MeiDong Acoustics MINIBOOM Bluetooth Speaker User Manual Miniboom II with NFC

Shenzhen MeiDong Acoustics Co., LTD Bluetooth Speaker Miniboom II with NFC

Users Manual

User’s GuideBluetooth SpeakerModel name:MiniboomBrand name:cowinFCC ID:2AB5TMINIBOOM
1. Introduction2. Battery Precaution3. Getting Started4. Cable Connection5. Bluetooth Connection6. NFC Connection7. Microphone Usage8. LED Display Status9. Battery Charging10. Product CarePlease read the following safety warning and precaution before using your device.Contents-1-
50mAh-2-1. Introductioneasily connected with your audio source or video devices during your traveling and daily use. It supports both Bluetooth and line-in usage.SpecificationRechargeable battery with charging option from USB cable Operating range up to 0 metersBattery Capacity: 141Thank you for purchasing the Miniboom system. This device can be
2. Battery PrecautionThe device can be powered by a built-in rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of device.If the device is not used for a long period of time, the battery may be out of power. Please charge the battery. Rechargeable batteries are only to be charged under adult supervision.Use only the supplied USB micro cable to recharge the battery. Improper charging may damage the battery and the device.Do not attempt to open the rechargeable battery or battery pack. There is not serviceable part inside.Should a battery leak, the device may become damaged. Clean the battery compartment immediately, avoiding to touch your skin.Keep the battery out of reach of children. If swallowed, consult a physician immediately. Avoid storing the battery in extremely hot or cold environment. A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Do not dispose batteries in a fire as they may explode. Batteries may also explode if damaged. Please dispose them according to local regulation. Do not dispose them as household waste.-3-
3. Getting Started-4-4.Cable ConnectionAudio input cableAuxPreviousVolume down Volume upBluetooth pairing keyNextPlay/Pause/Answer/end callsON/OFF AUXMicro USBON OFFMicrophone
5. Bluetooth Connection-5-Pairing Miniboom to your smartphone (smartphone should be away from your speaker within 10 meters)1. Activate pairing mode on Miniboom by switching “ON/OFF” button to “ON”. The LED will flash in green color.2. On your smartphone navigate to the Bluetooth function (refer to thesmartphone owner’s manual to locate Bluetooth function).3. Select “Set Up” Bluetooth or turn “ON” Bluetooth.4. Select “Search” or “Discover” devices.5. Select “Bluetooth”.6. If requested, type the password 00007. Press the Enter key.After completing the steps above, a message on your smart phone will appear to confirming that your device is now paired/connected.In case of unsuccessful pairing, Push to “OFF” and restart it to “ON”.1. If you turn off the device, but the Bluetooth on your smartphone remains open, when you restart the device, the Bluetooth will be connected automatically.2. When your smartphone and this speaker are apart beyond bluetooth receiving range, after 10 minutes, this speaker will disconnect with your smartphone and turn into pairing mode. If within 10 minutes your smartphone is back, will connect with this speaker automatically. 3. If long press “ ” button, the speaker will be disconnected and ready to pair with other smartphone.
6. NFC ConnectionNFC: Near Field Communication, is a set of standard for Smartphone and this speaker to establish Bluetooth radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters.-6-7. Microphone usagePlease activate the NFC function (subjects to tablets own setting) of your bluetooth device. Bring your bluetooth device close to speaker, as above picture.Your bluetooth device will ask you whether you need to pair thespeaker, confirm by “Yes” or “OK”, then the pairing process iscompleted. When a phone call comes in, you could talk through the microphone on speaker.Long press pause button, you could call the last number you called on your call records. Note:The NFC tag is passive.
9. Battery ChargingThe device has a built-in rechargeable lithium battery that can be charged by connecting to the USB port of your computer or into an AC adapter which contains a USB port. When charging is completed, the red light will go off.-7-8. LED Display StatusFlash quicklyStay solidNo lightFlash quicklyStay solidLED DisplayIt’s ready to pairIt's pairedPower off/ Full charged　　Low batteryChargingLight indicationGreen LightRed Light
10. Product careYour device is designed to be light, compact and durable. As an electronic device, must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects may cause damage. it-8-Do not drop, crush, bend or apply excessive force to the device. Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places. It is not waterproof. Clean the unit with a soft cloth or damp chamois leather. Never use solvents.The Unit can only be opened by qualified person.This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screen away from this device to avoid damage or malfunction.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu