Megavision MV141 LCD MONITOR User Manual MV141 ENG 0510

Megavision co., Ltd. LCD MONITOR MV141 ENG 0510

Contents

USERS MANUAL

TFT LCD MONITORUser's Manual
FCC NOTE :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
2Please read the cautions carefully before using this productDo not scratch the screen of theLCD monitor with sharpmaterials such as nails andpens.The interior part of the monitor iscomposed of electric elements. Ifthe monitor is broken, do not tryto disassemble it, because it isnecessary to contact appropriatetechnical services in order tohave the product repaired.Take care of the LCD monitor sothat it is not damaged by theexternal impact.Take care not to use damagedcords and keep this product outof reach of children and personswho are not involved in using theproduct.Disconnect the power cablewhen the monitor is not usedduring a long period of time whileyou are away from home.Do not use this product near thewindows receiving direct sunlightor direct natural light.Choose a fresh and dry area andprotect the monitor from extremeconditions of temperature andhumidity, dust and smoke.Adequate temperature = 0-40°∆C.Adequate humidity = 30-80 RHThe LCD monitor screen can bedamaged in the case that youclean the surface by usingacetone, ethyl alcohol or aciddetergent.Do not install the monitor in asloping place that is not safe dueto the fact that the product can falldown and be broken, thus doingharm to other persons.Check the power voltage beforeconnecting to the AC powercable.Take care so that the monitor isnot in contact with magneticmaterials, metals and inflammablesubstances.NoteThis product uses the TFT LCD panelproduced using state-of-the-art technology.The TFT LCD panel consists of millions ofpixels and there is much probability ofoccurrence of bad pixels. Due to thisreason, red, blue and green pixels mayseem to shine and some black pixels maybe visible. But this does not mean that thequality of this product is bad. You can usethis product without worrying about theworsening of product performance.
3IntroductionThank you for buying our TFT LCD monitor.Our monitor is a high-resolution monitor that has features of electromagneticwave blocking, reduction in electricity consumption, and efficient use of space.In view of the fact that this user's manual is prepared for helping you toadequately use the product, it is recommendable to read the user's manualbefore using the product.Product features1) This product has a 15-inch flat surface (Color Active Matrix TFT LCD) with a pixel size of 0.297 mm (H) x 0.297 mm (V) for displaying an ultra-precision, high-resolution image.2) This product uses TFT (Thin Film Transistor) LCD panel and supports a maximum of 1024 x 768.3) This product is a monitor whose deflection frequency is automatically transformed up to 30 - 80 kHz horizontally and up to 56 - 75 Hz vertically.4) This product is compatible with IBM PC and Apple Macintosh (a different adapter is necessary for Apple Macintosh).5) This product has a power-saving function less than 40 W in ON mode, less than 3 W in stand-by mode, less than 3 W in pause mode and less than 3 W in OFF mode in comparison with other monitors.6) This product weighs just 1.7 kg.7) This product supports DDC and allows you to use 'Plug and Play'.Product featuresIn the case of some system requirements, it may not be compatible withPlug and Play.Registered as a device whose electromagnetic wave-blocking capacity isadequate (B Class).This product is registered as a device whose electromagnetic wave-blockingcapacity is adequate and can be used in all places (including homes).Note
Checking the productPlease check if the product contains the following items. If there are someitems missing, please contact the technical services.1. TFT LCD monitor2. User's manual (including product warranty).3. AC to DC adapter.4. Power cable (the power cable can be different according to use environment).5. Floppy diskette.Cautions when installing the product1. Install the product in a safe place.2. Install the product in a place without either moisture or dust.3. Do not install the product near direct sunlight or heating devices.Installation1. Turn off the power connected to the monitor before connecting to an external device.2. Power connectionConnect the adapter to the DC jack connected to the signal cable of the monitor and connect the power cable.3. Signal connectionThis signal input terminal is a D-SUB connector. Connect the signal cable to the signal input of the computer.4. Turn on the power of the monitor.5. Turn on the power of the system that you want to use.6. Continue with the operation when the screen appears. You can adjust thedesired status of the screen using control buttons at the bottom of the monitor.7. If you wan to finish the operation, turn off the system power and then turn off the power of the monitor.4Installation of the product
5Names and operation of control buttonsNames and operation of control buttonsThis monitor has several control buttons. They can be used according tothe user preference.Function of the buttonsPower button (POWER)If you press the power button, the indicator lamp is turned on, and the operation of the monitor is initiated. If you do not want to start the operation of the monitor, press the power button again.Power indicator lamp (green)Considering that this product has a power-saving function, if the powercable is connected, the power indicator lamp is shown as follows.MENUIf you press the menu button, the OSD (On-Screen Display) menu windowappears.(You can choose the desired item using the button (decrease)/ (increase)in the OSD menu, or you can modify the selected values.AUTO/SELECT buttonIf you press AUTO/SELECT button in the screen status, it is automaticallyadjusted for the optimal size and optimal position, and if you press thebutton, it functions as a selection button.MODE ON STAND BY SUSPEND OFFScreen Active Blanked Blanked BlankedGreen Green(blinks every second)Power indicatorlamp
You can select the OSD menu in the OSD window using all the control buttons atthe bottom of the screen. To change the current settings or adjust them for thedesired settings, follow the following steps.1. Press the Menu button to open the OSD menu window.2. Press the ◀/▶button to move the item of desired main menu.3. If you highlight the desired menu item, press the Select button.4. Press the ◀/▶button to move the desired sub-menu item.5. If you highlight the sub-menu item, press the Select button.6. Press the ◀/▶button to modify the current value.7. Press the Select button to save the modified value.8. To close the OSD menu window, press the Menu button or choose 'Exit (Salir) in the sub-menu window.The menu that can be configured by the user in this product uses the pull-down menu. The main menus are as follows.6Selection and operation of the OSD menuMENU SELECTMENU SELECT SELECT(Select the menu item)(Select themain item)(Select themain item)(Exit the OSDmenu window)The OSD window will disappear within a few seconds if there is no input in theOSD window. It does not appear when there is no input signal.Note1. ColorAdjusts brightness, contrast, sharpness and saturation.2. ImageAdjusts the position and sharpness of the screen.3. FunctionAdjusts the position, sharpness and saturation of the screen.4. OSD menuAdjusts the language used, the position of the menu screen, the display time of the menu screen and the saturation of the menu screen.5. MiscellaneousConfigures a certain screen status and initializes the menu value.Each menu has its correspondingitems.You can modify the value afterselecting the desired item accordingto the selection method and OSDmenu operation in the previouschapter.If you choose the menu, the iconcorresponding to the chosen menublinks, and the selected menuappears in the menu selectionscreen.Note /  / 
1. Color menuIf you press the menu button, the followingscreen appears.ï\é¶WindowContrastAdjusts contrast. 0 ~ 100BrightnessAdjusts brightness. 0 ~ 100Gamma correctionAdjusts the clarity of color. 0 ~ 31Color templateAdjusts the color desired by the user. 19300. 6500. 5000. User.Color adjustmentAdjusts colors (red, green and blue).- Red: Adjusts color saturation. 0 ~ 100- Green: Adjusts color saturation. 0 ~ 100- Blue: Adjusts color saturation. 0 ~ 100- Exit: Exits the current setting.ExitExits the current menu.7Menu2. Image menuHorizontal positionAdjusts the horizontal positionof the current screen. 0 ~ 100Vertical positionAdjusts the vertical position of the current screen. 0 ~ 100SharpnessModifies sharpness of the screen. 0 ~ 50 0 ~ 31PhaseAdjusts the center of the current screen. 0 ~ 30ClockIncreases or decreases the number of pixel to adjust the horizontal size.ExitExits the current menu.Main menu screenMenu selection screenSubmenu screenCurrent screen status
83. Function menu 4. OSD menuAuto-AdjustConfigures Auto-Position, Auto-Phase, Auto-Clock and Auto-Color at the same time.Auto-PositionAdjusts the position of thescreen automatically.Auto-PhaseAdjusts the center of the screenautomatically.Auto-ClockAdjusts the pixel size of thescreen automatically.Auto-ColorAdjusts the colors of the screenautomatically.ExitExits the current menu.MenuLanguageConfigures the language used in the OSDmenu. The languages are as follows: English,German, French, Italian, Spanish, ChineseSimplified, Chinese Traditional and Japanese.OSD horizontal positionAdjusts the horizontal position of the OSDmenu screen. 00 ~ 110OSD vertical positionAdjusts the vertical position of the OSD menuscreen. 00 ~ 110OSD timer- On: The OSD menu screen disappears after a certain time period.- Off: The OSD menu screen does not disappear even after a certain time period.Press the Menu button in order for the OSD menu screen to disappear.Translucent- On: Switches the OSD menu screen to the translucent mode.- Off: Disables the translucent mode.ExitExits the current menu.
9Menu5. MiscellaneousMode selection- 640 x 400: Optimizes the screen status for the status of 640 x 240.- 720 x 400: Optimizes the screen status for the status of 720 x 400.ResetResets all the functions.ExitExits the current menu. Description of operation messagesCable not connectedIt appears when there is no input signal from thecomputer.If the message disappears, the monitor status ischanged to energy-saving mode.Signal out of rangeIt appears when the input signal is out of range.Cable Not ConnectedSignal Out of Range
Timing guideThis product is a multi-frequency monitor.It functions in horizontal frequencies from 30 kHz to 80 kHz and verticalfrequencies from 56 Hz to 75 Hz. Due to its design based onmicroprocessor, it offers the functions of automatic synchronization andautomatic size. This monitor is equipped with 10 programmed configurationsthat are shown in the timing table. The followings are the ten configurations.Signal connectionThis signal input terminal is a D-SUB connector. Connect the signal cable tothe signal input of the computer.PresetResolutionHorizontalVESAMACVertical Horizontal VerticalFrequencyClock [MHz] Polarity (H/V)M1M2M3M4M5M6M7M8M9M1072064064080080010241024128012808324004804806006007687681024102462431.5KHz31.5KHz37.5KHz37.9KHz46.9KHz48.4KHz60.0KHz64.0KHz80.0KHz49.7KHz70Hz60Hz75Hz60Hz75Hz60Hz75Hz60Hz75Hz75Hz28.32225.17531.50040.00049.50065.00078.750108.000135.00057.284- / +- / -- / -+ / ++ / +- / -+ / ++ / ++ / +- / -VGA10Timing guideDisconnect the power connected to the monitor before connecting thesignal output of the system.PIN NO123456789101112131415RedGreenBlueNo ConnectionGroundRed GroundGreen GroundBlue GroundNo ConnectionGroundGroundSDAHouizontal-SyncVertical-SyncCSLDESCRIPTION DESCRIPTIONPIN NO105 15 16Note
11Product specificationsProduct specificationsLCDAngle of viewContrast ratioBrightnessRefresh rateDimensionWeightLeft/RightTyp.Typ.PCMaximumInputOutputConsumptionTemperatureHumidityAltitudeTemperatureHumiditySet / PackingInput SignalPower 15-pin D-SUB Jack type DC+12 V InStorageconditionsFeatures285.696 mm(H) x 214.262 mm(V)MaximumCompatibilityConnectors Voltage/PowerScreen sizeType ★The design and specifications of the product are subject to change without previous notice to improve the quality of the product.2Glass surfaceScreen statusAnti-glare coating14" diagonal view able screen TFT Thin FilmTransistor Active Matrix Panel0.279mm(H)×0.279mm(V) pixel pitch RGBvertical stripe262, 144 colorsColor filterColors 90° / 60°200 : 1150 cd/m IBM XT, AT, 386, 486, Pentium or PS/2 andcompatibles (from VGA up to 1024x768 @75Hz Nl).1024x768 @ 75 Hz Nl (60 Hz for optimal display)AC 100-240 V, 50-60 Hz DC 12 V 40 watts33°F ~ 104°F (0°C ~ 40°C) 20%RH-90%RH(no condensation) Up To 10,000 feet-14°F ~ 104°F (-20°C ~ 40°C) 5%RH-90%RH(no condensation)319.4mm(W)×272.7mm(H)×140mm(D)1.7 kg / 2.5 kg
Before asking for repair serviceYou can contact our technical services or selling agency if you want to askfor repair service. Check the following before you ask for repair service.Screen shows no image.- Check if the power cable is correctly connected.- Check if the power of the monitor is turned off.- Check if the system power is turned off.- Check if the signal cable of the monitor is connected.Screen is too dark or bright.- See color menu (see page 7).Screen is tilted left / right or upward/downward.- See position menu.- Run Auto-Tune function.Date of purchasePurchased fromTelephone:12Before asking for repair service

Navigation menu