MeiDong Acoustics HE8E Bluetooth in-ear headphone User Manual HE8

Shenzhen MeiDong Acoustics Co., LTD Bluetooth in-ear headphone HE8

user manual

User’s Guide
234567788Contents-1-1. Introduction2. Battery Precautions 3. Getting Started4. Bluetooth Connection5. Function Guidance 6. LED Display Status7. Battery Charging 8. Product care9.Announcements
HE8Thank you for purchasing our ANC Bluetooth In-ear headphone: HE8. This device can be easily connected with smartphone, tablet PC and other devices via bluetooth during your traveling and daily usage. It will bring you an easy lifestyle. Load impedance: 32Ω Frequency range: 20Hz-20KHzPower supply: Lithium battery or USB cableAudio source: iPhone ,iPad ,Smartphone, PC, Laptop etc.Size: 22.8x10.8mm Operating range up to ten meters.-2-1. Introduction Specification
The device can be powered by a built-in rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of device. If the device is not used for a long period of time, the battery may be out of power. Please charge the battery.Rechargeable battery is only to be charged under adult supervision. Use only the supplied cable to recharge the battery . Improper charging may damage the battery and the device.Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside.Should a battery leak, the device may become damaged. Clean the battery compartment immediately, avoiding touching your skin.Keep the battery out of reach from children. If swallowed, consult a physician immediately.Do not dispose battery in a fire as it may explode. Battery may also explode if damaged. Please dispose it according to local regulation. Do not dispose it as household waste. -3-2. Battery Precaution
General controlsMICNC buttonNext /Volume upON/OFF Buletooth pairingPrevious / Volume downEarphone magnetic adsorption charging endUSB magnetic adsorption charging endOTG connector-4-3. Getting Started
-5-4. Bluetooth ConnectionAfter completing the steps above, a message on your device will appear confirming that your device is now paired/ connected.In case of unsuccessful pairing, long press the middle button to off and restart it to on.If you turn off the device, but the Bluetooth on your device remains open, when you restart the device, the Bluetooth will be connected automatically.Pairing earphone to your device (device should be within 10 meters of your earphone)1. Activate pairing mode on earphone by long pressing “ ”The LED will flash quickly in blue.2. On your device, navigate to the Bluetooth function (refer to the deviceowner’s manual to locate Bluetooth function).3. Select “Set Up” Bluetooth or turn “ON” Bluetooth.4. Select “Search” or “Discover” devices.5. Select “HE8”.6. If requested, type the password or PIN 00007. Press the Enter key.
-6-5. Function GuidanceButton Operation FunctionPress Twice Short Press Press Twice Short Press Long Press 3s Long Press 3s Long Press 3s Short PressShort PressShort PressPower on Power off Play/Pause End a callAnswer a callRefuse answer a callPlay music from your phone Volume down PreviousVolume up Next
LED DisplayFlash quicklySlow flashStay solidOFFWhite Light Stay solid ANC ModeLight indicationPrepare to pairPairedCharging in processFully chargedBlue LightRedLight6. LED Display Status7. Battery ChargingThe device has a built-in rechargeable battery. This can be charged by magnetic adsorption.After charging, the device can be used without the power connection. -7-
8. Product care9. AnnouncementsYour device is designed to be light, compact and durable. As an electronic device it must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects may cause damage. To avoid damaging your device, pleaseDo not drop, crush, bend or apply excessive force to the device.Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places. Clean the unit with a soft cloth or damp chamois leather. Never use solvents. The Unit can only be opened by qualified personnel.This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screen away from this device to avoid damage or malfunction.1. The attached noise isolation earbuds can stick your ears closely, and cancel the environmental noise effectively.2. Long time closing may cause painful feeling, if feeling unwell, please stop using.3. Keep it dry to avoid premature aging.4. Keep it tidy. Use neutral cleaning solvents when you clean the earbuds.5. It designed to stick your ears closely, and hard push or quick remove may make you hurt. The diaphragm may make noise when you putting on the earbuds, it’s not any malfunction. Please remove you earbuds slowly.6. The static electricity accumulated in the body may cause a slight feeling of electric shock. Wearing clothes made of natural materials can reduce the influence to the lowest.7. High volume may influence your hearing. For your traffic safety, please not use while driving or cycling.-8-
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu