions of Warranty for the United Kingdom

II. Special warranty conditions for MEDION PC, notebook,
pocket PC (PDA) and navigation devices (PNA)
The following terms apply to MEDION PC, notebook, desktop, pocket PC and laptop
products and optional items included with such products. If one of these items has a fault,
you also have a warranty claim for its repair or replacement, from MEDION. The warranty
covers the costs of materials and labour for repairing or replacing the defective MEDION
product or the optional item in question.
Hardware connected to your product that was not produced or marketed by MEDION can
invalidate the warranty if MEDION can reasonably demonstrate that damage to the
MEDION product or of the optional item included with the delivery was caused by such
hardware. You are entitled to seek independent advice or consultation relating to your
product or any of MEDION’s findings. MEDION will not be liable for any costs incurred to
you when doing so.
This warranty is restricted in relation to any pre-installed operating system as well as to
application programme software that is included with the MEDION product in question.
This warranty is restricted as follows:
For pre-installed operating system as well as to application programme software included
in the MEDION product, MEDION only guarantees the data media (e.g. the diskettes and
CD-ROMs) upon which this software is delivered and warrants that such data media shall
be free from material and processing defects for a period of 90 days from the date of purchase of the MEDION product from an authorised seller of MEDION. MEDION will replace
defective data media free of charge.
Any claims in respect of defective pre-installed operating system as well as to application
programme software are hereby expressly excluded and you should contact the relevant
licensor or copyright owner of the defective software in question. MEDION does not guarantee that any software supplied with MEDION products will function without interruption, will be free from errors or that it will fulfil your requirements. MEDION does not
guarantee the 100% accuracy of the maps provided with the Navigation device.
It may be necessary to delete all data in the product in order to repair the MEDION product. PLEASE MAKE SURE THAT YOU HAVE A BACKUP COPY OF ALL DATA ON THE
PRODUCT BEFORE RETURNING THE PRODUCT TO MEDION. To the extent permitted by
law, MEDION excludes all liability for loss of data and MEDION recommends in all cases
that you back up all data on your MEDION product before returning the product to
MEDION.

Conditions of Warranty for the United Kingdom

III. Special warranty conditions for repair on site or replacement on site
If a claim for repair or replacement on site is included within the terms of the warranty card
provided with the product, the special warranty conditions for repair or replacement of
your MEDION product on site apply.
The following provisions must be made by you for carrying out repairs or replacements on
site:


MEDION or its authorised personnel must have unrestricted, safe and immediate
access to the products.



Telecommunication facilities required by MEDION or its authorised personnel for
proper execution of your order, for testing and diagnostic purposes and for remedying faults are provided by you at your own expense.



You are responsible yourself for restoring the application software after the repair
services have been carried out by MEDION or its authorised personnel.



You must take all other necessary steps to enable MEDION or its authorised personnel to carry out your order properly.



You are responsible yourself for connecting and configuring any existing external
peripheral products after MEDION or its authorised personnel have carried out their
repairs.



The free cancellation period for repairs or replacements on site is 24 hours, thereafter our reasonable costs resulting from late or missing cancellation shall be invoiced
at your expense.

Liability limitations
The contents of this manual are subject to unannounced changes caused by technical
progress. Manufacturer and sales shall not be responsible for any damages which have
been caused as a result of omissions or errors in the information provided in this manual.
Under no circumstances shall we be liable for any of the following:
1. Claims made against you by third parties based on loss or damage.
2. Loss or damage to your blanks, recordings or data.
3. Economic follow-on damage (including lost profit or savings) or associated damage even in the case that we have been informed of the possibilities of this type of
damage.
In some countries the exclusion or limitation of accompanying or follow-on damage is not
legally accepted so that the above limitations do not come into force.

Conditions of Warranty for the United Kingdom

Index
Customer Service ............................... 68

A
Accessing Memory cards .................... 83
Active Holder ...................................... 10
®
ActiveSync -Mode ............................... 74
Additional card material ...................... 84
Aerial Orientation ............................... 29
AlarmClock (Wake up function)
Ending the application .................... 60
Selecting an alarm signal ................ 58
Setting the system time .................. 57
Setting the volume ......................... 59
Snooze function.............................. 60
Interfaces ........................................ 56
Main screen .................................... 55
Alternative installation of the
navigation software from a
memory card .................................. 85
Ambient temperature ........................... 2
Attaching the Navigation System ........ 30
Auto run ............................................. 72
Auto start ............................................ 72

