MeiDong Acoustics HE3 Bluetooth Headphones User Manual
Shenzhen MeiDong Acoustics Co., LTD Bluetooth Headphones
User manual
SAFETY RULES
2. Please pay attention to the sharp edge,uneven
surface, metal parts, accessories and packaging.
3. Please do not open, dismantle or repair this product,
this may lead to fire,electronic breakdown or even
completely damage the product, these are not included in
the waranty.
4. Do not wipe the product with oil and other volatile
liquids.
5. Please do not use this product in places where
there is a potential personal safety risk and danger.
PACKING LIST
A pair of Earbuds, mobile battery,Silicon Holder L
and M each pair . Silicon Lagre ,medium and small
earbud cap each pair ,data cable, storage bag, user’s
manual.
Earphone
Micro USB
battery cabinet manual
cloth bag
L
M
S
PRODUCT OVERVIEW
Please fully charge the battery of the headset and
the battery in charging dock before the first time
operation. During magnetic contact charging, the red
indicator will stay on, and it will turn blue when fully
charged.
Note:
1.During music playing, the blue LED indicator
will blink slowly.
2. The red LED indicator will flash when the
headset battery is low.
QUICK START GUIDES
CHARGING METHODS
1. To ensure safety, please follow the rules
mentioned in this manual. Before using the
Bluetooth headset, we strongly recommend that you
read this manual carefully.
Touch Two Head-Set supports all function by
Touch operations. Our Design Team puts emphasis
on both ergonomic design and user-experience as
most important causes.Unlike most in-ear headsets
which support push-button operation only.
Our touch-operation eliminates the discomfort
to your ear while applying pressure to the button.
Operation becomes effortless and comfortable.
We use all funtion by touch in our design which
is extremely convenience when you sprot,enjoy
music,and drivingor other activity.
Touch Two is also perfect for the active lifestyle,
fast movements and high-impact workouts. The
removable outer silicone sleeve is slip-resistant and
comfortable to fit for all ear sizes.
STEP ONE: WEAR THE HEADSET CORRECTLY
1, pay attention to identify the left and right mark, L
for the left, R for the right .
2, With the font "L" and "R" normally viewed and
with the correct angle from up to down, insert the
earbuds into the ear properly, rotate it appropriately
and feel the most comfortable and not easy to drop, and
if it will not drop when trying to shake your head, it
indicates wearing is ok.
3, For the user with smaller ears, try to remove the
earbud cap, try to wear again.
4, in order to get the best audio experience, please
try every different size of the silicon earbud cap.
1. Before the right and left earbud pairing, turn off the
Bluetooth function of your phone toavoid two earbud’s
pairing name appearing at the same time, please do not
click any one of two pairing names if you have not
closed the bluetooth function on your phone.
2. Hold down the multi-function button on right and
left earbud for about 6 seconds, the tone "Power on" and
"Pairing" will be heard oneafter another, wait until the
earbud sending the "beep beep" tone , then loosen your
hands immediately , the earbuds now enter into pairing
mode and the interval " Beep " tone will sound,now the
red and blue indicator flashes alternately, once you hear
" beep " tone, the earbud pair with each other
successfully and the blue LED indicator will flash
slowly.
3. After pairing success, regardless of whether to
connect the phone or not, hold down touch screen on
right or left earbud for 3 seconds, both earbud will be
turned off and the tone "Power off" will be heard.
4. Automatic connection: it need to connect the phone
and play music, please operate as the STEP THREE
operation, connect the left earbud with the phone, then
power on the right earbud, once your hear “Beep” sound,
automatic connection is completed.
STEP THREE: THE PAIRING OF THE
EARBUD AND PHONE
1. Initial connection:
1.1 Activate the Bluetooth function on phone and
enter the Bluetooth settings interface
1.2 Power on the earbud and try pairing:
Hold down the multi-function button for 4 seconds,
the red LED indicator will flash fast, the tone "Power
on" and "Pairing" will be heardthe pairing name "Touch
one " will appear on pairing list, select it, if a password
needed, please enter" 0000 ", when a" beep "sound tone
heard, the connection is successful, now thegreen
indicator will flash slowly, the earbud connected will be
the main unit and it can be connected with the phone for
communication.
1.3 Stereo connection of two earbuds:
Make sure you have completed the 1.2 operation, and
both earbuds paired, short press to open the right earbud,
onec “beep” heard, now it enters stereo mode, the green
indicator will flash slowly, now you can enjoy “Touch
one” unrestrained wireless stereo!
1.4 Earbud shutdown:
Hold down the multi-function button for about
4seconds, the red indicator will turn off and the"Power
off" tone will beheard.
2. Automatic pairing after pairing
Hold the multi-function button on left earbud for 2
seconds, once the "Power on" tone heard, then loosen
your hand, the left earbud will automatically connect
with the phone, once the "beep" tone heard, the
connection is successful. The left earbud will connect
with the right earbud if the right earbud is powered on at
the same time.
Note: The system will define the earbud as the
left channel which connect with phone first, so
connect the left earbud with thephone first. Of
course, you can also choose the right earbud to
connect with the phone.
NOTE:
●When the Touch one is not in pairing mode, the phone
will not be able to search for the earbuds. Please confirm
before searching (red and blue indicators flash
alternately).
● If the earbuds can not search the pairing unit(about
5 minutes), it will turn off automatically.
