Meijiaxin Innovative Technology GR902 RC Drone User Manual 2AHV3GR902 Rev 1

Download:
Mirror Download [FCC.gov]
Document ID	2961038
Application ID	9AgPGtea+TRuifPMLj3hnw==
Document Description	2AHV3GR902_User Manual_Rev 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.98kB (487271 bits)
Date Submitted	2016-04-17 00:00:00
Date Available	2016-04-19 00:00:00
Creation Date	2016-04-13 17:15:28
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2016-04-13 17:24:46
Document Title	2AHV3GR902_User Manual_Rev 1
Document Creator	Adobe Acrobat 7.0

, .,G>
W59 14+
HEM NO .3902
-SER1ES
31) R011- 2.46 - 6-AXls
6»Axis Gyro Quod-copler
INSTRUCTION MANUAL
Technical parameter of the model
Fuselage Length:80mm Grass Weightaboul 19.69
Overall Height:30mm BaueryILi-polymer 3.7V 180mAh
Main Rotor Diameler:38mm MotorICoreless Malor
l Charging Yimezabouk 30 minutes
Productlspare pans included in lhis packaging
Description 0TY(pc) Descriplion OTY(pc) Description QTY(pcl
Model Spare Blades Screwdviver
Remake conuol Manual 055 charger
o Multi—rotor design insures more stable and powerful performance and
make all kinds of 3D action more easier.
0 Innovative designs, easy of installation and convenient for maintenance.
0 By using of the 2.46 auto connection technology, scores of copters can
be played at the same time with high stability.
0 Equipped with the newestS-Axis Gyro control system, this model
has the characteristics of stable flight and easy operation.
a Full charged battery can support 6 minutes steady flight.
Safety Guidelines
0 This product is not a toy. It is not applicable for children who are under
14 years old.
0 Please read this instruction manual carefully before playing and operate
the product according to the manual.
0 The users are in full charge of proper operating the model. The
manufacturer and dealers disclaim all responsibility for the damage
caused by misuse,
. Keep the small accessories away trom the kids to avoid accident.
1 Keep batteries away from fire or high temperature environment.
0 When flying the model, keep it 1~2 meters away from user or others
to avoid injury due to collision.
0 Not to decompose or modify the product which may cause malfunction
or accident.
I Fly the model within your eye vision for easy and safety control.
I Need adult supervision when this model is being played by children.
0 Only batteries of the same or equivalent type as recommended are to be
used.
0 Insert batteries with correct polarity.
o Non rechargeable batteries are not to be charged; the transmitter need
3XAAA batteries for work.
0 Do not mix old and new batteries.
Remote controller
Mhtmfii r'w’tog conical-F ;
0 Adopt microcomputer control remote controller system and 2.46 auto
connection technology, scores of centers can be played at the same
time without any interference.
I Control the function of upward,downward,forward,backward, leftward,
rightward,turn left, turn right and 3D flips & roll of the copter.
Light
Power indicator
Throttle control stick/
High & Low speed switch
Leftlright turning
trimmer
Power switch
Function switch
3D Eversion
Forward/backward
trimmer
Right control stick
Sideward flight
trimmer
Funct ndesc pt n
Light
This is the light switch 0' the model, Press it once to turn
on the light and press It once again to turn on the light,
Power Indicator
Throttle control
speed switcn
stlck/ngh Gt Low
The Indicator light keeps blinking slowly: the transmitter
is not activated.
The ind ator light keeps flashing rapidly: the transmitter
is sen 9 out connectioncl signal to the model.
The indicator light keeps on without blinking: the transmitter
is ready [or controlling the flight
Upward/downwardJurn left/turn right,
This Is the speed toggle switch 0' the remote contrpI.L is
low speed; H is high speed.
trimmer
Power switch
Left/right turning
Leltward/rightward ilne tuning
It controls the power source at the transmittershde the
power switch to the "ON" position, the transmitter is
powered on; slide the power switch to the “OFF" position,
the transmitter is powered oft,
3D Everslan
When the model is llying, press the an eversion batten and
push the right control stick to the topibottomlleft-mostlright-
most at the same time.the model will roll forward/backward]
leftward/rightward accordingly.
J...
I No. l Functionswltch Function description
When the model keeps flying backward, press the upper
Forward/backward button until it gains balance.
trimmer When the model keeps llying loMzrd.press tile lower button
until it gains balance.
3 Right control stick Forwardlbackward.Ieftwardlrightward.
When tne model keeps flying inclined leltward.pvess the
Sideward flight right button untll it gains balance.
trimmer wnen the model keeps flying inclined rightward. press the
left button untll ll gains balance.
‘ "emnfiumomm t
W 6W” 6W
How to remove and insert batteries.
1. Unscrew counter clockwise to open the battery compartment cover.
2. Install 3 X AAA batteries into the battery compartment according to the
given polarity.
3. Screw clockwise to close the battery compartment.
The model
Protecting lrnlnes LED mm" HIM
Rater plea.
tlltme.:‘i"_=llfia-"‘:glniill6uil 1,
Unplug the battery cable (mm the power wire plug and take
out the battery. Insert the USB charger into the USB
interfaceof the computer; connect the battery cable with the \
USB wire plug.The indicator light of the USB will be off when .
charging is proceeding; once the battery is full charged. the ,6
indicator light turns red. Full charging takes about 30 minutes.
NOTE:Battery should be full charged before storing.
E]
P eparation for ghl
The remote control
.Recheck the playground; be sure that it
is free from crowd, animals and other barrier.
.Slide down the throttle control stick to the
bottom.
uTurn on the remote controller and the
power light will blink slowly.
Then slide the throttle control stick up
to the top; the power light blinks at a
higher speed;return the throttle control
stick to the bottom;there will be a beep
sound heard and the power light keeps
flashing which means that the remote
controller is sending out connectional
signal, It will take about 10 seconds to
finish the signal connection process.
Once signal connection is completed. the
power light will stay "on" without blinking
and the remote controller is set for flight,
The model
uMake sure that the battery (at the
bottom of the model) is well installed
and connected with power wire of
model. The model is OFF.
uann on the model; the flash light
will keep flashing quickly, the gyro
of the model will be in signal
detecting condition. Set the model
to flat surface, about 4 seconds later,
the flash light will keep constant “ON".
It means that signal connection is
finished and the model is ready for
flight.
' To ensure steady flight, please set the value of the Trimmer to the midpoint.
’ Push up the throttle stick slowly and the model takes off.
' To ensure steady flight, please set the value of the Trimmer to the midpoint.
' Push up the throttle stick slowly and the model takes off.
0 To avoid any misunderstanding, we have defined the orientation of the
model as follows:The model is set to be copter nose right ahead and tail
facing the player .The copter nose direction is named as “forward”, the
tail direction is named as “backward”. The copterflies up to the sky is
named as “upward”; the copter flies down to the ground is named as
"downward". Player’s left side is named as “left", player‘s right side is
named as “right". All the directions we are talking about in this manual
are subject to the definition above.
Clockwise
Iockwise
Counterclockwise \
Tail of the model
o The orange lights are at the front of the model;
0 When the model is on, checking the rotation direction of the rotor
bladesgthe front-left and right~back rotor blades should be rotating in
clockwise direction; the right-front and left-back rotor blades should
be rotating in counter—clockwise direction.
0 If the model keeps flying to one side, it can be corrected by adjusting
the trimmer on the remote control.
Remarks :
I Signal connection between the model and the remote control is required
lor the flrst use.
0 Set the connectlon one by one to avoid signal connection error.
0 To better protect the battery, please unplug the battery cable from the
power wire afterthe use.
T mmer Functions
1.lf the model keeps moving forward/backward even there is no control
signal given, users may adjust forwardlbackward trimmer to keep the
model balanced.
It the model keeps moving forward, press the
lower button o! the trimmer until it gains
balance.
’ It the model keeps moving backward. press the
upper button of the trimmer until it gains
balance.