D
Data exchange ................................... 84
Data Security........................................ 1
DC AutoSuspend ............................... 70
Dead Reckoning (gyroscope) ............. 76
E
Earphones .................................... 10, 11
Electromagnetic Compatibility ............. 3
EMC ..................................................... 3
F
FAQ.................................................... 67
FCC Compliance Statement ............... 88
Fingerprint sensor ................................ 9
G
GPS .................................................... 75
H
Hard Reset .......................................... 26
Hotline ............................................... 68

B
Batteries.............................................. 79
Battery Charge Indicator ....................... 8
Battery Operation ................................. 4
Bluetooth
Accepting incoming calls ................ 45
Main screen .................................... 43
Making calls .................................... 45
Pairing ............................................ 44
Starting the application .................. 42
Bluetooth indicator ............................... 8

I
Initial set up
Charging the battery ...................... 12
Installing the navigation software .. 16
Power supply ................................. 13
Switching on the device ................. 14
L
Liability limitations ............................. 94
Loudspeaker ........................................ 9

C
Cabling ................................................. 3
Card reader......................................... 84
Care of the Display ............................... 5
CleanUp ....................................... 17, 69
Contact Manager
Create database .............................. 61
Main Screen .................................... 62
Storing Contacts ............................. 62

M
Mass Storage mode............................ 73
Memory card insertion slot ................ 10
Memory cards .................................... 83
®
®
Microsoft ActiveSync ........................ 72
Mini-USB-Connector .................... 10, 11
Model Overview ................................ 87
Mounting the car holder .................... 29
MP3 Player ......................................... 47

Index

List of favourites .............................. 49
Bookmarks ...................................... 49

Service
Faults and possible causes .............. 68
Hotline ........................................... 68
Specifications ..................................... 86
Speech commands............................. 36
Standards
FCC Compliance Statement ........... 88
R&TTE .............................................. 4
Starting the navigation software ........ 32
Steering wheel remote
Installation ..................................... 81
Steering Wheel Remote ...................... 79
Sudoku
Description of the switch fields....... 66
Main screen ................................... 64
SuperPIN ...................................... 20, 23
Supplied Items ..................................... 7
Synchronisation with the PC .............. 72

N
Navigation
Mounting the car holder ................. 29
Safety instructions .......................... 27
Starting the navigation software ..... 32
Steering wheel remote (optional) ... 80
O
On-/ Off button .................................... 9
Operating
Switching on/off the device ............ 17
Operating Environment ........................ 2
P
Password ............................................ 18
PayTMC .............................................. 77
Picture Viewer
Main screen .................................... 50
Operation ....................................... 50

T
TMC ................................................... 77
Connecting TMC Dipole Arial ......... 78
Touch Screen ....................................... 8
Trafficmaster ...................................... 77
Transfer of card material to a memory
card................................................ 84
Transferring Installation Files and
Map Material to the Internal
Memory ......................................... 85
Transport ............................................. 6
Travel Guide ...................................... 53

R
R&TTE .................................................. 4
Recycling and Disposal ......................... 5
Repair ................................................... 2
Resetting the navigation system
Hard Reset ...................................... 25
Soft Reset ........................................ 25
S
Safety and Maintenance ....................... 1
Safety instructions
Navigation ...................................... 27
Connection ....................................... 3
Ambient temperature ....................... 2
Data security ..................................... 1
Operating environment .................... 2
Repair ............................................... 2
Cabling ............................................. 3
Battery operation .............................. 4
Maintencance ................................... 4
Care of the display ............................ 5
Transport .......................................... 6
Security .............................................. 18

U
UUID ............................................ 20, 23
V
Views
Back components............................. 9
Bottom components ...................... 10
Front components ........................... 8
Top components.............................. 9
W
Warning function for traffic
monitoring points .......................... 33
Warranty ............................................ 89

Index

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:05:28 15:55:36+02:00
Create Date                     : 2010:05:28 15:54:41+02:00
Metadata Date                   : 2010:05:28 15:55:36+02:00
Format                          : application/pdf
Title                           : Microsoft Word - X4x45 Generic EN Gopal 5.5 RC1.doc
Creator                         : koops
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:93d45b7a-2ae7-4fba-89aa-4cd7f7bbff6c
Instance ID                     : uuid:595cf04a-ac7e-4813-8eef-af1a26ca3cd4
Page Count                      : 102
Author                          : koops

EXIF Metadata provided by EXIF.tools