MeiDong Acoustics QCHOCOLATE Bluetooth Speaker User Manual
Shenzhen MeiDong Acoustics Co., LTD Bluetooth Speaker
user manual
User’s Guide
FCC ID: 2AB5T- QCHOCOLATE
1. Introduction
2. Battery Precautions
3. Getting Started
4. Cable Connection
5. Bluetooth Connection
6. NFC Connection
7. Microphone Usage
8. Charging And LED Indicator Light
9. Product Care
Please read the following safety warnings and precautions before using your device.
Contents
-1-
Qchocolate
Output Power:
S/N:
Frequency range:
Power supply:
Audio source:
Function spec:
Size:
Rechargeable battery with charging option from USB cable
Operating range up to 10 meters
8W
>75dB
60Hz-20KHz
Lithium battery or USB cable
iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc
Bluetooth, Microphone, Line-in
145.0mm x 45.0mm x 55.0mm
1. Introduction
Thank you for purchasing Qchocolate. This device can be easily
connected with audio or video devices for your daily needs. The
QChocolate speaker supports both Bluetooth and Aux-in function.
-2-
Specification
-3-
2. Battery Precautions
The device is power by a built-in rechargeable lithium battery. Please charge
the battery at least 8 hours before your first use of device.
If the device is not used for a long period of time, the battery may be out of
power. please charge the battery.
Rechargeable batteries are only to be charged under adult supervision.
Do not attempt to open the rechargeable battery or battery pack. There are
no serviceable parts inside.
Should a battery leak, the device may become damaged. Clean the battery
compartment immediately, avoiding contact with your skin.
Keep the battery out of reach of children. If swallowed, consult a physician
immediately.
Avoid storing the battery in extremely hot or cold environment. A device
with a hot or cold battery may not work temporarily, even when the battery
is fully charged.
-4-
3. Getting Started
4. Cable Connection
3.5mm stereo jack
USB AUX
USB AUX
AUX
Micro USB
Volume Down
Volume UP
Play/Pause
Next
Previous
NFC
Microphone
OFF/ON
5. Bluetooth Connection
Pairing Qchocolate to your devise (devise should be within 10 meters of
your speaker)
-5-
Activate pairing mode on Qchocolate by pressing “ON/OFF” button.
After prompt voice, the device is in pairing mode and can be searched.
Navigate to the Bluetooth function (refer to the tablet owner’s manual to
locate Bluetooth function).
Select “Set Up” Bluetooth or turn “ON” Bluetooth.
Select “Search” or “Discover” devices.
Select “Qchocolate”
If requested, type the password or PIN 0000
Press the enter key.
After completing the steps above, a message on your devise will appear
confirming that your device is now paired/connected.
In case of unsuccessful pairing, turn off the speaker by long pressing “
ON/OFF” button and restart it.
If you turn off the device, but the Bluetooth on your devise remains open,
when you restart the device, the Bluetooth will be connected automatically.
1.
2.
3.
4.
5.
6.
7.
Notice:
1. If you turn off the device, but the Bluetooth on your devise remains
open, when you restart the device, the Bluetooth will be connected
automatically.
2. When your smartphone and this speaker are apart beyond bluetooth
receiving range, after 10 minutes, this speaker will disconnect with your
smartphone and turn into pairing mode. If within 10 minutes your
smartphone is back, will connect with this speaker automatically.
-6-
6. NFC Connection
7. Microphone Usage
NFC: Near Field Communication, is a set of
standard for smartphone and this speaker to
establish Bluetooth radio communication
with each other by touching them together or
bringing them into close proximity, usually no
more than a few centimeters.
Please activate the NFC function (subjects to
device own setting) function of your Bluetooth device. Bring your Bluetooth
device close to speaker, as above picture.
Bluetooth device will ask you whether you want to pair the speaker, confirm
by “Yes” or “OK”, then the pairing process is completed.
When a phone call comes in, you could talk through the microphone on
speaker.
Tips:
When you make a call from your mobile phone the call will (subject to phone
settings) automatically transfer to your QChocolate.
The indicator light status display as below:
Flash slow
Stay solid
Stay solid
Flash fast Low battery
Charging in process
Fully charged
OFF
LED Display
Green
Light
Red
Light
Light Indication
Ready to pair
Paired
Built-in lithium battery，can be charged through micro USB cable,
see below picture:
8. Charging and LED Indicator Light
-7-
Charging by USB
PC Notebook
9. Product Care
Your device is designed to be heavy and durable. As an electronic
device, it must be treated carefully. Putting unnecessary pressure
on it or striking the device against other objects may cause damage.
USB AUX
-8-
Do not drop, crush, bend or apply excessive force to the device.
Clean the unit with a soft cloth or damp chamois leather. Never use
solvents.
The unit can only be opened by qualified person.
This device contains magnets. Keep magnetic field sensitive products such
as credit cards and video screen away from this device to avoid damage or
malfunction.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment. This device complies
with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
maycause undesired operation.