STEP FOUR: THE OPERATION
“Touch Two” allows the user to use the touch mode
according to the different scenes or personal habits.
1.Earbud Calling:
When the button on main earbud is effective during
calling(caller number will be prompted), and the sound
only exits in the main earbud.
2.Answer or End Calling:
2. Indicator display:
2.1 power level display:
There are four indicators on mobile power supply, one
indicator represents 25% of the electricity it indicates
only 25% of the electricity remained when only one
indicator lighting.
2.2 during charging :
The red indicator will stay on, and it will turn blue after
fully charged. the four indicators will display the
remaining power while the earbud is just put into the
charging dock,and the cycle of flash, the mobile power
indicator will turn off after about 5 seconds.
2.3 shutdown state:
Put the earbuds into the magnetic contact, during
charging the mobile power, It will activate the indicator
and showing the remaining power.
3. Charge the mobile power supply
Use a USB cable to connect the phone adapter or the
computer's MIC-USB port.
Product parameters
Battery: Polymer lithium battery 45mAh
Bluetooth version: 4.1
Operating voltage: 3.2V-4.2V
Sound unit: 8MM moving speakers
Impedance: 32Ω
Speaker sensitivity: 105dB
Speaker Bandwidth: 20-20KHz
Microphone sensitivity: -42 + -2db
Bluetooth frequency: 2.4-2.48GHZ
Bluetooth working range: 10 meters
Bluetooth protocol: A2DP / HFP / HSP / AVRCP
Eardbud working range: 10M
Single earbud calling time:3hours
Single earbud music time: 2 hours / battery life: 6hours
Single earbud standby time: 12 hours * / battery life:
240 hours
2. Call time and music playing time test bases on the
70% volume.
3. Standby time: the longest standby time when no
call and no music playing.
4. Battery life time is the number of hours for
charging the earbud once the battery is fully charged.
5. In different environments, such as low temperature
environment, the battery life of the earbud and mobile
power battery will be affected.
1. Working(communication) range will change
depending on the operating environments
NOTE:
You must choose a certified chargers produced by
authorized manufacturer. If the product is not used for
long period (more than 3 months), please recharge it.
Mobile power supply
Charger capacity: 300 mAh
DC charging voltage: DC5V
DC C
FCC ID: 2AB5T-HE3
harge Current (MAX): 1A
Product certification:
Warning:
S YMPTOM POSS IBLE CAUS ES POSS IBLE S OLUTION
Battery is low Recharge the earbuds
The volume is too high or the environme
nt is too noisy Adjust the volume or change a place
Pairing operation is incorrect Re-pairing
Environmental in terference or operation r
angei s too far Change a place or make the earbud and
audio equipment closer
Earbuds are not put down properly Check if the earbud is in place
Operaion range is too far Put the phone closer to the main earbud or
keep it from the outer interference signal
Battery is low Recharge the earbud
Low battery and red indicator illuminates Recharge the earbuds immediately
Not wearing pro perly Adjust the position of the earbudsand adju
st the volume level manually
Unable to power on
No sound after paired
Can talk,but red indicator illuminates
No indicating when charging
Automatic shutdown of the earbud
With echo in earbud
Call with noise
Small voice on opposite side
Bad signal and intermittent
1. Do not use in thunderstorms, it may lead to failure
and increase the risk of electric shock.
2. Do not disassemble or modify the head phones for
any reason, as this may cause malfunction or burning,
send it to Authorized service centerfor repair.
3. Please put the earbuds and the accessories out of
the reach of children and pets,
4. Do not put the product in water.
Troubleshooting Guide
click the Touch interface once quickly, then the "beep"
sound will be heard, the phone is connected, double-
click the touch interface, then the "beep" sound will be
heard, the phone is hung up.
Tips:
●the user may not be familiar with the double-click the
rhythm during initial operation, it is recommended that
you wear a earbud, and with the other one in hand, and at
the same time watching the player to try several times,
you can quickly grasp.
●Click on the touch interface with the Intention
3.Rejected calls:
2.1 touch operation: hold the touch interface for 2
seconds to hang up.
4.Redial the last number dialed:
3.Touch the screen twice quickly to redial the last dialed
number.
5.Play / Pause
play music: double-click the touch interface the
music will automatically play, double-clickagain to pause.
6.Skip to Next:
During playing or pausing, hold the touch Interface
for 2 seconds to skip to the next song.Theoperation can
only be implemented by touch interface.
STEP FIVE: MOBILE POWER OPERATION
NOTE:
● Please fully charge the battery of the earbuds and the
battery in battery dock before the first time operation.
●During music playing, the blue LED indicator on
earbud flashes slowly.
●The battery of the earbud is low, the red indicator
will flash.
1. Charge the earbuds
“ Touch Two” takes the magnetic contact with two
charging dock as the charging method, automatically
align by aiming the earbud at the corresponding dock,
and it will start charging, during charging,the red
indicator will stay on, and it will turn blue after fully
charged.
STEP TWO: THE PAIRING AND
CONNECTION OF RIGHT AND LEFT
EARBUD
The second step of the left and right ear pairing
connection operation
2.4 Also, you could press the botton of the case, that selcet
the power on and off. one press, the power on, and charging
the earbuds. long press, cut off the power to charing.
新编 85*58.5MM/六折页/正反黑白印刷/158g铜版纸
正面
反面
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
elevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.