2. It the model keeps moving leftward/rightward even there is no control
signal given, users may adjust the leftward/rightward trimmer to keep
the model balanced.
If the model keeps moving leftward, press the
right button of the lettwardlrightward trimmer
until it gains balance.
If the model keeps moving rightward, press the
lett button of the lettwardlrightward trimmer
until it gains balance.
3. It the model keeps spinning even there is no control signal given,
users may adjust the turn lettlturn right trimmer to keep the model
balanced.
It the model keeps spinning counterclockwise
in the air, press the right button of the turn
left/turn right trimmer until it gains balance.
If the model keeps spinning clockwise in the
air, press the left button of the turn Ielt/turn
right trimmer until it gains balance.
[El
U pward
Downward
Turn left
Push up the throttle
control stick, the rotation
speeds of the mains
rotors are increasing and
the model ascends
accordingly.
Push down the throttle
control stick, the rotation
speeds of the mains
rotors are decreasing and
the model descends
accordingly.
Turn the left/right turning
control stick to the left,tho
model will turn left.
Turn right
Turn the left/right turning
control stick to the right,the
model will turn right.
Forward
Backward
When the model is flying,
push up the
forward/backward control
stick, the model will move
forward.
When the model is flying,
push down the
forward/backward control
stick, the model will move
backward.
Leftward
nigm
Turn the sideward flight
control stick to the loft
side,the model will fly
leftward‘
Rightward
nigm
Turn the sideward flight
control stick «a the right
siduhl model will fly
Iightward‘
/.r 009
, k Ill 0
//
Fifi No Fan Niml DVYVMI 7m No Fan Name BTW”) Fl" N0 9!" Mama OYVflIcsb
om album I an: ac: , mu "II"! "We 1
am \ng covertltflr 7 (XI: Mglll mummy 2 WA cinemas: mowv 2
mm.
am dock-ms: made 2 m hungry ‘ W7 gums/‘5: we! 7
mm
am mm. m. 2
T uble shoot I
phenomenon
reason solution
. . . Gym or the model is signal Set the model to any
"'9 "Ems 3" "ism"? qu'Cle- detecting condition. llat surtace.
For absence of signal.
The model is not activalfftne gemole l
a i ‘5 e 5 ice received the signal tram the contra on e si ha
and iigghin‘; 021:3? on M remote control or signal ponnectidanor s gnal
connection is interrupted. lnlerrupllon.turn 0" the
remote control and
turn it on again.
Charge the battery or
change another lull
charged batlery.
The model is
The lights are llashing on and
underpowered.
o".
The rotor blade is out to!
shape.
The model is snaking fiercely. change the rotor blades.
a) Changes or modifications not expressly approved by the party responsible tor compliance
could void the user's authority to operate the equipment.
bi Note: this equipment has tieen tested and round to comply with the limits tor a Class a
digital device, pursuant to part 15 olthe FCC Rules. These limits are designed to provide
reasonable protection against harmlul interterence in a residential installation. this
equipment generates, uses and can radiate radio lrequency energy and. it not installed and
used in accordance with the instructions, may cause hannlul interterence to radio
communications. However. there is no guarantee that interterence will not occur in a
particular installation. it this equipment does cause harmtul interlerence to radio or
television reception. which can tie determined by turning the equipment on and on. the user
is encouraged to try to correct the interlerence by one or more or the lotlowing measures:
—Reonent or relocate the receiving antenna.
—lncrease the separation oerween the equipment and receiver.
—t:onnect the equipment into an outlet on a clrcu' dinerent lrom that to which the receiver
is connected.
~Cunsult the dealer or an experienced radiorrv technician lor help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:04:13 17:15:28+08:00
Creator                         : Adobe Acrobat 7.0
Modify Date                     : 2016:04:13 17:24:46+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:04:13 17:24:46+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:b8707d99-ebb5-4a80-ab23-211bfa17dc1b
Instance ID                     : uuid:2263bd20-93e2-4e9f-822f-4a205a7b5bb1
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 10

EXIF Metadata provided by EXIF.tools